Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-11-08 06:59:31
From: yamori813
Description: FreeBSD 12.0-BETA3 e34c2dbbe3f(stable/12) Buffalo_WZR-HP-G301NH mip
---<<BOOT>>--- KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-BETA3 e34c2dbbe3f(stable/12) Buffalo_WZR-HP-G301NH mips gcc version 4.2.1 20070831 patched [FreeBSD] Preloaded elf kernel "kernel" at 0x8047b200. real memory = 67108864 (65536K bytes) Physical memory chunk(s): 0x0050d000 - 0x03ef5fff, 60723200 bytes (14825 pages) avail memory = 59908096 (57MB) arc4random: no preloaded entropy cache random: entropy device external interface wlan: <802.11 Link Layer> mem: <memory> null: <full device, null device, zero device> [ath_hal] loaded nexus0: <MIPS32 root nexus> clock0: <Generic MIPS32 ticker> on nexus0 Timecounter "MIPS32" frequency 200000000 Hz quality 800 Event timer "MIPS32" frequency 200000000 Hz quality 800 apb0 at irq 4 on nexus0 uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0 uart0: console (115200,n,8,1) uart0: fast interrupt uart0: PPS capture mode: DCD gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0 gpio0: [GIANT-LOCKED] gpio0: function_set: 0x2000 gpio0: function_clear: 0x0 gpio0: gpio pinmask=0x1e5040 gpiobus0: <GPIO bus> on gpio0 gpioiic0: <GPIO I2C bit-banging driver> at pins 19-20 on gpiobus0 gpioiic0: SCL pin: 20, SDA pin: 19 iicbb0: <I2C bit-banging driver> on gpioiic0 iicbus0: <Philips I2C bus> on iicbb0 master-only rtl8366rb0: <RTL8366RB Ethernet Switch Controller> at addr 0xa8 on iicbus0 rtl8366rb0: rev. 3 miibus0: <MII bus> on rtl8366rb0 ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0 ukphy0: OUI 0x00e04c, model 0x0016, rev. 1 ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus1: <MII bus> on rtl8366rb0 ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1 ukphy1: OUI 0x00e04c, model 0x0016, rev. 1 ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus2: <MII bus> on rtl8366rb0 ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2 ukphy2: OUI 0x00e04c, model 0x0016, rev. 1 ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto miibus3: <MII bus> on rtl8366rb0 ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3 ukphy3: OUI 0x00e04c, model 0x0016, rev. 1 ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto mdio0: <MDIO> on rtl8366rb0 mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0 etherswitch0: <Switch controller> on rtl8366rb0 iic0: <I2C generic I/O> on iicbus0 gpioled0: <GPIO led> at pin 6 on gpiobus0 gpioled1: <GPIO led> at pin 17 on gpiobus0 gpioled2: <GPIO led> at pin 18 on gpiobus0 gpiobus0: <unknown device> at pin 12 gpiobus0: <unknown device> at pin 13 gpioc0: <GPIO controller> on gpio0 arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0 arge0: arge_fetch_pll_config: pll_1000 = 0x1f000000 arge0: arge_attach: overriding MII mode to 'RGMII' arge0: Generating random ethernet address. mii_attach_proxy: not attaching, no mdio device hint for arge0 arge0: finishing attachment, phymask 0000, proxy null arge0: bpf attached arge0: Ethernet address: [_MAC_XXXXXXXXXX] arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0 arge1: Overriding MAC from EEPROM arge1: arge_fetch_pll_config: pll_1000 = 0x100 arge1: arge_attach: overriding MII mode to 'RGMII' miiproxy0: <MII/MDIO proxy, MII side> on arge1 miiproxy0: attached to target mdio0 arge1: finishing attachment, phymask 0010, proxy set miibus4: <MII bus> on miiproxy0 ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4 ukphy4: OUI 0x00e04c, model 0x0016, rev. 1 ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto arge1: bpf attached arge1: Ethernet address: [_MAC_XXXXXXXXXX] spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0 spibus0: <SPI bus> on spi0 ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0 usbus0: EHCI version 1.0 usbus0 on ehci0 ehci0: usbpf: Attached cfi0 at mem 0xbe000000-0xbfffffff on nexus0 cfi0: [256x128KB] cfid0 on cfi0 ath0: Vendor=0x168c, Device=0x000b ath0: Vendor=0x168c, Device=0x000b ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0 ath0: unable to attach hardware; HAL status 8 Unimplemented nexus_teardown_intr at /usr/home/hiroki/freebsd/sys/mips/mips/nexus.c:511 device_attach: ath0 attach returned 6 ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0 ar71xx_wdog0: Previous reset was due to watchdog timeout Device configuration finished. Timecounters tick every 1.000 msec vlan: initialized, using hash tables with chaining lo0: bpf attached tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024 rtl8366rb0port0: link state changed to DOWN rtl8366rb0port1: link state changed to DOWN rtl8366rb0port2: link state changed to DOWN rtl8366rb0port3: link state changed to DOWN GEOM: new disk cfid0 usbus0: 480Mbps High Speed USB v2.0 MAP: cfid0: 0x40000, data=0x40000 "/dev/map/uboot" MAP: cfid0: 40000x20000, data=0x20000 "/dev/map/uboot_environ" MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000 ugen0.1: <Atheros EHCI root HUB> at usbus0 uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 MAP: cfid0: 60000x150000, data=0x150000 "/dev/map/kernel" MAP: search cfid0 for key ".!/bin/sh" from 0x100000, step 0x10000 MAP: cfid0: 1b0000x1e10000, data=0x1e10000 "/dev/map/rootfs" MAP: cfid0: 1fc0000x20000, data=0x20000 "/dev/map/config" MAP: cfid0: 1fe0000x20000, data=0x20000 "/dev/map/ART" MAP: cfid0: 60000x1f60000, data=0x1f60000 "/dev/map/upgrade" MAP: No valid partition found at map/rootfs.uzip Trying to mount root from cd9660:/dev/map/rootfs.uzip []... cd9660: RockRidge Extension Warning: no time-of-day clock registered, system time will not be set accurately start_init: trying /sbin/init uhub0: 1 port with 1 removable, self powered rtl8366rb0port1: link state changed to UP rtl8366rb0port3: link state changed to UP rtl8366rb0port2: link state changed to UP MAP: No valid partition found at md0 random: unblocking device. MAP: No valid partition found at md0 lo0: link state changed to UP /tmp: optimization changed from SPACE to TIME arge1: link state changed to UP ipfw2 initialized, divert loadable, nat loadable, default to accept, logging disabled