Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-10-25 16:01:40
From: mazhe
Description: HP Z800
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #12: Wed Sep 12 09:53:08 CEST 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/VIMAGE amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (2264.49-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x106a5 Family=0x6 Model=0x1a Stepping=5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
VT-x: PAT,HLT,MTF,PAUSE,EPT,VPID
TSC: P-state invariant, performance statistics
real memory = 19329449984 (18434 MB)
avail memory = 18666622976 (17801 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HPQOEM TYLSBURG>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 1
ioapic1: Changing APIC ID to 2
ioapic2: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
Timecounter "TSC-low" frequency 1132244918 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80fcfce0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-WKS> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Firmware Error (ACPI): Failure creating [\134_SB.PCI0._OSC.CAPD], AE_ALREADY_EXISTS (20171214/dsfield-344)
ACPI Error: Method parse/execution failed \134_SB.PCI0._OSC, AE_ALREADY_EXISTS (20171214/psparse-677)
pcib0: _OSC failed: AE_ALREADY_EXISTS
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xfa000000-0xfaffffff,0xe0000000-0xefffffff,0xf8000000-0xf9ffffff irq 24 at device 0.0 on pci2
vgapci0: Boot video device
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
device_attach: ioapic0 attach returned 6
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xc000-0xc01f irq 20 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xc020-0xc03f irq 21 at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xc040-0xc05f irq 22 at device 26.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfd004800-0xfd004bff irq 22 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801JI HDA Controller> mem 0xfd000000-0xfd003fff irq 21 at device 27.0 on pci0
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pcib5: [GIANT-LOCKED]
pci4: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0x5784100> mem 0xfc000000-0xfc00ffff irq 16 at device 0.0 on pci4
bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <ACPI PCI-PCI bridge> irq 21 at device 28.5 on pci0
pcib6: [GIANT-LOCKED]
pci5: <ACPI PCI bus> on pcib6
bge1: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0x5784100> mem 0xfb000000-0xfb00ffff irq 17 at device 0.0 on pci5
bge1: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xc060-0xc07f irq 20 at device 29.0 on pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xc080-0xc09f irq 21 at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xc0a0-0xc0bf irq 22 at device 29.2 on pci0
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfd004c00-0xfd004fff irq 20 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pci6: <serial bus, FireWire> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8+ (RAID) AHCI SATA controller> port 0xc100-0xc107,0xc110-0xc113,0xc108-0xc10f,0xc114-0xc117,0xc0c0-0xc0df mem 0xfd004000-0xfd0047ff irq 18 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pcib8: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib8: Length mismatch for 5 range: 3e vs 3c
pci7: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 3.0 on pci7
pci8: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 7.0 on pci7
pci9: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 9.0 on pci7
pci10: <ACPI PCI bus> on pcib11
mpt0: <LSILogic SAS/SATA Adapter> port 0xe000-0xe0ff mem 0xde010000-0xde013fff,0xde000000-0xde00ffff irq 56 at device 0.0 on pci10
mpt0: MPI Version=1.5.18.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pci7: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci7: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
device_attach: ioapic0 attach returned 6
pcib12: <ACPI Host-PCI bridge> on acpi0
pci11: <ACPI PCI bus> on pcib12
pcib13: <ACPI Host-PCI bridge> on acpi0
pci12: <ACPI PCI bus> on pcib13
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
orm0: <ISA Option ROM> at iomem 0xe9000-0xeffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est6: <Enhanced SpeedStep Frequency Control> on cpu6
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC262 (Analog)> at nid 21 and 24,25,26 on hdaa0
pcm1: <Realtek ALC262 (Front Analog Headphones)> at nid 27 on hdaa0
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen4.1: <Intel UHCI root HUB> at usbus4
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Trying to mount root from zfs:zroot/ROOT/default []...
da0 at mpt0 bus 0 scbus6 target 0 lun 0
da0: <FUJITSU MBA3300RC HPF1> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 286102MB (585937500 512 byte sectors)
cd0 at ahcich0 bus 0 scbus0 target 0 lun 0
cd0: <HL-DT-ST DVD-RAM GH40L RB02> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da3 at mpt0 bus 0 scbus6 target 3 lun 0
da3: <ATA ST3000DM001-1CH1 CC26> Fixed Direct Access SPC-3 SCSI device
da3: [_SERIAL_NUMBER_XXXXX]
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 2097151MB (4294967294 512 byte sectors)
da3: quirks=0x8<4K>
da2 at mpt0 bus 0 scbus6 target 2 lun 0
da2: <ATA ST3000DM001-1CH1 CC26> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 2097151MB (4294967294 512 byte sectors)
da2: quirks=0x8<4K>
da1 at mpt0 bus 0 scbus6 target 1 lun 0
da1: <ATA ST3000DM001-1CH1 CC26> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 2097151MB (4294967294 512 byte sectors)
da1: quirks=0x8<4K>
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
random: unblocking device.
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub0: 6 ports with 6 removable, self powered
ugen6.2: <Dell Dell USB Keyboard> at usbus6
ukbd0 on uhub4
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 2> on usbus6
kbd2 at ukbd0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
Cuse v0.1.35 @ /dev/cuse
fuse-freebsd: version 0.4.4, FUSE ABI 7.8
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
nvidia0: <Quadro FX 1800> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge0: link state changed to DOWN
bge0: link state changed to UP