Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-23 09:11:03
From: matas
Description: FreeBSD/amd64 on HP ProLiant DL380p Gen8
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.4-RELEASE-p12 #0: Thu Sep 13 11:08:58 CEST 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
CPU: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (2593.56-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 137438953472 (131072 MB)
avail memory = 133598605312 (127409 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs
FreeBSD/SMP: 2 package(s) x 8 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 8
cpu9 (AP): APIC ID: 9
cpu10 (AP): APIC ID: 10
cpu11 (AP): APIC ID: 11
cpu12 (AP): APIC ID: 12
cpu13 (AP): APIC ID: 13
cpu14 (AP): APIC ID: 14
cpu15 (AP): APIC ID: 15
cpu16 (AP): APIC ID: 32
cpu17 (AP): APIC ID: 33
cpu18 (AP): APIC ID: 34
cpu19 (AP): APIC ID: 35
cpu20 (AP): APIC ID: 36
cpu21 (AP): APIC ID: 37
cpu22 (AP): APIC ID: 38
cpu23 (AP): APIC ID: 39
cpu24 (AP): APIC ID: 40
cpu25 (AP): APIC ID: 41
cpu26 (AP): APIC ID: 42
cpu27 (AP): APIC ID: 43
cpu28 (AP): APIC ID: 44
cpu29 (AP): APIC ID: 45
cpu30 (AP): APIC ID: 46
cpu31 (AP): APIC ID: 47
random: <Software, Yarrow> initialized
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20160527/tbfadt-733)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20160527/tbfadt-733)
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
cpu16: <ACPI CPU> on acpi0
cpu17: <ACPI CPU> on acpi0
cpu18: <ACPI CPU> on acpi0
cpu19: <ACPI CPU> on acpi0
cpu20: <ACPI CPU> on acpi0
cpu21: <ACPI CPU> on acpi0
cpu22: <ACPI CPU> on acpi0
cpu23: <ACPI CPU> on acpi0
cpu24: <ACPI CPU> on acpi0
cpu25: <ACPI CPU> on acpi0
cpu26: <ACPI CPU> on acpi0
cpu27: <ACPI CPU> on acpi0
cpu28: <ACPI CPU> on acpi0
cpu29: <ACPI CPU> on acpi0
cpu30: <ACPI CPU> on acpi0
cpu31: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci7: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 1.1 on pci0
pci19: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib3
bxe0: <QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.90
> mem 0xf6000000-0xf67fffff,0xf5800000-0xf5ffffff,0xf57f0000-0xf57fffff irq 32 at device 0.0 on pci3
bxe0: PCI BAR0 [10] memory allocated: 0xf6000000-0xf67fffff (8388608) -> 0xfffff800f6000000
bxe0: PCI BAR2 [18] memory allocated: 0xf5800000-0xf5ffffff (8388608) -> 0xfffff800f5800000
bxe0: PCI BAR4 [20] memory allocated: 0xf57f0000-0xf57fffff (65536) -> 0xfffff800f57f0000
bxe0: Found 10GBase-T media.
bxe0: IFMEDIA flags : 20
bxe0: Using defaults for TSO: 65518/35/2048
bxe0: Ethernet address: [_MAC_XXXXXXXXXX]
bxe0: MSI-X vectors Requested 5 and Allocated 5
bxe1: <QLogic NetXtreme II BCM57810 10GbE (B0) BXE v:1.78.90
> mem 0xf4800000-0xf4ffffff,0xf4000000-0xf47fffff,0xf3ff0000-0xf3ffffff irq 36 at device 0.1 on pci3
bxe1: PCI BAR0 [10] memory allocated: 0xf4800000-0xf4ffffff (8388608) -> 0xfffff800f4800000
bxe1: PCI BAR2 [18] memory allocated: 0xf4000000-0xf47fffff (8388608) -> 0xfffff800f4000000
bxe1: PCI BAR4 [20] memory allocated: 0xf3ff0000-0xf3ffffff (65536) -> 0xfffff800f3ff0000
bxe1: Found 10GBase-T media.
bxe1: IFMEDIA flags : 20
bxe1: Using defaults for TSO: 65518/35/2048
bxe1: Ethernet address: [_MAC_XXXXXXXXXX]
bxe1: MSI-X vectors Requested 5 and Allocated 5
pcib4: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci20: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci2: <ACPI PCI bus> on pcib5
ciss0: <HP Smart Array P420i> port 0x5000-0x50ff mem 0xf7f00000-0xf7ffffff,0xf7ef0000-0xf7ef03ff irq 34 at device 0.0 on pci2
ciss0: PERFORMANT Transport
pcib6: <ACPI PCI-PCI bridge> at device 2.3 on pci0
pci21: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 3.1 on pci0
pci22: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.2 on pci0
pci23: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 3.3 on pci0
pci24: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci26: <ACPI PCI bus> on pcib11
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xf6c60000-0xf6c603ff irq 21 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib12: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci10: <ACPI PCI bus> on pcib12
pcib13: <ACPI PCI-PCI bridge> at device 28.7 on pci0
pci1: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> mem 0xf2000000-0xf2ffffff,0xf7de0000-0xf7de3fff,0xf7000000-0xf77fffff irq 16 at device 0.1 on pci1
vgapci0: Boot video device
uhci0: <HP iLO Standard Virtual USB controller> port 0x3c00-0x3c1f irq 16 at device 0.4 on pci1
usbus1 on uhci0
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xf6c50000-0xf6c503ff irq 20 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
pcib14: <PCI-PCI bridge> at device 30.0 on pci0
pci25: <PCI bus> on pcib14
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Patsburg SATA600 controller> port 0x4000-0x4007,0x4008-0x400b,0x4010-0x4017,0x4018-0x401b,0x4020-0x402f,0x4030-0x403f irq 17 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pcib15: <ACPI Host-PCI bridge> on acpi0
pci32: <ACPI PCI bus> on pcib15
pcib16: <PCI-PCI bridge> at device 0.0 on pci32
pci49: <PCI bus> on pcib16
pcib17: <ACPI PCI-PCI bridge> at device 1.0 on pci32
pci42: <ACPI PCI bus> on pcib17
pcib18: <ACPI PCI-PCI bridge> at device 1.1 on pci32
pci43: <ACPI PCI bus> on pcib18
pcib19: <ACPI PCI-PCI bridge> at device 2.0 on pci32
pci39: <ACPI PCI bus> on pcib19
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xfbf80000-0xfbffffff,0xfbf70000-0xfbf73fff irq 62 at device 0.0 on pci39
igb0: Using MSIX interrupts with 9 vectors
igb0: Ethernet address: [_MAC_XXXXXXXXXX]
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
igb0: Bound queue 4 to cpu 4
igb0: Bound queue 5 to cpu 5
igb0: Bound queue 6 to cpu 6
igb0: Bound queue 7 to cpu 7
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xfbe80000-0xfbefffff,0xfbe70000-0xfbe73fff irq 61 at device 0.1 on pci39
igb1: Using MSIX interrupts with 9 vectors
igb1: Ethernet address: [_MAC_XXXXXXXXXX]
igb1: Bound queue 0 to cpu 8
igb1: Bound queue 1 to cpu 9
igb1: Bound queue 2 to cpu 10
igb1: Bound queue 3 to cpu 11
igb1: Bound queue 4 to cpu 12
igb1: Bound queue 5 to cpu 13
igb1: Bound queue 6 to cpu 14
igb1: Bound queue 7 to cpu 15
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xfbd80000-0xfbdfffff,0xfbd70000-0xfbd73fff irq 60 at device 0.2 on pci39
igb2: Using MSIX interrupts with 9 vectors
igb2: Ethernet address: [_MAC_XXXXXXXXXX]
igb2: Bound queue 0 to cpu 16
igb2: Bound queue 1 to cpu 17
igb2: Bound queue 2 to cpu 18
igb2: Bound queue 3 to cpu 19
igb2: Bound queue 4 to cpu 20
igb2: Bound queue 5 to cpu 21
igb2: Bound queue 6 to cpu 22
igb2: Bound queue 7 to cpu 23
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem 0xfbc80000-0xfbcfffff,0xfbc70000-0xfbc73fff irq 56 at device 0.3 on pci39
igb3: Using MSIX interrupts with 9 vectors
igb3: Ethernet address: [_MAC_XXXXXXXXXX]
igb3: Bound queue 0 to cpu 24
igb3: Bound queue 1 to cpu 25
igb3: Bound queue 2 to cpu 26
igb3: Bound queue 3 to cpu 27
igb3: Bound queue 4 to cpu 28
igb3: Bound queue 5 to cpu 29
igb3: Bound queue 6 to cpu 30
igb3: Bound queue 7 to cpu 31
pcib20: <ACPI PCI-PCI bridge> at device 2.1 on pci32
pci44: <ACPI PCI bus> on pcib20
pcib21: <ACPI PCI-PCI bridge> at device 2.2 on pci32
pci36: <ACPI PCI bus> on pcib21
pcib22: <ACPI PCI-PCI bridge> at device 2.3 on pci32
pci45: <ACPI PCI bus> on pcib22
pcib23: <ACPI PCI-PCI bridge> at device 3.0 on pci32
pci33: <ACPI PCI bus> on pcib23
pcib24: <ACPI PCI-PCI bridge> at device 3.1 on pci32
pci46: <ACPI PCI bus> on pcib24
pcib25: <ACPI PCI-PCI bridge> at device 3.2 on pci32
pci47: <ACPI PCI bus> on pcib25
pcib26: <ACPI PCI-PCI bridge> at device 3.3 on pci32
pci48: <ACPI PCI bus> on pcib26
acpi_tz0: <Thermal Zone> on acpi0
acpi_syscontainer0: <System Container> port 0x2e-0x2f on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8-0x2ff irq 3 on isa0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est5 attach returned 6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est6 attach returned 6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est7 attach returned 6
est8: <Enhanced SpeedStep Frequency Control> on cpu8
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est8 attach returned 6
est9: <Enhanced SpeedStep Frequency Control> on cpu9
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est9 attach returned 6
est10: <Enhanced SpeedStep Frequency Control> on cpu10
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est10 attach returned 6
est11: <Enhanced SpeedStep Frequency Control> on cpu11
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est11 attach returned 6
est12: <Enhanced SpeedStep Frequency Control> on cpu12
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est12 attach returned 6
est13: <Enhanced SpeedStep Frequency Control> on cpu13
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est13 attach returned 6
est14: <Enhanced SpeedStep Frequency Control> on cpu14
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est14 attach returned 6
est15: <Enhanced SpeedStep Frequency Control> on cpu15
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est15 attach returned 6
est16: <Enhanced SpeedStep Frequency Control> on cpu16
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est16 attach returned 6
est17: <Enhanced SpeedStep Frequency Control> on cpu17
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est17 attach returned 6
est18: <Enhanced SpeedStep Frequency Control> on cpu18
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est18 attach returned 6
est19: <Enhanced SpeedStep Frequency Control> on cpu19
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est19 attach returned 6
est20: <Enhanced SpeedStep Frequency Control> on cpu20
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est20 attach returned 6
est21: <Enhanced SpeedStep Frequency Control> on cpu21
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est21 attach returned 6
est22: <Enhanced SpeedStep Frequency Control> on cpu22
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est22 attach returned 6
est23: <Enhanced SpeedStep Frequency Control> on cpu23
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est23 attach returned 6
est24: <Enhanced SpeedStep Frequency Control> on cpu24
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est24 attach returned 6
est25: <Enhanced SpeedStep Frequency Control> on cpu25
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 212500001e00
device_attach: est25 attach returned 6
est26: <Enhanced SpeedStep Frequency Control> on cpu26
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est26 attach returned 6
est27: <Enhanced SpeedStep Frequency Control> on cpu27
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est27 attach returned 6
est28: <Enhanced SpeedStep Frequency Control> on cpu28
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est28 attach returned 6
est29: <Enhanced SpeedStep Frequency Control> on cpu29
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est29 attach returned 6
est30: <Enhanced SpeedStep Frequency Control> on cpu30
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est30 attach returned 6
est31: <Enhanced SpeedStep Frequency Control> on cpu31
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 20fc00001e00
device_attach: est31 attach returned 6
Timecounters tick every 1.000 msec
random: unblocking device.
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
ugen1.1: <HP UHCI root HUB> at usbus1
uhub0: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ugen1.2: <BMC Virtual Keyboard> at usbus1
ukbd0: <Virtual Keyboard > on usbus1
kbd2 at ukbd0
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen2.2: <vendor 0x8087 product 0x0024> at usbus2
uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
da0 at ciss0 bus 0 scbus0 target 0 lun 0
da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 135.168MB/s transfers
da0: Command Queueing enabled
da0: 953837MB (1953459632 512 byte sectors)
da1 at ciss0 bus 0 scbus0 target 1 lun 0
da1: <HP RAID ADG OK> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 135.168MB/s transfers
da1: Command Queueing enabled
da1: 9538375MB (19534592432 512 byte sectors)
SMP: AP CPU #1 Launched!
SMP: AP CPU #27 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #26 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #31 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #23 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #21 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #22 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #30 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #25 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #20 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #24 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #18 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #29 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #16 Launched!
SMP: AP CPU #28 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #19 Launched!
SMP: AP CPU #17 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC-low" frequency 1296778534 Hz quality 1000
Root mount waiting for: usbus2 usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
Root mount waiting for: usbus2 usbus0
usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
ugen2.3: <vendor 0x0424 product 0x2660> at usbus2
uhub5: <vendor 0x0424 product 0x2660, class 9/0, rev 2.00/8.01, addr 3> on usbus2
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
uhub5: 2 ports with 1 removable, self powered
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
ugen0.3: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Trying to mount root from ufs:/dev/da0p2 [rw]...
lagg0: link state changed to DOWN
igb1: link state changed to UP
lagg0: link state changed to UP
igb2: link state changed to UP
ums0: <Virtual Mouse> on usbus1
igb3: link state changed to UP
igb0: link state changed to UP