Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2018-12-21 01:47:56
From: mns
Description: HP Workstation xw8000
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 03 01 f3 f0 00 01 00 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 03 05 8e a0 00 00 b8 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 03 16 12 80 00 01 00 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 03 17 22 00 00 00 90 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 03 17 22 00 00 00 90 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
ugen2.2: <ORTEK USB Keyboard Hub> at usbus2
uhub4 on uhub3
uhub4: <ORTEK USB Keyboard Hub, class 9/0, rev 1.10/1.10, addr 2> on usbus2
uhub4: 3 ports with 2 removable, bus powered
ugen2.3: <ORTEK USB Keyboard Hub> at usbus2
ukbd0 on uhub4
ukbd0: <ORTEK USB Keyboard Hub, class 0/0, rev 1.10/1.10, addr 3> on usbus2
kbd2 at ukbd0
uhid0 on uhub4
uhid0: <ORTEK USB Keyboard Hub, class 0/0, rev 1.10/1.10, addr 3> on usbus2
ugen2.2: <ORTEK USB Keyboard Hub> at usbus2 (disconnected)
uhub4: at uhub3, port 2, addr 2 (disconnected)
ugen2.3: <ORTEK USB Keyboard Hub> at usbus2 (disconnected)
ukbd0: at uhub4, port 3, addr 3 (disconnected)
ukbd0: detached
uhid0: at uhub4, port 3, addr 3 (disconnected)
uhid0: detached
uhub4: detached
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 01 12 6e 30 00 01 00 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 01 12 6e 30 00 01 00 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 01 13 89 c8 00 01 00 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
(da0:mpt0:0:1:0): WRITE(10). CDB: 2a 00 01 19 0f 20 00 01 00 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:44,9d (Vendor Specific ASCQ)
(da0:mpt0:0:1:0): Retrying command (per sense data)
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done

Syncing disks, vnodes remaining... Waiting (max 60 seconds) for system process `syncer' to stop... 0 0 0 0 done
All buffers synced.
Uptime: 18d9h31m1s
Rebooting...
cpu_reset: Stopping other CPUs
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p7 #0: Tue Dec 18 08:24:48 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC i386
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.09-MHz 686-class CPU)
  Origin="GenuineIntel"  Id=0xf27  Family=0xf  Model=0x2  Stepping=7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x400<CNXT-ID>
real memory  = 4294967296 (4096 MB)
avail memory = 3528044544 (3364 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD          APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
SMP: AP CPU #1 Launched!
random: entropy device external interface
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xc1018c50, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel E7505 host to AGP bridge> on hostb0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> mem 0xe8000000-0xefffffff at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pcib3: failed to allocate initial I/O port window: 0x2000-0x2fff
pci3: <ACPI PCI bus> on pcib3
mpt0: <LSILogic 1030 Ultra4 Adapter> mem 0xd8210000-0xd821ffff,0xd8200000-0xd820ffff irq 26 at device 5.0 on pci3
mpt0: 0x100 bytes of rid 0x10 res 4 failed (0, 0xffffffffffffffff).
mpt0: MPI Version=1.2.9.0
mpt1: <LSILogic 1030 Ultra4 Adapter> mem 0xd8230000-0xd823ffff,0xd8220000-0xd822ffff irq 27 at device 5.1 on pci3
mpt1: 0x100 bytes of rid 0x10 res 4 failed (0, 0xffffffffffffffff).
mpt1: MPI Version=1.2.9.0
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1880-0x189f irq 16 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x18a0-0x18bf irq 19 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x18c0-0x18df irq 18 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xd8000c00-0xd8000fff irq 23 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <mass storage, SCSI> at device 0.0 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xd9000000-0xd9ffffff,0xf0000000-0xf7ffffff irq 22 at device 1.0 on pci5
vgapci0: Boot video device
pci5: <serial bus, FireWire> at device 2.0 (no driver attached)
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> port 0x3400-0x343f mem 0xd8320000-0xd833ffff irq 16 at device 3.0 on pci5
em0: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x1840-0x187f mem 0xd8000800-0xd80009ff,0xd8000400-0xd80004ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1981A AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd2fff,0xd3000-0xd47ff,0xd4800-0xd87ff,0xde000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on isa0
ZFS NOTICE: KSTACK_PAGES is 2 which could result in stack overflow panic!
Please consider adding 'options KSTACK_PAGES=4' to your kernel config
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ata0: DMA limited to UDMA33, controller found non-ATA66 cable
uhub0: 6 ports with 6 removable, self powered
ada0 at ata0 bus 0 scbus2 target 0 lun 0
ada0: <ST380021A 3.19> ATA-5 device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors)
da0 at mpt0 bus 0 scbus0 target 1 lun 0
da0: <FUJITSU MAX3036NP 5D03> Fixed Direct Access SCSI-3 device
da0: [_SERIAL_NUMBER_XXXXXXXXX]
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit)
da0: Command Queueing enabled
da0: 34732MB (71132959 512 byte sectors)
cd0 at ata1 bus 0 scbus3 target 0 lun 0
cd0: <ATAPI DVD DC 16X8X5 100> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from zfs:zroot/ROOT/default []...
(da0:mpt0:0:1:0): READ(10). CDB: 28 00 00 40 bc 28 00 00 80 00
(da0:mpt0:0:1:0): CAM status: SCSI Status Error
(da0:mpt0:0:1:0): SCSI status: Check Condition
(da0:mpt0:0:1:0): SCSI sense: ABORTED COMMAND asc:48,0 (Initiator detected error message received)
(da0:mpt0:0:1:0): Retrying command (per sense data)
random: unblocking device.
em0: link state changed to UP