Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-10-25 00:10:00
From: chuzzwassa
Description: FreeBSD/amd64 on Toshiba Satellite i3 laptop
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-STABLE #0 r331113: Sun Mar 18 19:33:47 AEST 2018
    root@deepthink:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i3 CPU       M 370  @ 2.40GHz (2400.06-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x20655  Family=0x6  Model=0x25  Stepping=5
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT>
  AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  AMD Features2=0x1<LAHF>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 4294967296 (4096 MB)
avail memory = 3883683840 (3703 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <TOSINV TOSINV00>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1200030032 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80f753b0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <TOSINV TOSINV00> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x4050-0x4057 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
agp0: <Intel Ironlake (M) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci0: Boot video device
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xd6405c00-0xd6405fff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac0: <Intel Ibex Peak HDA Controller> mem 0xd6400000-0xd6403fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: failed to allocate initial prefetch window: 0xd0400000-0xd13fffff
pcib1: [GIANT-LOCKED]
pci1: <ACPI PCI bus> on pcib1
alc0: <Atheros AR8152 v1.1 PCIe Fast Ethernet> port 0x3000-0x307f mem 0xd5400000-0xd543ffff irq 16 at device 0.0 on pci1
alc0: 3584 Tx FIFO, 3840 Rx FIFO
alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
alc0: Using defaults for TSO: 65518/35/2048
alc0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 9285> mem 0xd4400000-0xd440ffff irq 17 at device 0.0 on pci2
[ath] AR9285 Main LNA config: LNA2
[ath] AR9285 Alt LNA config: LNA1
[ath] LNA diversity enabled, Diversity enabled
[ath] Enabling diversity for Kite
ath0: [HT] enabling HT modes
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 RX streams; 1 TX streams
ath0: AR9285 mac 192.2 RF5133 phy 14.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pcib3: failed to allocate initial I/O port window: 0x1000-0x1fff
pcib3: [GIANT-LOCKED]
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xd6405800-0xd6405bff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Ibex Peak-M AHCI SATA controller> port 0x4048-0x404f,0x405c-0x405f,0x4040-0x4047,0x4058-0x405b,0x4020-0x403f mem 0xd6405000-0xd64057ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib5: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib5
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
Timecounters tick every 1.000 msec
hdacc0: <Conexant CX20585 HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant CX20585 Audio Function Group> at nid 1 on hdacc0
pcm0: <Conexant CX20585 (Left Analog)> at nid 25 and 27 on hdaa0
pcm1: <Conexant CX20585 (Analog)> at nid 31 and 35 on hdaa0
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: cd0 at ahcich5 bus 0 scbus1 target 0 lun 0
ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
cd0: <Optiarc DVD RW AD-7710H 1.T0> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfersses0:  (<AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
SATA 1.x, <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
UDMA5, ATAPI 12bytes, PIO 8192bytesuhub1: )
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG HM500JJ 2AK10002> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <SAMSUNG HM500JJ 2AK10002> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p2 [rw]...
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0020> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0020> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <Generic USB2.0-CRW> at usbus0
umass0 on uhub2
umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:3:0: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Generic- Multi-Card 1.00> Removable Direct Access SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da0: quirks=0x2<NO_6_BYTE>
ugen1.3: <Logitech Dell Wireless Mouse WM413> at usbus1
alc0: link state changed to DOWN
alc0: link state changed to UP
ums0 on uhub3
ums0: <Logitech Dell Wireless Mouse WM413, class 0/0, rev 2.00/32.00, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=0
uhid0 on uhub3
uhid0: <Logitech Dell Wireless Mouse WM413, class 0/0, rev 2.00/32.00, addr 3> on usbus1