Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-20 20:38:57
From: andreast
Description: FreeBSD/arm on a Wandboard
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-ALPHA10 #25: Wed Oct 17 11:13:24 CEST 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/arm.armv7/sys/WANDQUAD arm
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT: init without driver.
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions:
UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 0 (0 MB)
avail memory = 2090749952 (1993 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 47,48,49 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 45,46 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 11 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: Warning: L2 Cache should not already be active; trying to de-activate and re-initialize...
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 160
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 28,29 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 30,31 on simplebus1
gpiobus1: <GPIO bus> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 32,33 on simplebus1
gpiobus2: <GPIO bus> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 34,35 on simplebus1
gpiobus3: <GPIO bus> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 36,37 on simplebus1
gpiobus4: <GPIO bus> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 38,39 on simplebus1
gpiobus5: <GPIO bus> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 40,41 on simplebus1
gpiobus6: <GPIO bus> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 43 on simplebus1
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 10 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 7 on simplebus0
uart2: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart2: console (115200,n,8,1)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
gpioc5: <GPIO controller> on gpio5
gpioc6: <GPIO controller> on gpio6
snvs0: <i.MX6 SNVS RTC> mem 0x20cc000-0x20cffff on simplebus1
snvs0: registered as a time-of-day clock, resolution 0.000030s
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 1 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: [_MAC_XXXXXXXXXX]
sdhci_fsl0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
sdhci_fsl1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
mmc0: <MMC/SD bus> on sdhci_fsl1
sdhci_fsl2: <Freescale uSDHC controller> mem 0x2198000-0x219bfff irq 84 on simplebus3
mmc1: <MMC/SD bus> on sdhci_fsl2
imx_i2c0: <Freescale i.MX I2C> mem 0x21a0000-0x21a3fff irq 86 on simplebus3
imx_i2c1: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
uart3: <Freescale i.MX UART> mem 0x21ec000-0x21effff irq 96 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 13,14 on simplebus0
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 15 on simplebus0
ahci0: AHCI v1.30 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmc0: No compatible cards found on bus
mmcsd0: 8GB <SDHC USDU1 2.0 SN 3BE0133E MFG 12/2015 by 116 J`> at mmc1 50.0MHz/4bit/65535-block
iicbus0: <OFW I2C bus> on imx_i2c0
iic0: <I2C generic I/O> on iicbus0
hdmi0: HDMI controller 13:0a:a0:c1
iicbus1: <OFW I2C bus> on imx_i2c1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0x14
Release APs
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen1.2: <Freecom Freecom Hard Drive XS> at usbus1
umass0 on uhub1
umass0: <Bulk Only Interface> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <Freecom Hard Drive XS 1.00> Fixed Direct Access SPC-2 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 152627MB (312581808 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
lo0: link state changed to UP
ffec0: link state changed to DOWN
ffec0: link state changed to UP