Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-24 14:05:30
From: jandrese
Description: Server with AMD FX-6300
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p11 #0: Thu Jun 21 03:46:08 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: AMD FX(tm)-6300 Six-Core Processor (3511.80-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC>
Structured Extended Features=0x8<BMI1>
SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8154451968 (7776 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
random: unblocking device.
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170303/tbfadt-796)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1755899387 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f5ec40, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 24 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <NVIDIA (0x0be3) HDA Controller> mem 0xfe080000-0xfe083fff irq 25 at device 0.1 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 54 at device 10.0 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe500000-0xfe500fff irq 47 at device 0.0 on pci3
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib4: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe60b000-0xfe60b3ff irq 19 at device 17.0 on pci0
ahci0: AHCI v1.20 with 5 6Gbps ports, Port Multiplier supported
ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe60a000-0xfe60afff irq 18 at device 18.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe609000-0xfe6090ff irq 17 at device 18.2 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe608000-0xfe608fff irq 20 at device 19.0 on pci0
usbus2 on ohci1
usbus2: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe607000-0xfe6070ff irq 21 at device 19.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci1
usbus3: 480Mbps High Speed USB v2.0
hdac1: <ATI SB600 HDA Controller> mem 0xfe600000-0xfe603fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci0: <Promise PDC20375 SATA150 controller> port 0xc080-0xc0bf,0xc0c0-0xc0cf,0xc000-0xc07f mem 0xfe424000-0xfe424fff,0xfe400000-0xfe41ffff irq 20 at device 5.0 on pci6
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe606000-0xfe606fff irq 18 at device 20.5 on pci0
usbus4 on ohci2
usbus4: 12Mbps Full Speed USB v1.0
pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci7: <ACPI PCI bus> on pcib7
ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xb050-0xb057,0xb040-0xb043,0xb030-0xb037,0xb020-0xb023,0xb000-0xb01f mem 0xfe300000-0xfe3001ff irq 20 at device 0.0 on pci7
ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahci1: quirks=0xc00000<NOCCS,NOAUX>
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci8: <ACPI PCI bus> on pcib8
xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe200000-0xfe207fff irq 21 at device 0.0 on pci8
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus5 on xhci0
usbus5: 5.0Gbps Super Speed USB v3.0
pcib9: <ACPI PCI-PCI bridge> at device 21.2 on pci0
pci9: <ACPI PCI bus> on pcib9
xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe100000-0xfe107fff irq 22 at device 0.0 on pci9
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus6 on xhci1
usbus6: 5.0Gbps Super Speed USB v3.0
pcib10: <ACPI PCI-PCI bridge> at device 21.3 on pci0
pci10: <ACPI PCI bus> on pcib10
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xa000-0xa0ff mem 0xd2104000-0xd2104fff,0xd2100000-0xd2103fff irq 23 at device 0.0 on pci10
re1: Using 1 MSI-X message
re1: Chip rev. 0x48000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe605000-0xfe605fff irq 22 at device 22.0 on pci0
usbus7 on ohci3
usbus7: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe604000-0xfe6040ff irq 23 at device 22.2 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci2
usbus8: 480Mbps High Speed USB v2.0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
hdacc0: <NVIDIA GT21x HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <NVIDIA GT21x HDA CODEC> at cad 1 on hdac0
hdaa1: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc1
pcm1: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa1
hdacc2: <NVIDIA GT21x HDA CODEC> at cad 2 on hdac0
hdaa2: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc2
pcm2: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa2
hdacc3: <NVIDIA GT21x HDA CODEC> at cad 3 on hdac0
hdaa3: <NVIDIA GT21x Audio Function Group> at nid 1 on hdacc3
pcm3: <NVIDIA GT21x (HDMI/DP 8ch)> at nid 5 on hdaa3
hdacc4: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa4: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc4
pcm4: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa4
pcm5: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa4
pcm6: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa4
pcm7: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa4
ugen8.1: <ATI EHCI root HUB> at usbus8
ugen5.1: <0x1b21 XHCI root HUB> at usbus5
ugen2.1: <ATI OHCI root HUB> at usbus2
ugen1.1: <ATI EHCI root HUB> at usbus1
ugen7.1: <ATI OHCI root HUB> at usbus7
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ugen4.1: <ATI OHCI root HUB> at usbus4
ugen6.1: <0x1b21 XHCI root HUB> at usbus6
ugen3.1: <ATI EHCI root HUB> at usbus3
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub8: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6
uhub6: 2 ports with 2 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub8: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 EVO 250GB EMT01B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 238475MB (488397168 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: uhub4: <HGST HDN724030ALE640 MJ8OA5E0> ATA8-ACS SATA 3.x device
5 ports with 5 removable, self powered
ada1: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 2861588MB (5860533168 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <HGST HDN724040ALE640 MJAOA5E0> ATA8-ACS SATA 3.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: uhub7: <HGST HDN724040ALE640 MJAOA5E0> ATA8-ACS SATA 3.x device
5 ports with 5 removable, self powered
ada3: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 3815447MB (7814037168 512 byte sectors)
ada4 at ata4 bus 0 scbus7 target 0 lun 0
ada4: <WDC WD800JB-00JJA0 05.01C05> ATA-6 device
ada4: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada4: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada4: 76319MB (156301488 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw,acls]...
GEOM_STRIPE: Device backup0 created (id=4064030560).
GEOM_STRIPE: Disk ada2 attached to backup0.
GEOM_STRIPE: Disk ada3 attached to backup0.
GEOM_STRIPE: Device stripe/backup0 activated.
GEOM: ada3: corrupt or invalid GPT detected.
GEOM: ada3: GPT rejected -- may not be recoverable.
GEOM: ada3: corrupt or invalid GPT detected.
GEOM: ada3: GPT rejected -- may not be recoverable.
re0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to DOWN