Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-11-05 14:31:23
From: coypu
Description: rpi3 with usb wifi, arm64.img
[ 1.000000] ksyms: checking .text [ 1.000000] ksyms: checking .rodata [ 1.000000] ksyms: checking link_set_evcnts [ 1.000000] ksyms: checking .eh_frame [ 1.000000] ksyms: checking link_set_arm_platforms [ 1.000000] ksyms: checking link_set_sysctl_funcs [ 1.000000] ksyms: checking link_set_fdt_consoles [ 1.000000] ksyms: checking link_set_modules [ 1.000000] ksyms: checking link_set_ieee80211_funcs [ 1.000000] ksyms: checking link_set_domains [ 1.000000] ksyms: checking link_set_sdt_argtypes_set [ 1.000000] ksyms: checking link_set_sdt_probes_set [ 1.000000] ksyms: checking link_set_sdt_providers_set [ 1.000000] ksyms: checking link_set_dkwedge_methods [ 1.000000] ksyms: checking link_set_prop_linkpools [ 1.000000] ksyms: checking .data [ 1.000000] ksyms: checking .data.cacheline_aligned [ 1.000000] ksyms: checking .data.read_mostly [ 1.000000] ksyms: checking .bss [ 1.000000] ksyms: checking .ident [ 1.000000] ksyms: checking .comment [ 1.000000] ksyms: checking .note.netbsd.ident [ 1.000000] ksyms: checking .debug_info [ 1.000000] ksyms: checking .debug_abbrev [ 1.000000] ksyms: checking .debug_loc [ 1.000000] ksyms: checking .debug_aranges [ 1.000000] ksyms: checking .debug_line [ 1.000000] ksyms: checking .debug_str [ 1.000000] ksyms: checking .shstrtab [ 1.000000] ksyms: checking .symtab [ 1.000000] ksyms: checking .strtab [ 1.000000] Loaded initial symtab at 0xffffffc000864468, strtab at 0xffffffc000901b90, # entries 26871 [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 8.99.25 (GENERIC64) #0: Wed Oct 17 23:36:58 UTC 2018 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64 [ 1.000000] total memory = 937 MB [ 1.000000] avail memory = 907 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Raspberry Pi 3 Model B Rev 1.2 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] simplebus3 at simplebus1 [ 1.000000] cpus0 at simplebus0 [ 1.000000] cpu0 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu0: package 0, core 0, smt 0 [ 1.000000] cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.000000] cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.000000] cpu0: Dcache line 64, Icache line 64 [ 1.000000] cpu0: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.000000] cpu0: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.000000] cpu0: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.000000] cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.000000] cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.000000] cpu1 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu1: package 0, core 1, smt 0 [ 1.000000] cpu2 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu2: package 0, core 2, smt 0 [ 1.000000] cpu3 at cpus0: Cortex-A53 r0p4 (Cortex V8-A core) [ 1.000000] cpu3: package 0, core 3, smt 0 [ 1.000000] simplebus4 at simplebus0 [ 1.000000] bcmicu0 at simplebus1 [ 1.000000] bcmicu1 at simplebus1: Multiprocessor [ 1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc) [ 1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller [ 1.000000] bcmaux0 at simplebus1 [ 1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) [ 1.000000] gtmr0 at simplebus0: Generic Timer [ 1.000000] gtmr0: interrupting on local_intc irq 3 [ 1.000000] armgtmr0 at gtmr0: ARM Generic Timer (19200 kHz) [ 1.000000] timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500 [ 1.000003] plcom0 at simplebus1 [ 1.000003] plcom0: txfifo disabled [ 1.000003] plcom0: interrupting on icu irq 185 [ 1.000003] com0 at simplebus1: BCM AUX UART, working fifo [ 1.000003] com0: console [ 1.000003] com0: interrupting on icu irq 157 [ 1.000003] /soc/thermal@7e212000 at simplebus1 not configured [ 1.000003] /soc/dsi@7e209000 at simplebus1 not configured [ 1.000003] bcmgpio0 at simplebus1: GPIO controller [ 1.000003] bcmgpio0: pins 0..31 interrupting on icu irq 177 [ 1.000003] bcmgpio0: pins 32..54 interrupting on icu irq 178 [ 1.000003] gpio0 at bcmgpio0: 54 pins [ 1.000003] /soc/firmware/gpio at simplebus3 not configured [ 1.000003] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10 [ 1.000003] /soc/power at simplebus1 not configured [ 1.000003] mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs [ 1.000003] bsciic0 at simplebus1: Broadcom Serial Controller [ 1.000003] iic0 at bsciic0: I2C bus [ 1.000003] /phy at simplebus0 not configured [ 1.000003] bcmmbox0 at simplebus1: VC mailbox [ 1.000003] bcmmbox0: interrupting on icu irq 193 [ 1.000003] vcmbox0 at bcmmbox0 [ 1.000003] sdhost0 at simplebus1: SD HOST controller [ 1.000003] sdhost0: interrupting on icu irq 184 [ 1.000003] bsciic1 at simplebus1: Broadcom Serial Controller [ 1.000003] iic1 at bsciic1: I2C bus [ 1.000003] /soc/pwm@7e20c000 at simplebus1 not configured [ 1.000003] sdhc0 at simplebus1: SDHC controller [ 1.000003] sdhc0: interrupting on icu irq 190 [ 1.000003] bsciic2 at simplebus1: Broadcom Serial Controller [ 1.000003] iic2 at bsciic2: I2C bus [ 1.000003] /soc/vec@7e806000 at simplebus1 not configured [ 1.000003] /soc/hdmi@7e902000 at simplebus1 not configured [ 1.000003] dwctwo0 at simplebus1: USB controller [ 1.000003] dwctwo0: interrupting on icu irq 137 [ 1.000003] /soc/gpu at simplebus1 not configured [ 1.000003] genfb0 at simplebus1Vendor: [MEI] Panasonic [ 1.000003] Product: [A09B] Panasonic-TV [ 1.000003] Serial number: 01010101 [ 1.000003] Manufactured 2010 Week 0 [ 1.000003] EDID Version 1.3 [ 1.000003] EDID Comment: [ 1.000003] Video Input: 80 [ 1.000003] Digital [ 1.000003] Gamma: 2.20 [ 1.000003] Max Size: 0 cm x 0 cm [ 1.000003] Features: a [ 1.000003] RGB [ 1.000003] Preferred timing [ 1.000003] Chroma Info: [ 1.000003] Red X: 0.639 [ 1.000003] Red Y: 0.639 [ 1.000003] Grn X: 0.291 [ 1.000003] Grn Y: 0.634 [ 1.000003] Blu X: 0.163 [ 1.000003] Blu Y: 0.092 [ 1.000003] Wht X: 0.288 [ 1.000003] Wht Y: 0.295 [ 1.000003] Range: [ 1.000003] Horizontal: 15 - 68 kHz [ 1.000003] Vertical: 23 - 61 Hz [ 1.000003] Max Dot Clock: 150 MHz [ 1.000003] Video modes: [ 1.000003] 1280x720 @ 50Hz (74250 1720 1760 1980 725 730 750 +H +V) [ 1.000003] 1280x720 @ 60Hz (74250 1390 1430 1650 725 730 750 +H +V) [ 1.000003] Preferred mode: 1280x720 @ 50Hz [ 1.000003] Number of extension blocks: 1 [ 1.000003] rpi_fb_init: addr = 0xfe876000 size = 3686400 [ 1.000003] rpi_fb_init: depth = 32 [ 1.000003] rpi_fb_init: pitch = 5120 [ 1.000003] rpi_fb_init: width = 1280 height = 720 [ 1.000003] rpi_fb_init: vwidth = 1280 vheight = 720 [ 1.000003] : switching to framebuffer console [ 1.000003] genfb0: framebuffer at 0xfe876000, size 1280x720, depth 32, stride 5120 [ 1.000003] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [ 1.000003] wsmux1: connecting to wsdisplay0 [ 1.000003] wsdisplay0: screen 1-3 added (default, vt100 emulation) [ 1.000003] /soc/vchiq at simplebus1 not configured [ 1.000003] gpioleds0 at simplebus0: [ 1.000003] /soc/timer@7e003000 at simplebus1 not configured [ 1.000003] watchdog0 at simplebus1: Power management, Reset and Watchdog controller [ 1.000003] bcmrng0 at simplebus1: RNG [ 1.000003] /soc/mailbox@7e00b840 at simplebus1 not configured [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.000003] cpu_boot_secondary_processors: writing mbox with 0xe [ 1.000003] cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.813250] cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.823233] cpu3: Dcache line 64, Icache line 64 [ 1.833235] cpu3: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.843235] cpu3: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.853237] cpu3: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.873240] cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.883239] cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.893242] cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 1.903242] cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 1.913244] cpu2: Dcache line 64, Icache line 64 [ 1.923244] cpu2: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 1.943246] cpu2: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 1.953248] cpu2: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 1.963248] cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 1.973250] cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 1.993252] cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled [ 2.003252] cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B [ 2.013254] cpu1: Dcache line 64, Icache line 64 [ 2.023254] cpu1: L1 32KB/64B 2-way read-allocate VIPT Instruction cache [ 2.043256] cpu1: L1 32KB/64B 4-way write-back read-allocate write-allocate PIPT Data cache [ 2.053258] cpu1: L2 512KB/64B 16-way write-back read-allocate write-allocate PIPT Unified cache [ 2.073260] cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID [ 2.083260] cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add [ 2.103262] cpu_boot_secondary_processors: secondary processors hatched [ 2.153269] sdmmc0 at sdhost0 [ 2.169606] sdhc0: SDHC 3.0, rev 153, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 2.186246] sdmmc1 at sdhc0 slot 0 [ 2.196736] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 2.196736] usb0 at dwctwo0: USB revision 2.0 [ 2.316749] uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.326752] uhub0: 1 port with 1 removable, self powered [ 2.346754] sdhc0: cmd timeout error [ 2.516771] sdmmc0: SD card status: 4-bit, C10 [ 2.527700] ld0 at sdmmc0: <0x03:0x5344:SL16G:0x80:0x43964b49:0x114> [ 2.536775] ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors [ 2.546776] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.556777] IPsec: Initialized Security Association Processing. [ 2.636785] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 1 not configured [ 2.647480] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured [ 4.166969] uhub1 at uhub0 port 1: vendor 0424 (0x424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2 [ 4.176970] uhub1: multiple transaction translators [ 4.196973] uhub1: 5 ports with 4 removable, self powered [ 5.497106] usmsc0 at uhub1 port 1 [ 5.507108] usmsc0: vendor 0424 (0x424) product ec00 (0xec00), rev 2.00/2.00, addr 3 [ 5.517109] usmsc0: Ethernet address [_MAC_XXXXXXXXXX] [ 5.527111] ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3 [ 5.537112] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 6.537245] bwfm0 at uhub1 port 2: Broadcom (0xa5c) Remote Download Wireless Adapter (0xbd1e), rev 2.00/0.01, addr 4 [ 7.807414] uhidev0 at uhub1 port 4 configuration 1 interface 0 [ 7.807414] uhidev0: KINESIS FREESTYLE KB800 (0x58f) KB800 Kinesis Freestyle (0x9410), rev 1.10/1.22, addr 5, iclass 3/1 [ 7.897426] ukbd0 at uhidev0: 8 Variable keys, 6 Array codes [ 8.297479] wskbd0 at ukbd0: console keyboard, using wsdisplay0 [ 8.317483] uhidev1 at uhub1 port 4 configuration 1 interface 1 [ 8.317483] uhidev1: KINESIS FREESTYLE KB800 (0x58f) KB800 Kinesis Freestyle (0x9410), rev 1.10/1.22, addr 5, iclass 3/0 [ 8.387492] uhidev1: 3 report ids [ 8.387492] uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 [ 8.387492] uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0 [ 8.397493] uhub0: autoconfiguration error: illegal enable change, port 1 [ 8.407495] WARNING: 3 errors while detecting hardware; check system log. [ 8.417497] boot device: ld0 [ 8.427498] root on ld0a dumps on ld0b [ 8.427498] mountroot: trying ext2fs... [ 8.447500] mountroot: trying ffs... [ 8.447500] root file system type: ffs [ 8.457501] kern.module.path=/stand/evbarm/8.99.25/modules [ 8.457501] WARNING: no TOD clock present [ 8.467503] WARNING: using filesystem time [ 8.473106] WARNING: CHECK AND RESET THE DATE! [ 8.777544] bwfm0: firmware loaded [ 8.787545] bwfm0: wl0: Apr 3 2014 04:43:32 version[_IP_XXXXXX] (r467479) FWID 01-32bd010e [ 8.807549] bwfm0: address [_MAC_XXXXXXXXXX] [ 8.807549] bwfm0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 8.817949] bwfm0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 8.837908] init: copying out path `/sbin/init' 11 [ 28.870515] usmsc0: link state DOWN (was UNKNOWN) [ 30.220745] wsdisplay0: screen 4 added (default, vt100 emulation) [ 122.957782] bwfm0: link state UP (was UNKNOWN) [ 193.407528] ukbd0: was console keyboard [ 193.407528] wskbd0: detached [ 193.407528] ukbd0: detached [ 193.417532] uhidev0: detached [ 193.417532] uhidev0: at uhub1 port 4 (addr 5) disconnected [ 193.417532] uhid0: detached [ 193.427544] uhid1: detached [ 193.427544] uhidev1: detached [ 193.427544] uhidev1: at uhub1 port 4 (addr 5) disconnected