Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-12 07:52:48
From: step
Description: SuperMicro A2SDi-4C-HLN4F
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(efifb): resolution 1024x768 CPU: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz (2200.07-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506f1 Family=0x6 Model=0x5f Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16565743616 (15798 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL TIANO > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 2 1 3 Timecounter "TSC-low" frequency 1100035881 Hz quality 1000 random: entropy device external interface kbd0 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 efirtc0: <EFI Realtime Clock> on motherboard efirtc0: registered as a time-of-day clock, resolution 1.000000s cryptosoft0: <software crypto> on motherboard acpi0: <SUPERM SMCI--MB> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 Event timer "HPET3" frequency 24000000 Hz quality 440 Event timer "HPET4" frequency 24000000 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <processor> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> mem 0xdf420000-0xdf43ffff at device 10.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> mem 0xdf400000-0xdf41ffff at device 17.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 vgapci0: <VGA-compatible display> port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff at device 0.0 on pci4 ahci0: <Intel Denverton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe040-0xe05f mem 0xdf456000-0xdf457fff,0xdf45d000-0xdf45d0ff,0xdf45c000-0xdf45c7ff at device 19.0 on pci0 ahci0: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 ahci1: <Intel Denverton AHCI SATA controller> port 0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf454000-0xdf455fff,0xdf45b000-0xdf45b0ff,0xdf45a000-0xdf45a7ff at device 20.0 on pci0 ahci1: AHCI v1.31 with 4 6Gbps ports, Port Multiplier not supported ahcich4: <AHCI channel> at channel 0 on ahci1 ahcich5: <AHCI channel> at channel 1 on ahci1 ahcich9: <AHCI channel> at channel 5 on ahci1 ahcich10: <AHCI channel> at channel 6 on ahci1 ahciem1: <AHCI enclosure management bridge> on ahci1 xhci0: <Intel Denverton USB 3.0 controller> mem 0xdf440000-0xdf44ffff at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pcib5: <ACPI PCI-PCI bridge> at device 22.0 on pci0 pci5: <ACPI PCI bus> on pcib5 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xddc00000-0xdddfffff,0xdde04000-0xdde07fff at device 0.0 on pci5 ix0: using 2048 tx descriptors and 2048 rx descriptors ix0: msix_init qsets capped at 64 ix0: pxm cpus: 4 queue msgs: 63 admincnt: 1 ix0: using 4 rx queues 4 tx queues ix0: Using MSIX interrupts with 5 vectors ix0: allocated for 4 queues ix0: allocated for 4 rx queues ix0: Ethernet address: [_MAC_XXXXXXXXXX] ix0: netmap queues/slots: TX 4/2048, RX 4/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xdda00000-0xddbfffff,0xdde00000-0xdde03fff at device 0.1 on pci5 ix1: using 2048 tx descriptors and 2048 rx descriptors ix1: msix_init qsets capped at 64 ix1: pxm cpus: 4 queue msgs: 63 admincnt: 1 ix1: using 4 rx queues 4 tx queues ix1: Using MSIX interrupts with 5 vectors ix1: allocated for 4 queues ix1: allocated for 4 rx queues ix1: Ethernet address: [_MAC_XXXXXXXXXX] ix1: netmap queues/slots: TX 4/2048, RX 4/2048 pcib6: <ACPI PCI-PCI bridge> at device 23.0 on pci0 pci6: <ACPI PCI bus> on pcib6 ix2: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xdd600000-0xdd7fffff,0xdd804000-0xdd807fff at device 0.0 on pci6 ix2: using 2048 tx descriptors and 2048 rx descriptors ix2: msix_init qsets capped at 64 ix2: pxm cpus: 4 queue msgs: 63 admincnt: 1 ix2: using 4 rx queues 4 tx queues ix2: Using MSIX interrupts with 5 vectors ix2: allocated for 4 queues ix2: allocated for 4 rx queues ix2: Ethernet address: [_MAC_XXXXXXXXXX] ix2: netmap queues/slots: TX 4/2048, RX 4/2048 ix3: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xdd400000-0xdd5fffff,0xdd800000-0xdd803fff at device 0.1 on pci6 ix3: using 2048 tx descriptors and 2048 rx descriptors ix3: msix_init qsets capped at 64 ix3: pxm cpus: 4 queue msgs: 63 admincnt: 1 ix3: using 4 rx queues 4 tx queues ix3: Using MSIX interrupts with 5 vectors ix3: allocated for 4 queues ix3: allocated for 4 rx queues ix3: Ethernet address: [_MAC_XXXXXXXXXX] ix3: netmap queues/slots: TX 4/2048, RX 4/2048 pci0: <simple comms> at device 24.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) pci0: <serial bus> at device 31.5 (no driver attached) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich4 bus 0 scbus5 target 0 lun 0 ada0: <M.2 2242 Q1107A0> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich9 bus 0 scbus7 target 0 lun 0 ada1: <ST12000VN0007-2GS116 SC60> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 11444224MB (23437770752 512 byte sectors) ada2 at ahcich10 bus 0 scbus8 target 0 lun 0 ada2: <ST12000VN0007-2GS116 SC60> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 11444224MB (23437770752 512 byte sectors) ses0 at ahciem0 bus 0 scbus4 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses1 at ahciem1 bus 0 scbus9 target 0 lun 0 ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses1: SEMB SES Device Trying to mount root from ufs:/dev/gpt/root [rw]... uhub0: 8 ports with 8 removable, self powered ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0 uhub1: MTT enabled uhub1: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x0557 product 0x7000> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 2> on usbus0 uhub2: 4 ports with 3 removable, self powered lo0: link state changed to UP ugen0.4: <vendor 0x0557 product 0x2419> at usbus0 ukbd0 on uhub2 ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 kbd1 at ukbd0 ugen0.5: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub3 on uhub1 uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 4> on usbus0 uhub3: MTT enabled uhub3: 4 ports with 4 removable, self powered ix2: link state changed to UP ums0 on uhub2 ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 3> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0