Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-21 01:42:14
From: lattera
Description: HardenedBSD/arm64 on a Pinebook
[1] ---<<BOOT>>--- [1] KDB: debugger backends: ddb [1] KDB: current backend: ddb [1] Copyright (c) 2013-2018 The HardenedBSD Project. [1] Copyright (c) 1992-2018 The FreeBSD Project. [1] Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 [1] The Regents of the University of California. All rights reserved. [1] FreeBSD is a registered trademark of The FreeBSD Foundation. [1] FreeBSD 13.0-CURRENT HARDENEDBSD arm64 [1] FreeBSD clang version 7.0.1 (tags/RELEASE_701/final 349250) (based on LLVM 7.0.1) [1] WARNING: WITNESS option enabled, expect reduced performance. [1] VT(efifb): resolution 1366x768 [1] HardenedBSD: initialize and check features (__HardenedBSD_version 1300058 __FreeBSD_version 1300005). [1] KLD file umodem.ko is missing dependencies [1] Starting CPU 1 (1) [1] Starting CPU 2 (2) [1] Starting CPU 3 (3) [1] FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs [1] random: unblocking device. [1] random: entropy device external interface [1] MAP 47efd000 mode 2 pages 3 [1] MAP 47f06000 mode 2 pages 3 [1] MAP b8f25000 mode 2 pages 1 [1] MAP b8f2a000 mode 2 pages 1 [1] MAP bdf52000 mode 2 pages 1 [1] kbd0 at kbdmux0 [1] ofwbus0: <Open Firmware Device Tree> [1] clk_fixed0: <Fixed clock> on ofwbus0 [1] clk_fixed1: <Fixed clock> on ofwbus0 [1] clk_fixed2: <Fixed clock> on ofwbus0 [1] simplebus0: <Flattened device tree simple bus> on ofwbus0 [1] ccu_a64ng0: <Allwinner A64 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0 [1] iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 39 on simplebus0 [1] iichb0: could not find clock [1] device_attach: iichb0 attach returned 19 [1] regfix0: <Fixed Regulator> on ofwbus0 [1] regfix1: <Fixed Regulator> on ofwbus0 [1] iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 39 on simplebus0 [1] iichb0: could not find clock [1] device_attach: iichb0 attach returned 19 [1] ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0 [1] iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 39 on simplebus0 [1] iicbus0: <OFW I2C bus> on iichb0 [1] psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 [1] aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0 [1] iichb1: <Allwinner RSB> mem 0x1f03400-0x1f037ff irq 41 on simplebus0 [1] iicbus1: <OFW I2C bus> on iichb1 [1] gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 34 on simplebus0 [1] gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224 [1] gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 17,18,19 on simplebus0 [1] gpiobus0: <OFW GPIO bus> on gpio0 [1] aw_nmi0: <Allwinner NMI Controller> mem 0x1f00c00-0x1f00fff irq 38 on simplebus0 [1] gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 40 on simplebus0 [1] gpiobus1: <OFW GPIO bus> on gpio1 [1] axp8xx_pmu0: <X-Powers AXP803 Power Management Unit> at addr 0x746 irq 43 on iicbus1 [1] gpiobus2: <OFW GPIO bus> on axp8xx_pmu0 [1] generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0 [1] Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000 [1] Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000 [1] a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c2b irq 4,5 on simplebus0 [1] Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000 [1] rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 36,37 on simplebus0 [1] rtc0: registered as a time-of-day clock, resolution 1.000000s [1] aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0 [1] awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0 [1] cpulist0: <Open Firmware CPU Group> on ofwbus0 [1] cpu0: <Open Firmware CPU> on cpulist0 [1] cpu1: <Open Firmware CPU> on cpulist0 [1] cpu2: <Open Firmware CPU> on cpulist0 [1] cpu3: <Open Firmware CPU> on cpulist0 [1] aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 9 on simplebus0 [1] mmc0: <MMC/SD bus> on aw_mmc0 [1] aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff irq 10 on simplebus0 [1] mmc1: <MMC/SD bus> on aw_mmc1 [1] aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff irq 11 on simplebus0 [1] mmc2: <MMC/SD bus> on aw_mmc2 [1] ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 13 on simplebus0 [1] usbus0: EHCI version 1.0 [1] usbus0 on ehci0 [1] ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 14 on simplebus0 [1] usbus1 on ohci0 [1] ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 15 on simplebus0 [1] usbus2: EHCI version 1.0 [1] usbus2 on ehci1 [1] ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 16 on simplebus0 [1] usbus3 on ohci1 [1] gpioc0: <GPIO controller> on gpio0 [1] uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 23 on simplebus0 [1] uart0: console (115384,n,8,1) [1] pwm0: <Allwinner PWM> mem 0x1c21400-0x1c217ff on simplebus0 [1] pwmbus0: <PWM bus> on pwm0 [1] pwmc0: <PWM Controller> on pwm0 [1] iicbus0: <unknown card> at addr 0x70 [1] iic0: <I2C generic I/O> on iicbus0 [1] gpioc1: <GPIO controller> on gpio1 [1] gpioc2: <GPIO controller> on axp8xx_pmu0 [1] iic1: <I2C generic I/O> on iicbus1 [1] aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 42 on simplebus0 [1] cryptosoft0: <software crypto> [1] Timecounters tick every 1.000 msec [1] usbus0: 480Mbps High Speed USB v2.0 [1] usbus1: 12Mbps Full Speed USB v1.0 [1] ugen0.1: <Allwinner EHCI root HUB> at usbus0 [1] ugen1.1: <Generic OHCI root HUB> at usbus1 [1] uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 [1] uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 [1] usbus2: 480Mbps High Speed USB v2.0 [1] usbus3: 12Mbps Full Speed USB v1.0 [1] ugen2.1: <Allwinner EHCI root HUB> at usbus2 [1] uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 [1] ugen3.1: <Generic OHCI root HUB> at usbus3 [1] uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 [1] mmcsd0: 32GB <SDHC ADLCD 8.0 SN 3A5D0D0C MFG 04/2017 by 3 SD> at mmc0 50.0MHz/4bit/32768-block [1] aw_mmc1: Cannot set vqmmc to 3300000<->3300000 [1] mmc0: Failed to set VCCQ for card at relative address 43690 [1] AW_MMC_INT_RESP_TIMEOUT [1] uhub0: 1 port with 1 removable, self powered [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] uhub3: 1 port with 1 removable, self powered [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] mmc1: No compatible cards found on bus [1] aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004 [1] [1] aw_mmc2: Cannot set vqmmc to 3300000<->3300000 [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] uhub1: 1 port with 1 removable, self powered [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] uhub2: 1 port with 1 removable, self powered [1] AW_MMC_INT_DATA_END_BIT_ERR [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] AW_MMC_INT_RESP_TIMEOUT [1] mmcsd1: 16GB <MMCHC NCard 4.3 SN 57644760 MFG 10/2016 by 136 0x0003> at mmc2 52.0MHz/8bit/4096-block [1] mmcsd1boot0: 4MB partion 1 at mmcsd1 [1] mmcsd1boot1: 4MB partion 2 at mmcsd1 [2] mmcsd1rpmb: 4MB partion 3 at mmcsd1 [2] Release APs...done [2] CPU 0: ARM Cortex-A53 r0p4 affinity: 0 [2] Trying to mount root from ufs:/dev/ufs/rootfs [rw]... [2] Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32> [2] Instruction Set Attributes 1 = <> [2] Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32> [2] Processor Features 1 = <0> [2] Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA> [2] Memory Model Features 1 = <> [2] Memory Model Features 2 = <32b CCIDX,48b VA> [2] Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8> [2] Debug Features 1 = <0> [2] Auxiliary Features 0 = <0> [2] Auxiliary Features 1 = <0> [2] CPU 1: ARM Cortex-A53 r0p4 affinity: 1 [2] CPU 2: ARM Cortex-A53 r0p4 affinity: 2 [2] CPU 3: ARM Cortex-A53 r0p4 affinity: 3 [2] WARNING: WITNESS option enabled, expect reduced performance. [2] ugen2.2: <vendor 0x05e3 USB2.0 Hub> at usbus2 [2] uhub4 on uhub2 [2] uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/88.32, addr 2> on usbus2 [3] uhub4: 4 ports with 1 removable, self powered [4] ugen2.3: <HAILUCK CO.,LTD USB KEYBOARD> at usbus2 [4] ukbd0 on uhub4 [4] ukbd0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 3> on usbus2 [4] kbd1 at ukbd0 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] ums0 on uhub4 [4] ums0: <HAILUCK CO.,LTD USB KEYBOARD, class 0/0, rev 1.10/1.00, addr 3> on usbus2 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] ums0: 5 buttons and [XYZT] coordinates ID=1 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] hid_get_item: Number of items(1039) truncated to 1024 [4] ugen2.4: <Realtek 802.11n WLAN Adapter> at usbus2 [5] ugen2.5: <Image Processor USB 2.0 PC Cam> at usbus2 [6] lo0: link state changed to UP [16] rtwn0 on uhub4 [16] rtwn0: <Realtek 802.11n WLAN Adapter, class 0/0, rev 2.00/2.00, addr 4> on usbus2 [16] rtwn0: MAC/BB RTL8192CU, RF 6052 2T2R [16] ieee80211_load_module: load the wlan_amrr module by hand for now. [16] wlan0: Ethernet address: [_MAC_XXXXXXXXXX] [20] wlan0: link state changed to UP