Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-02 07:35:30
From: miltonott
Description: FreeBSD/i386 on Supermicro P8SGA
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RC3 r341271 GENERIC i386 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.17-MHz 686-class CPU) Origin="GenuineIntel" Id=0xf41 Family=0xf Model=0x4 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR> AMD Features=0x100000<NX> TSC: P-state invariant real memory = 3221225472 (3072 MB) avail memory = 3118800896 (2974 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <IntelR AWRDACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads arc4random: no preloaded entropy cache ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1500086494 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0x15f8e50, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <IntelR AWRDACPI> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x73 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xe400-0xe407 mem 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0380000-0xd03bffff irq 16 at device 2.0 on pci0 agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xd0104000-0xd0104fff,0xd0100000-0xd0103fff irq 17 at device 0.0 on pci2 re1: Using 1 MSI-X message re1: Chip rev. 0x2c000000 re1: MAC rev. 0x00200000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: [_MAC_XXXXXXXXXX] uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xe000-0xe01f irq 23 at device 29.0 on pci0 uhci0: LegSup = 0x3000 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xe100-0xe11f irq 19 at device 29.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xe200-0xe21f irq 18 at device 29.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xe300-0xe31f irq 16 at device 29.3 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xd03c0000-0xd03c03ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 ath0: <Atheros 9227> mem 0xd0220000-0xd022ffff irq 20 at device 0.0 on pci3 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 2 RX streams; 2 TX streams ath0: Enabling register serialisation arc4random: no preloaded entropy cache ath0: AR9227 mac 384.2 RF5133 phy 15.15 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 re2: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0240000-0xd02400ff irq 21 at device 1.0 on pci3 re2: Chip rev. 0x10000000 re2: MAC rev. 0x00000000 miibus2: <MII bus> on re2 rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re2: Using defaults for TSO: 65518/35/2048 re2: Ethernet address: [_MAC_XXXXXXXXXX] em0: <Intel(R) PRO/1000 Network Connection> port 0xd100-0xd13f mem 0xd0200000-0xd021ffff irq 19 at device 11.0 on pci3 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: [_MAC_XXXXXXXXXX] pcm0: <Intel ICH6 (82801FB)> port 0xe500-0xe5ff,0xe600-0xe63f mem 0xd03c1000-0xd03c11ff,0xd03c2000-0xd03c20ff irq 17 at device 30.2 on pci0 pcm0: primary codec not ready! pcm0: <Avance Logic ALC650 AC97 Codec> isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.2 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xcc000-0xccfff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. Timecounters tick every 1.000 msec ugen4.1: <Intel EHCI root HUB> at usbus4 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 840 PRO Series DXM05B0Q> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada0: 122104MB (250069680 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> ada1 at ata1 bus 0 scbus1 target 0 lun 0 ada1: <Samsung SSD 840 PRO Series DXM05B0Q> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada1: 122104MB (250069680 512 byte sectors) ada1: quirks=0x3<4K,NCQ_TRIM_BROKEN> cd0 at ata0 bus 0 scbus0 target 1 lun 0 cd0: <HL-DT-ST BDDVDRW CH29N 1.01> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: 3190MB (1633664 2048 byte sectors) Trying to mount root from cd9660:/dev/iso9660/12_0_RC3_I386_DVD [ro]... uhub0: 8 ports with 8 removable, self powered ugen0.2: <GAMEING Rapoo V700 Mechanical Gaming Keyboard> at usbus0 ukbd0 on uhub2 ukbd0: <GAMEING Rapoo V700 Mechanical Gaming Keyboard, class 0/0, rev 1.10/0.00, addr 2> on usbus0 kbd2 at ukbd0 random: unblocking device. lo0: link state changed to UP re0: link state changed to DOWN re1: link state changed to DOWN re2: link state changed to DOWN ums0 on uhub2 ums0: <GAMEING Rapoo V700 Mechanical Gaming Keyboard, class 0/0, rev 1.10/0.00, addr 2> on usbus0 ums0: 6 buttons and [XYZT] coordinates ID=1