Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-11-24 16:29:53
From: 32k
Description: SABERTOOTH 990FX R2.0
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT GENERIC-NODEBUG amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 1680x1050 CPU: AMD FX(tm)-8350 Eight-Core Processor (4013.84-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16501161984 (15736 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181031/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard Launching APs: 1 2 5 4 7 6 3 Timecounter "TSC-low" frequency 2006917864 Hz quality 1000 random: entropy device external interface module_register_init: MOD_LOAD (vesa, 0xffffffff8113e0f0, 0) error 19 kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) AMD-Vi: IVRS Info VAsize = 64 PAsize = 52 GVAsize = 0 flags:0 cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0xa, ECDT> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xfea20000-0xfea3ffff at device 0.0 on pci1 vgapci0: Boot video device hdac0: <ATI RV910 HDA Controller> mem 0xfea40000-0xfea43fff at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 ahci0: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe900000-0xfe9001ff at device 0.0 on pci2 ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahci0: quirks=0xc00000<NOCCS,NOAUX> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci3: <ACPI PCI bus> on pcib3 ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xc050-0xc057,0xc040-0xc043,0xc030-0xc037,0xc020-0xc023,0xc000-0xc01f mem 0xfe800000-0xfe8001ff at device 0.0 on pci3 ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahci1: quirks=0xc00000<NOCCS,NOAUX> ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci4: <ACPI PCI bus> on pcib4 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe700000-0xfe707fff at device 0.0 on pci4 xhci0: 32 bytes context size, 32-bit DMA xhci0: Unable to map MSI-X table usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib5: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 11.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 13.0 on pci0 pci7: <ACPI PCI bus> on pcib7 ahci2: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff at device 17.0 on pci0 ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported ahci2: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich4: <AHCI channel> at channel 0 on ahci2 ahcich5: <AHCI channel> at channel 1 on ahci2 ahcich6: <AHCI channel> at channel 2 on ahci2 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff at device 18.0 on pci0 usbus1 on ohci0 usbus1: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff at device 19.0 on pci0 usbus3 on ohci1 usbus3: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff at device 19.2 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci1 usbus4: 480Mbps High Speed USB v2.0 hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib8: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci8: <ACPI PCI bus> on pcib8 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff at device 20.5 on pci0 usbus5 on ohci2 usbus5: 12Mbps Full Speed USB v1.0 pcib9: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci10: <ACPI PCI bus> on pcib10 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff at device 0.0 on pci10 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: netmap queues/slots: TX 1/256, RX 1/256 pcib11: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci11: <ACPI PCI bus> on pcib11 xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe600000-0xfe607fff at device 0.0 on pci11 xhci1: 32 bytes context size, 32-bit DMA xhci1: Unable to map MSI-X table usbus6 on xhci1 usbus6: 5.0Gbps Super Speed USB v3.0 pcib12: <ACPI PCI-PCI bridge> at device 21.3 on pci0 pci12: <ACPI PCI bus> on pcib12 xhci2: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe500000-0xfe507fff at device 0.0 on pci12 xhci2: 32 bytes context size, 32-bit DMA xhci2: Unable to map MSI-X table usbus7 on xhci2 usbus7: 5.0Gbps Super Speed USB v3.0 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff at device 22.0 on pci0 usbus8 on ohci3 usbus8: 12Mbps Full Speed USB v1.0 ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff at device 22.2 on pci0 usbus9: EHCI version 1.0 usbus9 on ehci2 usbus9: 480Mbps High Speed USB v2.0 amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ivhd0: <AMD-Vi/IOMMU ivhd> on acpi0 ivhd0: Flag:3e<PassPW,ResPassPW,Isoc,IotlbSup,Coherent> ivhd0: Features(type:0x10) HATS = 0 GATS = 0 MsiNumPPR = 0 PNBanks= 0 PNCounters= 0 ivhd0: max PASID = 0 GLXSup = 0 Feature:0 ivhd0: supported paging level:7, will use only: 4 ivhd0: device range: 0x0 - 0xc00 ivhd0: device [0xa0 - 0xa0]config:d7<INIT,ExtInt,NMI,LINT0> ivhd0: PCI cap 0x10b540f@0x40 feature:1<IOTLB> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 ugen2.1: <ATI EHCI root HUB> at usbus2 ugen9.1: <ATI EHCI root HUB> at usbus9 ugen5.1: <ATI OHCI root HUB> at usbus5 ugen6.1: <0x1b21 XHCI root HUB> at usbus6 ugen7.1: <0x1b21 XHCI root HUB> at usbus7 ugen4.1: <ATI EHCI root HUB> at usbus4 ugen1.1: <ATI OHCI root HUB> at usbus1 ugen8.1: <ATI OHCI root HUB> at usbus8 uhub0: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus7 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub5: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus8 ugen0.1: <0x1b21 XHCI root HUB> at usbus0 ugen3.1: <ATI OHCI root HUB> at usbus3 uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus9 uhub7: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub9: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ada0 at ahcich4 bus 0 scbus4 target 0 lun 0 ada0: <TOSHIBA HDWD110 MS2OA8J0> ATA8-ACS SATA 3.x device ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich5 bus 0 scbus5 target 0 lun 0 ada1: <WDC WD10EZEX-08WN4A0 02.01A02> ACS-3 ATA SATA 3.x device ada1: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) ada2 at ahcich6 bus 0 scbus6 target 0 lun 0 ada2: <Samsung SSD 850 PRO 256GB EXM04B6Q> ACS-2 ATA SATA 3.x device ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada2: Command Queueing enabled ada2: 244198MB (500118192 512 byte sectors) ada2: quirks=0x3<4K,NCQ_TRIM_BROKEN> Trying to mount root from zfs:polygon/FreeBSD/r340444 []... Root mount waiting for: usbus9 usbus8 usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub9: 2 ports with 2 removable, self powered uhub4: 4 ports with 4 removable, self powered uhub3: 5 ports with 5 removable, self powered uhub8: 5 ports with 5 removable, self powered uhub1: 4 ports with 4 removable, self powered uhub5: 4 ports with 4 removable, self powered uhub7: 4 ports with 4 removable, self powered Root mount waiting for: usbus9 usbus4 usbus2 uhub6: 4 ports with 4 removable, self powered uhub0: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered ugen3.2: <CHICONY HP Basic USB Keyboard> at usbus3 ukbd0 on uhub8 ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 2> on usbus3 kbd2 at ukbd0 ugen3.3: <Logitech Optical USB Mouse> at usbus3 bridge0: Ethernet address: [_MAC_XXXXXXXXXX] tap0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP re0: link state changed to DOWN tap0: promiscuous mode enabled bridge0: link state changed to DOWN re0: link state changed to UP intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 ums0 on uhub8 ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 3> on usbus3 ums0: 3 buttons and [XYZ] coordinates ID=0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled CPU: AMD FX(tm)-8350 Eight-Core Processor (4013.84-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics