Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-12-04 19:24:38
From: psa
Description: FreeBSD/amd64 on System manufacturer System Product Name
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p6 #12: Wed Dec 13 07:27:15 UTC 2017
    [_EMAIL_XXXXXXXXXXXX]:/usr/obj/usr/src/sys/EMU amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
CPU: AMD Athlon(tm) II X4 610e Processor (2410.73-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f53  Family=0x10  Model=0x5  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
  SVM: (disabled in BIOS) NP,NRIP,NAsids=64
  TSC: P-state invariant
real memory  = 17179869184 (16384 MB)
avail memory = 16340897792 (15583 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <090610 APIC1403>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20170303/tbfadt-748)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1205365585 Hz quality 800
random: entropy device external interface
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80bd43f0, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
acpi0: <090610 XSDT1403> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 450
Event timer "HPET2" frequency 14318180 Hz quality 450
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem 0xd0000000-0xdfffffff,0xfe7f0000-0xfe7fffff,0xfe600000-0xfe6fffff irq 18 at device 5.0 on pci1
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mps0: <Avago Technologies (LSI) SAS2116> port 0xb000-0xb0ff mem 0xfe8fc000-0xfe8fffff,0xfe880000-0xfe8bffff irq 18 at device 0.0 on pci2
mps0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mps0: IOCCapabilities: 285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay>
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <NEC uPD720200 USB 3.0 controller> mem 0xfe9fe000-0xfe9fffff irq 19 at device 0.0 on pci3
xhci0: 32 bytes context size, 32-bit DMA
xhci0: Unable to map MSI-X table 
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci4: <ACPI PCI bus> on pcib4
atapci0: <VIA ATA controller> port 0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f irq 17 at device 0.0 on pci4
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at device 0.0 on pci5
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
re0: netmap queues/slots: TX 1/256, RX 1/256
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5ff000-0xfe5fffff irq 18 at device 18.0 on pci0
usbus1 on ohci0
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5fec00-0xfe5fecff irq 17 at device 18.2 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fd000-0xfe5fdfff irq 18 at device 19.0 on pci0
usbus3 on ohci1
usbus3: 12Mbps Full Speed USB v1.0
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5fe800-0xfe5fe8ff irq 17 at device 19.2 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci1
usbus4: 480Mbps High Speed USB v2.0
atapci1: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
hdac0: <ATI SB600 HDA Controller> mem 0xfe5f8000-0xfe5fbfff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
re1: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xe800-0xe8ff mem 0xfebffc00-0xfebffcff irq 20 at device 5.0 on pci6
re1: Chip rev. 0x10000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: [_MAC_XXXXXXXXXX]
re1: netmap queues/slots: TX 1/256, RX 1/256
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5fc000-0xfe5fcfff irq 18 at device 20.5 on pci0
usbus5 on ohci2
usbus5: 12Mbps Full Speed USB v1.0
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe5f7000-0xfe5f7fff irq 18 at device 22.0 on pci0
usbus6 on ohci3
usbus6: 12Mbps Full Speed USB v1.0
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe5fe400-0xfe5fe4ff irq 17 at device 22.2 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci2
usbus7: 480Mbps High Speed USB v2.0
acpi_button0: <Power Button> on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
nvme cam probe device init
ugen5.1: <ATI OHCI root HUB> at usbus5
ugen2.1: <ATI EHCI root HUB> at usbus2
ugen4.1: <ATI EHCI root HUB> at usbus4
ugen7.1: <ATI EHCI root HUB> at usbus7
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen3.1: <ATI OHCI root HUB> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen1.1: <ATI OHCI root HUB> at usbus1
ugen6.1: <ATI OHCI root HUB> at usbus6
ugen0.1: <0x1033 XHCI root HUB> at usbus0
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub7: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
hdacc0: <Realtek ALC892 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc0
mps0: SAS Address for SATA device = 696b641baf678a96
mps0: SAS Address for SATA device = 696c641baf678a96
pcm0: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
mps0: SAS Address for SATA device = 6967641baf678a96
mps0: SAS Address for SATA device = 716389399ed800b0
mps0: SAS Address for SATA device = d2644633decab76e
mps0: SAS Address for SATA device = 6a6e641baf678a96
pcm1: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa0
mps0: SAS Address for SATA device = 696a641baf678a96
mps0: SAS Address for SATA device = 6981681ba567868d
pcm2: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa0
mps0: SAS Address from SATA device = 696b641baf678a96
pcm3: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa0
mps0: SAS Address from SATA device = 696c641baf678a96
mps0: SAS Address from SATA device = 6967641baf678a96
mps0: SAS Address from SATA device = 716389399ed800b0
mps0: SAS Address from SATA device = d2644633decab76e
mps0: SAS Address from SATA device = 6a6e641baf678a96
mps0: SAS Address from SATA device = 696a641baf678a96
mps0: SAS Address from SATA device = 6981681ba567868d
uhub0: 2 ports with 2 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub5: 5 ports with 5 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub1: 5 ports with 5 removable, self powered
da3 at mps0 bus 0 scbus0 target 4 lun 0
da3: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SPC-3 SCSI device
da3: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 2861588MB (5860533168 512 byte sectors)
da3: quirks=0x8<4K>
da2 at mps0 bus 0 scbus0 target 3 lun 0
da2: <ATA Hitachi HDS72302 A180> Fixed Direct Access SPC-3 SCSI device
da2: [_SERIAL_NUMBER_XXXXXXXXXXX]
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors)
da6 at mps0 bus 0 scbus0 target 7 lun 0
da6: <ATA SAMSUNG HD203WI 0003> Fixed Direct Access SPC-3 SCSI device
da6: [_SERIAL_NUMBER_XXXXXXXXXXX]      
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 1907729MB (3907029168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 1 lun 0
da0: <ATA SAMSUNG HD154UI 1118> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXX]      
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1430799MB (2930277168 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 2 lun 0
da1: <ATA SAMSUNG HD154UI 1118> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXX]      
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1430799MB (2930277168 512 byte sectors)
da4 at mps0 bus 0 scbus0 target 5 lun 0
da4: <ATA SAMSUNG HD154UI 1118> Fixed Direct Access SPC-3 SCSI device
da4: [_SERIAL_NUMBER_XXXXXXXXXXX]      
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1430799MB (2930277168 512 byte sectors)
da5 at mps0 bus 0 scbus0 target 6 lun 0
da5: <ATA SAMSUNG HD154UI 1118> Fixed Direct Access SPC-3 SCSI device
da5: [_SERIAL_NUMBER_XXXXXXXXXXX]      
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 1430799MB (2930277168 512 byte sectors)
da7 at mps0 bus 0 scbus0 target 8 lun 0
da7: <ATA SAMSUNG HD154UI 1118> Fixed Direct Access SPC-3 SCSI device
da7: [_SERIAL_NUMBER_XXXXXXXXXXX]      
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 1430799MB (2930277168 512 byte sectors)
Trying to mount root from zfs:zroot/ROOT/default []...
GEOM: da7: the secondary GPT header is not in the last LBA.
GEOM: diskid/DISK-S1XWJ1SZA03666%20%20%20%20%20%20: the secondary GPT header is not in the last LBA.
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge1: Ethernet address: [_MAC_XXXXXXXXXX]
epair0a: Ethernet address: [_MAC_XXXXXXXXXX]
epair0b: Ethernet address: [_MAC_XXXXXXXXXX]
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: [_MAC_XXXXXXXXXX]
epair1b: Ethernet address: [_MAC_XXXXXXXXXX]
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: [_MAC_XXXXXXXXXX]
epair2b: Ethernet address: [_MAC_XXXXXXXXXX]
epair2a: link state changed to UP
epair2b: link state changed to UP
epair3a: Ethernet address: [_MAC_XXXXXXXXXX]
epair3b: Ethernet address: [_MAC_XXXXXXXXXX]
epair3a: link state changed to UP
epair3b: link state changed to UP
epair4a: Ethernet address: [_MAC_XXXXXXXXXX]
epair4b: Ethernet address: [_MAC_XXXXXXXXXX]
epair4a: link state changed to UP
epair4b: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN
re0: promiscuous mode enabled
bridge0: link state changed to DOWN
epair0b: promiscuous mode enabled
bridge0: link state changed to UP
epair1b: promiscuous mode enabled
epair2b: promiscuous mode enabled
re1: promiscuous mode enabled
bridge1: link state changed to DOWN
epair3b: promiscuous mode enabled
bridge1: link state changed to UP
epair4b: promiscuous mode enabled
re0: link state changed to UP
re1: link state changed to UP
pflog0: promiscuous mode enabled