Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-12 07:56:46
From: step
Description: ASRock E3C226D2I
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz (3192.95-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16591015936 (15822 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 3 1 2 Timecounter "TSC-low" frequency 1596475504 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7300000-0xf730ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7313000-0xf73133ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xe000-0xe01f mem 0xf7200000-0xf727ffff,0xf7280000-0xf7283fff irq 18 at device 0.0 on pci2 igb0: attach_pre capping queues at 4 igb0: using 1024 tx descriptors and 1024 rx descriptors igb0: msix_init qsets capped at 4 igb0: pxm cpus: 4 queue msgs: 4 admincnt: 1 igb0: using 4 rx queues 4 tx queues igb0: Using MSIX interrupts with 5 vectors igb0: allocated for 4 tx_queues igb0: allocated for 4 rx_queues igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 19 at device 0.0 on pci3 igb1: attach_pre capping queues at 4 igb1: using 1024 tx descriptors and 1024 rx descriptors igb1: msix_init qsets capped at 4 igb1: pxm cpus: 4 queue msgs: 4 admincnt: 1 igb1: using 4 rx queues 4 tx queues igb1: Using MSIX interrupts with 5 vectors igb1: allocated for 4 tx_queues igb1: allocated for 4 rx_queues igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib5 vgapci0: <VGA-compatible display> port 0xc000-0xc07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 19 at device 0.0 on pci5 vgapci0: Boot video device ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7312000-0xf73123ff irq 22 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7311000-0xf73117ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Crucial CT480M500SSD1 MU03> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 457862MB (937703088 512 byte sectors) ada0: quirks=0x2<NCQ_TRIM_BROKEN> ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD40EFRX-68WT0N0 80.00A80> ACS-2 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 3815447MB (7814037168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD40EFRX-68WT0N0 80.00A80> ACS-2 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada2: quirks=0x1<4K> ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD40EFRX-68WT0N0 80.00A80> ACS-2 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) ada3: quirks=0x1<4K> ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <WDC WD40EFRX-68WT0N0 80.00A80> ACS-2 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 3815447MB (7814037168 512 byte sectors) ada4: quirks=0x1<4K> ada5 at ahcich5 bus 0 scbus5 target 0 lun 0 ada5: <WDC WD40EFRX-68WT0N0 80.00A80> ACS-2 ATA SATA 3.x device ada5: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 3815447MB (7814037168 512 byte sectors) ada5: quirks=0x1<4K> ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device Trying to mount root from ufs:/dev/gpt/root-ssd [rw]... uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub1: 21 ports with 21 removable, self powered ugen0.2: <American Megatrends Inc. Virtual Hub> at usbus0 uhub3 on uhub1 uhub3: <7-port Hub> on usbus0 ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub5 on uhub2 uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 uhub4: 6 ports with 6 removable, self powered uhub5: 8 ports with 8 removable, self powered uhub3: 5 ports with 5 removable, self powered ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0 ukbd0 on uhub3 ukbd0: <Keyboard Interface> on usbus0 kbd2 at ukbd0 WARNING: / was not properly dismounted ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.4: <JMicron USB to ATA/ATAPI Bridge> at usbus0 umass0 on uhub1 umass0: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 3.00/28.0e, addr 3> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:7:0: Attached to scbus7 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI status: Check Condition (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim0:0:0:0): Error 22, Unretryable error da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 da0: <WDC WD60 EFRX-68MYMN1 0X0>> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 400.000MB/s transfers da0: 5723166MB (11721045168 512 byte sectors) da0: quirks=0xa<NO_6_BYTE,4K> da1 at umass-sim0 bus 0 scbus7 target 0 lun 1 da1: <WDC WD60 EFRX-68MYMN1 0X0>> Fixed Direct Access SPC-4 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXX] da1: 400.000MB/s transfers da1: 5723166MB (11721045168 512 byte sectors) da1: quirks=0xa<NO_6_BYTE,4K> da2 at umass-sim0 bus 0 scbus7 target 0 lun 2 da2: <ST8000AS 0002-1NA17Z 0X0>> Fixed Direct Access SPC-4 SCSI device da2: [_SERIAL_NUMBER_XXXXXXXXX] da2: 400.000MB/s transfers da2: 7630885MB (15628053168 512 byte sectors) da2: quirks=0x2<NO_6_BYTE> da3 at umass-sim0 bus 0 scbus7 target 0 lun 3 da3: <Hitachi HDS5C3030ALA630 0X0>> Fixed Direct Access SPC-4 SCSI device da3: [_SERIAL_NUMBER_XXXXXXXXX] da3: 400.000MB/s transfers da3: 2861588MB (5860533168 512 byte sectors) da3: quirks=0x2<NO_6_BYTE> GEOM: da1: the secondary GPT table is corrupt or invalid. GEOM: da1: using the primary only -- recovery suggested. GEOM: da3: the secondary GPT table is corrupt or invalid. GEOM: da3: using the primary only -- recovery suggested. ugen0.5: <JMicron USB to ATA/ATAPI Bridge> at usbus0 umass1 on uhub1 umass1: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 3.00/28.0e, addr 4> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x4000 umass1:8:1: Attached to scbus8 (probe0:umass-sim1:1:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 (probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error (probe0:umass-sim1:1:0:0): SCSI status: Check Condition (probe0:umass-sim1:1:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code) (probe0:umass-sim1:1:0:0): Error 22, Unretryable error da4 at umass-sim1 bus 1 scbus8 target 0 lun 0 da4: <WDC WD60 EFRX-68MYMN1 0X0>> Fixed Direct Access SPC-4 SCSI device da4: [_SERIAL_NUMBER_XXXXXXXXX] da4: 400.000MB/s transfers da4: 5723166MB (11721045168 512 byte sectors) da4: quirks=0xa<NO_6_BYTE,4K> da5 at umass-sim1 bus 1 scbus8 target 0 lun 1 da5: <ST8000AS 0002-1NA17Z 0X0>> Fixed Direct Access SPC-4 SCSI device da5: [_SERIAL_NUMBER_XXXXXXXXX] da5: 400.000MB/s transfers da5: 7630885MB (15628053168 512 byte sectors) da5: quirks=0x2<NO_6_BYTE> da6 at umass-sim1 bus 1 scbus8 target 0 lun 2 da6: <WDC WD60 EFRX-68MYMN1 0X0>> Fixed Direct Access SPC-4 SCSI device da6: [_SERIAL_NUMBER_XXXXXXXXX] da6: 400.000MB/s transfers da6: 5723166MB (11721045168 512 byte sectors) da6: quirks=0xa<NO_6_BYTE,4K> da7 at umass-sim1 bus 1 scbus8 target 0 lun 3 da7: <WDC WD30 EZRX-00MMMB0 0X0>> Fixed Direct Access SPC-4 SCSI device da7: [_SERIAL_NUMBER_XXXXXXXXX] da7: 400.000MB/s transfers da7: 2861588MB (5860533168 512 byte sectors) da7: quirks=0xa<NO_6_BYTE,4K> GEOM: da7: the secondary GPT table is corrupt or invalid. GEOM: da7: using the primary only -- recovery suggested. lo0: link state changed to UP ums0 on uhub3 ums0: <Mouse Interface> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 igb0: link state changed to UP