Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2018-12-05 02:45:39
From: herauthon
Description: AMD K6/2-500 @ 5MVP3
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.25 (P5AB-1) #0: Sat Nov 24 14:17:19 UTC 2018 [ 1.0000000] root@breeder:/efs/src/sys/arch/i386/compile/obj/P5AB-1 [ 1.0000000] total memory = 383 MB [ 1.0000000] avail memory = 361 MB [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] Kernelized RAIDframe activated [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.0000030] Generic PC [ 1.0000030] mainbus0 (root) [ 1.0000030] Firmware Error (ACPI): A valid RSDP was not found (20180810/tbxfroot-261) [ 1.0000030] autoconfiguration error: acpi_probe: failed to initialize tables [ 1.0000030] ACPI Error: Could not remove SCI handler (20180810/evmisc-312) [ 1.0000030] cpu0 at mainbus0 [ 1.0000030] cpu0: AMD-K6(tm) 3D processor, id 0x58c [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0000030] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.0000030] pchb0 at pci0 dev 0 function 0: vendor 1106 product 0597 (rev. 0x04) [ 1.0000030] agp0 at pchb0: aperture at 0xea000000, size 0x400000 [ 1.0000030] ppb0 at pci0 dev 1 function 0: vendor 1106 product 8598 (rev. 0x00) [ 1.0000030] pci1 at ppb0 bus 1 [ 1.0000030] pci1: i/o space, memory space enabled [ 1.0000030] vga0 at pci1 dev 0 function 0: vendor 1002 product 4742 (rev. 0x5c) [ 1.0000030] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) [ 1.0000030] wsmux1: connecting to wsdisplay0 [ 1.0000030] wsdisplay0: screen 1-7 added (80x25, vt100 emulation) [ 1.0000030] drm at vga0 not configured [ 1.0000030] pcib0 at pci0 dev 7 function 0: vendor 1106 product 0586 (rev. 0x47) [ 1.0000030] pciide0 at pci0 dev 7 function 1: vendor 1106 product 0571 (rev. 0x06) [ 1.0000030] pciide0: I/O access disabled at device [ 1.0000030] uhci0 at pci0 dev 7 function 2: vendor 1106 product 3038 (rev. 0x02) [ 1.0000030] uhci0: interrupting at irq 11 [ 1.0000030] usb0 at uhci0: USB revision 1.0 [ 1.0000030] pchb1 at pci0 dev 7 function 3: vendor 1106 product 3040 (rev. 0x10) [ 1.0000030] pdcide0 at pci0 dev 8 function 0: Promise Ultra133/ATA Bus Master IDE Accelerator (rev. 0x02) [ 1.0000030] pdcide0: bus-master DMA support present [ 1.0000030] pdcide0: primary channel configured to native-PCI mode [ 1.0000030] pdcide0: using irq 15 for native-PCI interrupt [ 1.0000030] atabus0 at pdcide0 channel 0 [ 1.0000030] pdcide0: secondary channel configured to native-PCI mode [ 1.0000030] atabus1 at pdcide0 channel 1 [ 1.0000030] esiop0 at pci0 dev 9 function 0: Symbios Logic 53c875 (ultra-wide scsi) [ 1.0000030] esiop0: using on-board RAM [ 1.0000030] esiop0: interrupting at irq 10 [ 1.0000030] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.0000030] esiop1 at pci0 dev 9 function 1: Symbios Logic 53c875 (ultra-wide scsi) [ 1.0000030] esiop1: using on-board RAM [ 1.0000030] esiop1: interrupting at irq 12 [ 1.0000030] scsibus1 at esiop1: 16 targets, 8 luns per target [ 1.0000030] ppb1 at pci0 dev 10 function 0: vendor 1011 product 0024 (rev. 0x03) [ 1.0000030] pci2 at ppb1 bus 2 [ 1.0000030] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.0000030] fxp0 at pci2 dev 4 function 0: i82558 Ethernet (rev. 0x05) [ 1.0000030] fxp0: interrupting at irq 12 [ 1.0000030] fxp0: May need receiver lock-up workaround [ 1.0000030] fxp0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000030] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0 [ 1.0000030] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000030] fxp1 at pci2 dev 5 function 0: i82558 Ethernet (rev. 0x05) [ 1.0000030] fxp1: interrupting at irq 14 [ 1.0000030] fxp1: May need receiver lock-up workaround [ 1.0000030] fxp1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000030] inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0 [ 1.0000030] inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000030] isa0 at pcib0 [ 1.0000030] pckbc0 at isa0 port 0x60-0x64 [ 1.0000030] pckbd0 at pckbc0 (kbd slot) [ 1.0000030] pckbc0: using irq 1 for kbd slot [ 1.0000030] wskbd0 at pckbd0: console keyboard, using wsdisplay0 [ 1.0000030] attimer0 at isa0 port 0x40-0x43 [ 1.0000030] pcppi0 at isa0 port 0x61 [ 1.0000030] midi0 at pcppi0: PC speaker [ 1.0000030] sysbeep0 at pcppi0 [ 1.0000030] isapnp0 at isa0 port 0x279 [ 1.0000030] attimer0: attached to pcppi0 [ 1.0000030] isapnp0: no ISA Plug 'n Play devices found [ 1.0000030] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.0136874] scsibus0: waiting 2 seconds for devices to settle... [ 1.0136874] scsibus1: waiting 2 seconds for devices to settle... [ 1.0636873] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.0636873] uhub0: 2 ports with 2 removable, self powered [ 1.0737017] IPsec: Initialized Security Association Processing. [ 4.1137250] wd0 at atabus0 drive 0 [ 4.1137250] wd0: <ST3320820A> [ 4.1137250] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 4.1137250] wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors [ 4.1537339] wd0: 32-bit data port [ 4.1537339] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 4.1537339] wd0(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 5.2237467] sd0 at scsibus1 target 0 lun 0: <HP 36.4G, ST336753LC, HPC4> disk fixed [ 5.2237467] sd0: 34732 MB, 31310 cyl, 4 head, 567 sec, 512 bytes/sect x 71132960 sectors [ 5.2437454] sd0: sync (50.00ns offset 16), 16-bit (40.000MB/s) transfers, tagged queueing [ 7.4037838] WARNING: 1 error while detecting hardware; check system log. [ 7.4037838] boot device: wd0 [ 7.4037838] root on wd0a dumps on wd0b [ 7.4337809] root file system type: ffs [ 7.4337809] kern.module.path=/stand/i386/8.99.25/modules