Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-20 10:28:05
From: carlson
Description: FreeBSD/arm64 on raspberrypi rpi
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Type Physical Virtual #Pages Attr
Reserved 000000000000 0 00000001 WB
ConventionalMemory 000000001000 0 00007fff WB
RuntimeServicesData 000008000000 8000000 00000008 WB RUNTIME
ConventionalMemory 000008009000 0 00027d3d WB
LoaderData 00002fd46000 2fd46000 00000001 WB
Reserved 00002fd47000 2fd47000 00000001 WB
LoaderData 00002fd48000 2fd48000 00004000 WB
LoaderData 000033d48000 33d48000 00004000 WB
LoaderCode 000037d48000 37d48000 00000068 WB
LoaderData 000037db0000 37db0000 00000001 WB
LoaderData 000037db1000 37db1000 00000068 WB
Reserved 000037e19000 37e19000 00000001 WB
LoaderData 000037e1a000 37e1a000 00000001 WB
LoaderData 000037e1b000 37e1b000 00000001 WB
LoaderData 000037e1c000 37e1c000 00001001 WB
LoaderData 000038e1d000 38e1d000 00001001 WB
LoaderData 000039e1e000 39e1e000 00000101 WB
LoaderCode 000039f1f000 39f1f000 00000015 WB
Reserved 000039f34000 39f34000 00000001 WB
Reserved 000039f35000 39f35000 00000001 WB
RuntimeServicesData 000039f36000 39f36000 00000001 WB RUNTIME
Reserved 000039f37000 39f37000 00000001 WB
Reserved 000039f38000 39f38000 00000001 WB
Reserved 000039f39000 39f39000 00000001 WB
Reserved 000039f3a000 39f3a000 00000001 WB
Reserved 000039f3b000 39f3b000 00000001 WB
Reserved 000039f3c000 39f3c000 00000001 WB
Reserved 000039f3d000 39f3d000 00000001 WB
Reserved 000039f3e000 39f3e000 00000001 WB
LoaderData 000039f3f000 39f3f000 0000146b WB
RuntimeServicesCode 00003b3aa000 3b3aa000 00000001 WB RUNTIME
LoaderData 00003b3ab000 39f3f000 00000055 WB
MemoryMappedIO 00003f100000 3f100000 00000001 RUNTIME
Physical memory chunk(s):
0x00001000 - 0x08007fff, 128 MB ( 32775 pages)
0x08009000 - 0x2fd46fff, 637 MB ( 163134 pages)
0x2fd48000 - 0x37e18fff, 128 MB ( 32977 pages)
0x37e1a000 - 0x39f33fff, 33 MB ( 8474 pages)
0x39f36000 - 0x39f36fff, 0 MB ( 1 pages)
0x39f3f000 - 0x3b3a9fff, 20 MB ( 5227 pages)
0x3b3ab000 - 0x3b3fffff, 0 MB ( 85 pages)
Excluded memory regions:
0x00000000 - 0x00000fff, 0 MB ( 1 pages) NoAlloc
0x08000000 - 0x08007fff, 0 MB ( 8 pages) NoAlloc
0x2fd47000 - 0x2fd47fff, 0 MB ( 1 pages) NoAlloc
0x2fe00000 - 0x31431fff, 22 MB ( 5682 pages) NoAlloc
0x37e19000 - 0x37e19fff, 0 MB ( 1 pages) NoAlloc
0x39f34000 - 0x39f3efff, 0 MB ( 11 pages) NoAlloc
0x3b3aa000 - 0x3b3aafff, 0 MB ( 1 pages) NoAlloc
0x3eaf0000 - 0x3ebfafff, 1 MB ( 267 pages) NoAlloc
0x3f100000 - 0x3f100fff, 0 MB ( 1 pages) NoAlloc
Found 4 CPUs in the device tree
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA8 #5 r339234: Wed Oct 10 00:28:55 PDT 2018
[_EMAIL_XXXXXXX]:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 656x416
Preloaded elf kernel "/boot/kernel/kernel" at 0xffff00000140e000.
Preloaded boot_entropy_cache "/boot/entropy" at 0xffff00000140f0f0.
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: read 3840 bytes from preloaded cache
random: unblocking device.
arc4random: read 32 bytes from preloaded cache
VIMAGE (virtualized network stack) enabled
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
random: entropy device external interface
MAP 8000000 mode 2 pages 8
MAP 39f36000 mode 2 pages 1
MAP 3b3aa000 mode 2 pages 1
EFI Runtime entry 32 mapping attributes unsupported
MAP 3f100000 mode 1 pages 1
nfslock: pseudo-device
crypto: <crypto core>
kbd0 at kbdmux0
mem: <memory>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
psci0: PSCI version 0.2 compatible
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
Processing 1 pin-config node(s) in pinctrl-0 for serial@7e201000
Processing 2 pin-config node(s) in pinctrl-0 for spi@7e204000
gpio0: set pin 9 to func 4
gpio0: set pin 10 to func 4
gpio0: set pin 11 to func 4
gpio0: set pin 8 to func 1
gpio0: set pin 7 to func 1
Processing 1 pin-config node(s) in pinctrl-0 for i2c@7e804000
gpio0: set pin 2 to func 4
gpio0: set pin 3 to func 4
Processing 1 pin-config node(s) in pinctrl-0 for mmc@7e300000
gpio0: set pin 48 to func 7, pull 0
gpio0: set pin 49 to func 7, pull 2
gpio0: set pin 50 to func 7, pull 2
gpio0: set pin 51 to func 7, pull 2
gpio0: set pin 52 to func 7, pull 2
gpio0: set pin 53 to func 7, pull 2
Processing 1 pin-config node(s) in pinctrl-0 for audio
gpio0: set pin 40 to func 4
gpio0: set pin 41 to func 4
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
efirtc0: cannot read EFI realtime clock, error 5
ofwbus0: <framebuffer@3eaf0000> mem 0x3eaf0000-0x3ebfa7ff compat simple-framebuffer (no driver attached)
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
simplebus0: <cprman@7e101000> mem 0x7e101000-0x7e102fff compat brcm,bcm2835-cprman (no driver attached)
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f on simplebus0
bcmrng0: RNG_CTRL (00000001)
RNG_COMBLK2_OSC (00)
Oscillator 1 enabled
Oscillator 2 enabled
Oscillator 3 enabled
Oscillator 4 enabled
Oscillator 5 enabled
Oscillator 6 enabled
RNG_COMBLK1_OSC (00)
Oscillator 1 enabled
Oscillator 2 enabled
Oscillator 3 enabled
Oscillator 4 enabled
Oscillator 5 enabled
Oscillator 6 enabled
RNG_JCLK_BYP_DIV_CNT (00)
APB clock frequency / 2
RNG_JCLK_BYP_SRC:
Use RNG clock (APB clock)
RNG_JCLK_BYP_SEL:
Use internal jitter clock
RNG_RBGEN_BIT: RBG enabled
RNG_CTRL (0404005f)
RND_VAL: 04
RND_WARM_CNT: 4005f
RNG_FF_THRES: 00002
RNG_INT_MASK: interrupt enabledmbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 24 on simplebus0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
simplebus0: <mmc@7e202000> mem 0x7e202000-0x7e2020ff irq 25 disabled compat brcm,bcm2835-sdhost (no driver attached)
simplebus0: <i2s@7e203000> mem 0x7e203000-0x7e203023 disabled compat brcm,bcm2835-i2s (no driver attached)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 26 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
simplebus0: <i2c@7e205000> mem 0x7e205000-0x7e205fff irq 27 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <pixelvalve@7e206000> mem 0x7e206000-0x7e2060ff irq 28 disabled compat brcm,bcm2835-pixelvalve0 (no driver attached)
simplebus0: <pixelvalve@7e207000> mem 0x7e207000-0x7e2070ff irq 29 disabled compat brcm,bcm2835-pixelvalve1 (no driver attached)
simplebus0: <dsi@7e209000> mem 0x7e209000-0x7e209077 irq 30 compat brcm,bcm2835-dsi0 (no driver attached)
simplebus0: <thermal@7e212000> mem 0x7e212000-0x7e212007 compat brcm,bcm2837-thermal (no driver attached)
simplebus0: <aux@0x7e215000> mem 0x7e215000-0x7e215007 irq 31 compat brcm,bcm2835-aux (no driver attached)
simplebus0: <serial@7e215040> mem 0x7e215040-0x7e21507f irq 32 disabled compat brcm,bcm2835-aux-uart (no driver attached)
simplebus0: <spi@7e215080> mem 0x7e215080-0x7e2150bf irq 33 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <spi@7e2150c0> mem 0x7e2150c0-0x7e2150ff irq 34 disabled compat brcm,bcm2835-aux-spi (no driver attached)
simplebus0: <pwm@7e20c000> mem 0x7e20c000-0x7e20c027 disabled compat brcm,bcm2835-pwm (no driver attached)
simplebus0: <hvs@7e400000> mem 0x7e400000-0x7e405fff irq 35 disabled compat brcm,bcm2835-hvs (no driver attached)
simplebus0: <dsi@7e700000> mem 0x7e700000-0x7e70008b irq 36 disabled compat brcm,bcm2835-dsi1 (no driver attached)
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 37 on simplebus0
simplebus0: <i2c@7e805000> mem 0x7e805000-0x7e805fff irq 38 disabled compat brcm,bcm2835-i2c (no driver attached)
simplebus0: <vec@7e806000> mem 0x7e806000-0x7e806fff irq 39 disabled compat brcm,bcm2835-vec (no driver attached)
simplebus0: <pixelvalve@7e807000> mem 0x7e807000-0x7e8070ff irq 40 disabled compat brcm,bcm2835-pixelvalve2 (no driver attached)
simplebus0: <hdmi@7e902000> mem 0x7e902000-0x7e9025ff,0x7e808000-0x7e8080ff irq 41,42 disabled compat brcm,bcm2835-hdmi (no driver attached)
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 43,44 on simplebus0
usbus0 on bcm283x_dwcotg0
bcm283x_dwcotg0: usbpf: Attached
simplebus0: <v3d@7ec00000> mem 0x7ec00000-0x7ec00fff irq 45 disabled compat brcm,vc4-v3d (no driver attached)
simplebus0: <gpu> disabled compat brcm,bcm2835-vc4 (no driver attached)
simplebus0: <dpi@7e208000> mem 0x7e208000-0x7e20808b disabled compat brcm,bcm2835-dpi (no driver attached)
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 46 on simplebus0
sdhci_bcm0: SDHCI frequency: 200MHz
sdhci_bcm0-slot0: 200MHz HS 4bits VDD: 3.3V VCCQ: 3.3V DRV: B PIO removable
sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
sdhci_bcm0-slot0: Sys addr: 0x00000000 | Version: 0x00009902
sdhci_bcm0-slot0: Blk size: 0x00007200 | Blk cnt: 0x00000000
sdhci_bcm0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_bcm0-slot0: Present: 0x01ff0000 | Host ctl: 0x00000002
sdhci_bcm0-slot0: Power: 0x0000000f | Blk gap: 0x00000000
sdhci_bcm0-slot0: Wake-up: 0x00000000 | Clock: 0x00000207
sdhci_bcm0-slot0: Timeout: 0x0000000e | Int stat: 0x00000000
sdhci_bcm0-slot0: Int enab: 0x027f003b | Sig enab: 0x00000000
sdhci_bcm0-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000
sdhci_bcm0-slot0: Caps: 0x00000000 | Caps2: 0x00000000
sdhci_bcm0-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000
sdhci_bcm0-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000
sdhci_bcm0-slot0: ===========================================
sdhci_bcm0-slot0: Card inserted
mmc0: <MMC/SD bus> on sdhci_bcm0
simplebus0: <firmwarekms@7e600000> mem 0x7e600000-0x7e6000ff irq 47 disabled compat raspberrypi,rpi-firmware-kms (no driver attached)
simplebus0: <smi@7e600000> mem 0x7e600000-0x7e6000ff irq 48 disabled compat brcm,bcm2835-smi (no driver attached)
simplebus0: <axiperf> mem 0x7e009800-0x7e0098ff,0x7ee08000-0x7ee080ff disabled compat brcm,bcm2835-axiperf (no driver attached)
simplebus0: <gpiomem> mem 0x7e200000-0x7e200fff compat brcm,bcm2835-gpiomem (no driver attached)
simplebus0: <firmware> compat raspberrypi,bcm2835-firmware (no driver attached)
simplebus0: <power> compat raspberrypi,bcm2835-power (no driver attached)
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fbd0 on fb0
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 24bpp
fb0: fbswap: 1, pitch 1968, base 0x3eb33000, screen_size 818688
simplebus0: <vchiq> mem 0x7e00b840-0x7e00b84e irq 49 compat brcm,bcm2835-vchiq (no driver attached)
simplebus0: <vcsm> compat raspberrypi,bcm2835-vcsm (no driver attached)
simplebus0: <audio> compat brcm,bcm2835-audio (no driver attached)
pmu0: <Performance Monitoring Unit> irq 50 on simplebus0
simplebus0: <virtgpio> compat brcm,bcm2835-virtgpio (no driver attached)
simplebus0: <expgpio> compat brcm,bcm2835-expgpio (no driver attached)
ofwbus0: <phy> compat usb-nop-xceiv (no driver attached)
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu0: Nominal frequency 1200Mhz
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
arm64_cpu0: register <0>
cpu1: <Open Firmware CPU> on cpulist0
cpu1: Nominal frequency 1200Mhz
arm64_cpu1: register <1>
cpu2: <Open Firmware CPU> on cpulist0
cpu2: Nominal frequency 1200Mhz
arm64_cpu2: register <2>
cpu3: <Open Firmware CPU> on cpulist0
cpu3: Nominal frequency 1200Mhz
arm64_cpu3: register <3>
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
gpioled0: <led1> failed to map pin
cryptosoft0: <software crypto>
crypto: assign cryptosoft0 driver id 0, flags 0x6000000
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 34 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 35 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 36 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 37 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0
crypto: cryptosoft0 registers alg 38 flags 0 maxoplen 0
Found SMCCC version 1.0
Device configuration finished.
procfs registered
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
arc4random: read 32 bytes from preloaded cache
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 8192
IPsec: Initialized Security Association Processing.
usbus0: 480Mbps High Speed USB v2.0
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
sdhci_bcm0-slot0: Divider 250 for freq 400000 (base 200000000)
mmc0: Probing bus
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x40ff8000)
mmc0: Current OCR: 0x00ff8000
mmc0: Probing cards
mmc0: New card detected (CID 035344534c31364780d38b4bac011500)
mmc0: New card detected (CSD 400e00325b59000076b27f800a404000)
mmc0: Card at relative address 0xaaaa added:
mmc0: card: SDHC SL16G 8.0 SN D38B4BAC MFG 05/2017 by 3 SD
mmc0: quirks: 0
mmc0: bus: 4bit, 50MHz (high speed timing)
mmc0: memory: 31116288 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
sdhci_bcm0-slot0: Divider 2 for freq 50000000 (base 200000000)
mmcsd0: 16GB <SDHC SL16G 8.0 SN D38B4BAC MFG 05/2017 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits high speed timing
bcm2835_cpufreq0: Boot settings:
bcm2835_cpufreq0: current ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
bcm2835_cpufreq0: max/min ARM 1200/600MHz, Core 400/250MHz, SDRAM 450/400MHz
bcm2835_cpufreq0: current Core 1200mV, SDRAM_C 1200mV, SDRAM_I 1200mV, SDRAM_P 1200mV
bcm2835_cpufreq0: max/min Core 1281/1200mV, SDRAM_C 1200/1200mV, SDRAM_I 1200/1200mV, SDRAM_P 1200/1200mV
bcm2835_cpufreq0: Temperature 39.1C
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-D38B4BAC, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-D38B4BAC, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufsid/5b37cfe0650831ff, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-D38B4BACs2, BSD) is not aligned on 4194304 bytes
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0: OUI 0x00800f, model 0x000c, rev. 3
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: bpf attached
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
ugen0.4: <JMicron USB to ATA/ATAPI bridge> at usbus0
umass0 on uhub1
umass0: <MSC Bulk-Only Transfer> on usbus0
umass0:0:0: Attached to scbus0
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00
(probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
GEOM: new disk da0
pass0 at umass-sim0 bus 0 scbus0 target 0 lun 0
pass0: <ST316021 5A > Fixed Direct Access SPC-3 SCSI device
pass0: [_SERIAL_NUMBER_XXXXXXXXX]
pass0: 40.000MB/s transfers
Release APs...done
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <ST316021 5A > Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da0: Delete methods: <NONE(*),ZERO>
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Trying to mount root from ufs:/dev/da0p3 []...
Instruction Set Attributes 0 = <CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <0>
Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
Debug Features 1 = <0>
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
GEOM_PART: partition 1 on (diskid/DISK-D38B4BAC, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-D38B4BAC, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (ufsid/5b37cfe0650831ff, BSD) is not aligned on 4194304 bytes
GEOM_PART: partition 1 on (diskid/DISK-D38B4BACs2, BSD) is not aligned on 4194304 bytes
lo0: link state changed to UP
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ue0: link state changed to UP