Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-11-17 17:43:30
From: mzar
Description: Dell 5590 running 12.0-RC1
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RC1 r340470 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz (1896.06-MHz K8-class CPU) Origin="GenuineIntel" Id=0x806ea Family=0x6 Model=0x8e Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0x9c000000<IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16470376448 (15707 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL CBX3 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 on motherboard Launching APs: 1 3 6 4 5 7 2 Timecounter "TSC" frequency 1896062559 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f8690, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard acpi0: <DELL CBX3 > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x930,0x934 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xed000000-0xedffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Sunrise Point-LP USB 3.0 controller> mem 0xef330000-0xef33ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci_interrupt: host controller halted usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms, UART> at device 22.3 (no driver attached) ahci0: <Intel ICH8M+ (RAID) AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xef350000-0xef351fff,0xef354000-0xef3540ff,0xef353000-0xef3537ff irq 16 at device 23.0 on pci0 ahci0: AHCI v1.31 with 1 6Gbps ports, Port Multiplier not supported ahcich2: <AHCI channel> at channel 2 on ahci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <unknown> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci3: <ACPI PCI bus> on pcib3 vgapci1: <VGA-compatible display> port 0xe000-0xe07f mem 0xee000000-0xeeffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 16 at device 0.0 on pci3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Kabylake-LP HDA Controller> mem 0xef348000-0xef34bfff,0xef320000-0xef32ffff irq 17 at device 31.3 on pci0 em0: <Intel(R) PRO/1000 Network Connection> mem 0xef300000-0xef31ffff irq 16 at device 31.6 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Realtek ALC256 HDA CODEC> at cad 0 on hdac0 ada0 at ahcich2 bus 0 scbus0 target 0 lun 0 ada0: <INTENSO SBFM61.2> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 488386MB (1000215216 512 byte sectors) hdaa0: <Realtek ALC256 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC256 (Internal Analog)> at nid 20 and 18 on hdaa0 pcm1: <Realtek ALC256 (Front Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Kabylake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kabylake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Kabylake (HDMI/DP 8ch)> at nid 3 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 18 ports with 18 removable, self powered Root mount waiting for: usbus0 ugen0.2: <Logitech USB Optical Mouse> at usbus0 Root mount waiting for: usbus0 ugen0.3: <CNFGH19N524420003AD2 IntegratedWebcamHD> at usbus0 ugen0.4: <vendor 0x8087 product 0x0a2b> at usbus0 Root mount waiting for: usbus0 ugen0.5: <Raydium Corporation Raydium Touch System> at usbus0 Root mount waiting for: usbus0 ugen0.6: <Broadcom Corp 5880> at usbus0 anon_inodefs_init: drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] Memory usable by graphics device = 4096M Failed to add WC MTRR for [0xc0000000-0xcfffffff]: -22; performance may suffer [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] DMC: load work fn start i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2 [drm] Connector eDP-1: get mode from tunables: [drm] - kern.vt.fb.modes.eDP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector DP-2: get mode from tunables: [drm] - kern.vt.fb.modes.DP-2 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode i915/kbl_huc_ver02_00.bin: could not load firmware image, error 2 i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2 [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1) [drm] DMC: load work fn end i915/kbl_huc_ver02_00.bin: could not load firmware image, error 2 [drm] GuC firmware load skipped [drm] Initialized i915 1.6.0 20170123 for drmn0 on minor 0 hdacc1: Unexpected unsolicited response with tag 63: ffffffff hdacc1: Unexpected unsolicited response with tag 63: ffffffff hdacc1: Unexpected unsolicited response with tag 63: ffffffff hdacc1: Unexpected unsolicited response with tag 63: ffffffff coretemp0: <CPU On-Die Thermal Sensors> on cpu0 VT: Replacing driver "efifb" with new "fb". start FB_INFO: type=11 height=1080 width=1920 depth=32 cmsize=16 size=8294400 pbase=0xc0040000 vbase=0xfffff800c0040000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: inteldrmfb frame buffer device acpi_video0: <ACPI video extension> on vgapci0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 Cuse v0.1.35 @ /dev/cuse fuse-freebsd: version 0.4.4, FUSE ABI 7.8 lo0: link state changed to UP [drm] RC6 on iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xef100000-0xef101fff irq 18 at device 0.0 on pci2 iwm0: hw rev 0x230, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] ums0 on uhub0 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/54.00, addr 1> on usbus0 ums0: 8 buttons and [XYZT] coordinates ID=0 uhid0 on uhub0 uhid0: <Raydium Corporation Raydium Touch System, class 0/0, rev 2.01/0.00, addr 4> on usbus0 ubt0 on uhub0 ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.10, addr 3> on usbus0 wlan0: Ethernet address: [_MAC_XXXXXXXXXX]