Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-11-13 21:56:19
From: yamori813
Description: FreeBSD 12.0-BETA4 Buffalo_WHR-300HP2N mips
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-BETA4 #0 e78279655eb(stable/12)-dirty: Wed Nov 14 06:46:29 JST 2018
    hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hi
roki/freebsd/mips.mipsel/sys/Buffalo_WHR-300HP2N mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x803910b0.
real memory  = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00429000 - 0x03ef1fff, 61640704 bytes (15049 pages)
avail memory = 60833792 (58MB)
arc4random: no preloaded entropy cache
ULE: setup cpu 0
firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0x8032a520
firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x8032c5a0
random: entropy device external interface
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0x8032e620
wlan: <802.11 Link Layer>
firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0x803284a0
openfirm: <Open Firmware control device>
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
ofwbus0: <Open Firmware Device Tree> on nexus0
palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
sysc0: <MTK System Controller> mem 0-0xff on palmbus0
pinctrl0: <MTK Pin Controller> on ofwbus0
pinctrl0: GPIO mode start: 0x001a311c
Processing 1 pin-config node(s) in pinctrl-0 for spi@b00
Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00
Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
Processing 1 pin-config node(s) in pinctrl-0 for ethernet@10100000
pinctrl0: GPIO mode end  : 0x000a371d
rstctrl0: <MTK Reset Controller> on ofwbus0
clkctrl0: <MTK Clock Controller> on ofwbus0
intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 9 on palmbus0
gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 12 on palmbus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <MTK GPIO Controller (v1)> mem 0x660-0x683 irq 14 on palmbus0
gpiobus1: <OFW GPIO bus> on gpio1
cpulist0: <Open Firmware CPU Group> on ofwbus0
palmbus0: <timer@100> mem 0x100-0x11f irq 7 compat ralink,mt7620a-timer (no driv
er attached)
palmbus0: <watchdog@120> mem 0x120-0x12f irq 8 compat ralink,mt7620a-wdt (no dri
ver attached)
palmbus0: <memc@300> mem 0x300-0x3ff irq 10 compat ralink,mt7620a-memc (no drive
r attached)
palmbus0: <uart@500> mem 0x500-0x5ff irq 11 disabled compat ralink,mt7620a-uart 
(no driver attached)
gpioc0: <GPIO controller> on gpio0
palmbus0: <gpio@638> mem 0x638-0x65b irq 13 disabled compat ralink,mt7620a-gpio 
(no driver attached)
gpioc1: <GPIO controller> on gpio1
palmbus0: <gpio@688> mem 0x688-0x6ab irq 15 disabled compat ralink,mt7620a-gpio 
(no driver attached)
palmbus0: <i2c@900> mem 0x900-0x9ff disabled compat link,mt7620a-i2c (no driver 
attached)
palmbus0: <i2s@a00> mem 0xa00-0xaff irq 16 disabled compat ralink,mt7620a-i2s (n
o driver attached)
spi0: <MTK SPI Controller (v1)> mem 0xb00-0xb3f on palmbus0
spibus0: <OFW SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type s25fl064, size 8192K in 128 sectors of 64K, erase size 64K
palmbus0: <spi@b40> mem 0xb40-0xb9f disabled compat ralink,rt2880-spi (no driver
 attached)
uart0: <MTK UART Controller> mem 0xc00-0xcff irq 17 on palmbus0
uart0: console (58139,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
palmbus0: <systick@d00> mem 0xd00-0xd0f irq 18 compat ralink,mt7620a-systick (no
 driver attached)
palmbus0: <pcm@2000> mem 0x2000-0x27ff irq 19 disabled compat ralink,mt7620a-pcm
 (no driver attached)
palmbus0: <gdma@2800> mem 0x2800-0x2fff irq 20 disabled compat ralink,mt7620a-gd
ma (no driver attached)
ofwbus0: <usbphy> compat mediatek,mt7620-usbphy (no driver attached)
rt0: <Ralink MT7620 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq 0 on o
fwbus0
rt0: MT7620 Ethernet MAC (rev 0x00000000)
rt0: use hardcoded [_MAC_XXXXXXXXXX] macaddr
rt0: bpf attached
rt0: Ethernet address: [_MAC_XXXXXXXXXX]
mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1 on ofwbus0
miibus0: <MII bus> on mtkswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x0017a5, model 0x0000, rev. 13
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus1: <MII bus> on mtkswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x0017a5, model 0x0000, rev. 13
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus2: <MII bus> on mtkswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x0017a5, model 0x0000, rev. 13
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus3: <MII bus> on mtkswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x0017a5, model 0x0000, rev. 13
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus4: <MII bus> on mtkswitch0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x0017a5, model 0x0000, rev. 13
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
etherswitch0: <Switch controller> on mtkswitch0
mdio0: <MDIO> on mtkswitch0
ofwbus0: <sdhci@10130000> mem 0x10130000-0x10133fff irq 2 disabled compat ralink
,mt7620-sdhci (no driver attached)
ofwbus0: <ehci@101c0000> mem 0x101c0000-0x101c0fff irq 3 disabled compat generic
-ehci (no driver attached)
ofwbus0: <ohci@101c1000> mem 0x101c1000-0x101c1fff irq 4 disabled compat generic
-ohci (no driver attached)
ofwbus0: <pcie@10140000> mem 0x10140000-0x1014ffff irq 5 disabled type pci compa
t mediatek,mt7620-pci (no driver attached)
ofwbus0: <wmac@10180000> mem 0x10180000-0x101bffff irq 6 compat ralink,rt7620-wm
ac (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
ofwbus0: <gpio-keys-polled> compat gpio-keys-polled (no driver attached)
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 290000000 Hz quality 800
Event timer "MIPS32" frequency 290000000 Hz quality 800
Device configuration finished.
Timecounters tick every 10.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
mtkswitch0port0: link state changed to DOWN
mtkswitch0port1: link state changed to DOWN
mtkswitch0port2: link state changed to DOWN
mtkswitch0port3: link state changed to DOWN
mtkswitch0port4: link state changed to DOWN
GEOM: new disk flash/spi0
Trying to mount root from cd9660:/dev/flash/spi0s.rootfs.uzip []...
MAP: No valid partition found at flash/spi0
flash/spi0: slice 00000000-0002ffff: Bootloader (191KB)
flash/spi0: slice 00030000-0003ffff: Config (63KB)
flash/spi0: slice 00040000-0004ffff: Factory (63KB)
flash/spi0: slice 00050000-0015ffff: firmware (1087KB)
flash/spi0: slice 00160000-007fffff: rootfs (6783KB)
flash/spi0: slice 00050000-007fffff: upgrade (7871KB)
MAP: No valid partition found at flash/spi0s.Bootloader
MAP: No valid partition found at flash/spi0s.Config
MAP: No valid partition found at flash/spi0s.Factory
MAP: No valid partition found at flash/spi0s.firmware
MAP: No valid partition found at flash/spi0s.rootfs
MAP: No valid partition found at flash/spi0s.upgrade
MAP: No valid partition found at flash/spi0s.rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
mtkswitch0port3: link state changed to UP
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME