Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-10-26 16:10:20
From: yamori813
Description: amd64
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) 64 Processor 3000+ (2002.60-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0xf48 Family=0xf Model=0x4 Stepping=8
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow!+,3DNow!>
real memory = 1072889856 (1023 MB)
avail memory = 994447360 (948 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <A M I OEMAPIC >
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
Timecounter "TSC" frequency 2002602964 Hz quality 800
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8385 host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xe8000000-0xefffffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
pci0: <serial bus, FireWire> at device 7.0 (no driver attached)
atapci0: <Promise PDC20378 SATA150 controller> port 0xe800-0xe83f,0xe400-0xe40f,0xe000-0xe07f mem 0xfdf00000-0xfdf00fff,0xfde00000-0xfde1ffff irq 18 at device 8.0 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ata4: <ATA channel> at channel 2 on atapci0
pcm0: <ESS Technology Maestro3> port 0xd400-0xd4ff mem 0xfdc00000-0xfdc01fff irq 16 at device 9.0 on pci0
pcm0: <Wolfson WM9703/4/7/8 AC97 Codec>
skc0: <3Com 3C940 Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfda00000-0xfda03fff irq 17 at device 10.0 on pci0
skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
cbb0: <RF5C475 PCI-CardBus Bridge> at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
bge0: <Altima Gigabit Ethernet Controller, ASIC rev. 0x000105> mem 0xfdb00000-0xfdb0ffff irq 18 at device 13.0 on pci0
bge0: CHIP ID 0x00000105; ASIC REV 0x00; CHIP REV 0x01; PCI on PCI-X 33 MHz; 32bit
miibus1: <MII bus> on bge0
brgphy0: <BCM5701 1000BASE-T media interface> PHY 1 on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
pci0: <multimedia, video> at device 14.0 (no driver attached)
pci0: <multimedia> at device 14.1 (no driver attached)
atapci1: <VIA 6420 SATA150 controller> port 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f,0xb000-0xb0ff irq 20 at device 15.0 on pci0
ata5: <ATA channel> at channel 0 on atapci1
ata6: <ATA channel> at channel 1 on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel> at channel 0 on atapci2
ata1: <ATA channel> at channel 1 on atapci2
uhci0: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 21 at device 16.0 on pci0
uhci0: LegSup = 0xa000
usbus0 on uhci0
uhci1: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device 16.1 on pci0
uhci1: LegSup = 0xa000
usbus1 on uhci1
uhci2: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device 16.2 on pci0
uhci2: LegSup = 0xa000
usbus2 on uhci2
uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 21 at device 16.3 on pci0
uhci3: LegSup = 0xa000
usbus3 on uhci3
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfd400000-0xfd4000ff irq 21 at device 16.4 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
powernow0: <Cool`n'Quiet K8> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen0.1: <VIA UHCI root HUB> at usbus0
uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <VIA UHCI root HUB> at usbus1
uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <VIA UHCI root HUB> at usbus2
uhub2: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <VIA UHCI root HUB> at usbus3
uhub3: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
ugen4.1: <VIA EHCI root HUB> at usbus4
uhub4: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub3: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
ath0: <Atheros 5416> mem 0x88000000-0x8800ffff irq 17 at device 0.0 on cardbus0
ath0: [HT] enabling HT modes
ath0: [HT] RTS aggregates limited to 8 KiB
ath0: [HT] 2 RX streams; 2 TX streams
ath0: AR5416 mac 13.10 RF5133 phy 8.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD2500AAKX-193CA0 15.01H15> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors)
ada1 at ata0 bus 0 scbus5 target 0 lun 0
ada1: <Maxtor 6L250R0 BAJ41G20> ATA-7 device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 133.000MB/s transfers (UDMA6, PIO 8192bytes)
ada1: 238475MB (488397168 512 byte sectors)
Trying to mount root from ufs:/dev/ada1a [rw]...
cd0 at ata1 bus 0 scbus6 target 0 lun 0
cd0: < 16X10X32 CD-RW 1.03> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub4: 8 ports with 8 removable, self powered
warning: total configured swap (1018669 pages) exceeds maximum recommended amount (986232 pages).
warning: increase kern.maxswzone or reduce amount of swap.
random: unblocking device.
sk0: link state changed to DOWN
sk0: link state changed to UP