Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-21 19:49:26
From: gregf
Description: freebsd amd fx 8300 12-stable
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-STABLE r342285 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko Module mmc/mmcsd failed to register: 17 CPU: AMD FX(tm)-8320 Eight-Core Processor (3511.80-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x600f20 Family=0x15 Model=0x2 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1ebbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,TCE,NodeId,TBM,Topology,PCXC,PNXC> Structured Extended Features=0x8<BMI1> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=65536 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16504131584 (15739 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) random: unblocking device. Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20181213/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard Launching APs: 1 4 5 3 2 7 6 Timecounter "TSC-low" frequency 1755898417 Hz quality 1000 random: entropy device external interface 000.000017 [4164] netmap_init netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff811011c0, 0) error 19 kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) AMD-Vi: IVRS Info VAsize = 64 PAsize = 52 GVAsize = 0 flags:0 cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 54 at device 11.0 on pci0 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd01fffff,0xfea00000-0xfea3ffff irq 32 at device 0.0 on pci3 vgapci0: Boot video device hdac0: <ATI (0xaaf0) HDA Controller> mem 0xfea60000-0xfea63fff irq 33 at device 0.1 on pci3 pcib4: <ACPI PCI-PCI bridge> irq 54 at device 13.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ahci0: <AMD SB7x0/SB8x0/SB9x0 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfeb0b000-0xfeb0b3ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported ahci0: quirks=0x22000<ATI_PMP_BUG,1MSI> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 20 at device 19.0 on pci0 usbus2 on ohci1 usbus2: 12Mbps Full Speed USB v1.0 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 21 at device 19.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci1 usbus3: 480Mbps High Speed USB v2.0 hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci5: <ACPI PCI bus> on pcib5 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0 usbus4 on ohci2 usbus4: 12Mbps Full Speed USB v1.0 pcib6: <ACPI PCI-PCI bridge> at device 21.0 on pci0 pci6: <ACPI PCI bus> on pcib6 ahci1: <ASMedia ASM1062 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xfe900000-0xfe9001ff irq 20 at device 0.0 on pci6 ahci1: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported ahci1: quirks=0xc00000<NOCCS,NOAUX> ahcich6: <AHCI channel> at channel 0 on ahci1 ahcich7: <AHCI channel> at channel 1 on ahci1 pcib7: <ACPI PCI-PCI bridge> at device 21.1 on pci0 pci7: <ACPI PCI bus> on pcib7 xhci0: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe800000-0xfe807fff irq 21 at device 0.0 on pci7 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table usbus5 on xhci0 usbus5: 5.0Gbps Super Speed USB v3.0 pcib8: <ACPI PCI-PCI bridge> at device 21.2 on pci0 pci8: <ACPI PCI bus> on pcib8 xhci1: <ASMedia ASM1042A USB 3.0 controller> mem 0xfe700000-0xfe707fff irq 22 at device 0.0 on pci8 xhci1: 32 bytes context size, 64-bit DMA xhci1: Unable to map MSI-X table usbus6 on xhci1 usbus6: 5.0Gbps Super Speed USB v3.0 pcib9: <ACPI PCI-PCI bridge> at device 21.3 on pci0 pci9: <ACPI PCI bus> on pcib9 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xc000-0xc0ff mem 0xd0304000-0xd0304fff,0xd0300000-0xd0303fff irq 23 at device 0.0 on pci9 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 22 at device 22.0 on pci0 usbus7 on ohci3 usbus7: 12Mbps Full Speed USB v1.0 ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 23 at device 22.2 on pci0 usbus8: EHCI version 1.0 usbus8 on ehci2 usbus8: 480Mbps High Speed USB v2.0 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ivhd0: <AMD-Vi/IOMMU ivhd> on acpi0 ivhd0: Flag:3e<PassPW,ResPassPW,Isoc,IotlbSup,Coherent> ivhd0: Features(type:0x10) HATS = 0 GATS = 0 MsiNumPPR = 0 PNBanks= 0 PNCounters= 0 ivhd0: max PASID = 0 GLXSup = 0 Feature:0 ivhd0: supported paging level:7, will use only: 4 ivhd0: device range: 0x0 - 0x900 ivhd0: device [0xa0 - 0xa0]config:d7<INIT,ExtInt,NMI,LINT0> ivhd0: PCI cap 0x10b540f@0x40 feature:1<IOTLB> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 pcm2: <ATI R6xx (HDMI)> at nid 7 on hdaa0 pcm3: <ATI R6xx (HDMI)> at nid 9 on hdaa0 pcm4: <ATI R6xx (HDMI)> at nid 11 on hdaa0 pcm5: <ATI R6xx (HDMI)> at nid 13 on hdaa0 hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1 pcm6: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 pcm7: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1 pcm8: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1 pcm9: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1 ugen7.1: <ATI OHCI root HUB> at usbus7 ugen6.1: <0x1b21 XHCI root HUB> at usbus6 ugen3.1: <ATI EHCI root HUB> at usbus3 ugen0.1: <ATI OHCI root HUB> at usbus0 ugen5.1: <0x1b21 XHCI root HUB> at usbus5 ugen1.1: <ATI EHCI root HUB> at usbus1 ugen8.1: <ATI EHCI root HUB> at usbus8 ugen4.1: <ATI OHCI root HUB> at usbus4 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen2.1: <ATI OHCI root HUB> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub4: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus6 uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub6: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus5 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Samsung SSD 850 EVO 250GB EMT02B6Q> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 238475MB (488397168 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 ada1: <KINGSTON SUV400S37240G 0C3G37R5> ACS-4 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 228936MB (468862128 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus8 usbus7 usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub1: 2 ports with 2 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub8: 5 ports with 5 removable, self powered uhub5: 5 ports with 5 removable, self powered uhub6: 4 ports with 4 removable, self powered uhub4: 4 ports with 4 removable, self powered Root mount waiting for: usbus8 usbus5 usbus3 usbus1 uhub7: 4 ports with 4 removable, self powered ugen5.2: <asmedia ASMT1153e> at usbus5 umass0 on uhub6 umass0: <asmedia ASMT1153e, class 0/0, rev 3.00/1.00, addr 1> on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:5:0: Attached to scbus5 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: <asmedia ASMT1153e 0> Fixed Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXX] da0: 400.000MB/s transfers da0: 1001562MB (2051200368 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> uhub3: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered ugen5.3: <CYKB23 USB Keyboard> at usbus5 ukbd0 on uhub6 ukbd0: <CYKB23 USB Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus5 kbd2 at ukbd0 Root mount waiting for: usbus1 ugen1.2: <vendor 0x046d Logitech Webcam C930e> at usbus1 GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: software ugen0.2: <Primax Kensington Eagle Trackball> at usbus0 [drm] amdgpu kernel modesetting enabled. drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io [drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1043:0x04C2 0xEF). [drm] register mmio base: 0xFEA00000 [drm] register mmio size: 262144 [drm] PCI I/O BAR is not found. [drm] probing gen 2 caps for device 1002:5a1f = 33ed02/0 [drm] probing mlw for device 1002:67df = 440903 [drm] UVD is enabled in VM mode [drm] UVD ENC is enabled in VM mode [drm] VCE enabled in VM mode pci_is_thunderbolt_attached not implemented -- see your local kernel hacker ATOM BIOS: 115-C940PI0-100 [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mc.bin amdgpu_device_resize_fb_bar not implemented -- see your local kernel hacker drmn0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used) drmn0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF Successfully added WC MTRR for [0xc0000000-0xcfffffff]: 0; [drm] Detected VRAM RAM=4096M, BAR=256M [drm] RAM width 256bits GDDR5 [TTM] Zone kernel: Available graphics memory: 8312530 kiB [TTM] Zone dma32: Available graphics memory: 2097152 kiB [TTM] Initializing pool allocator [drm] amdgpu: 4096M of VRAM memory ready [drm] amdgpu: 4096M of GTT memory ready. i_size_write unimplemented [drm] GART: num cpu pages 65536, num gpu pages 65536 [drm] PCIE GART of 256M enabled (table at 0x000000F400040000). [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. [drm] Connector DP-1: get mode from tunables: [drm] - kern.vt.fb.modes.DP-1 [drm] - kern.vt.fb.default_mode [drm] Connector HDMI-A-1: get mode from tunables: [drm] - kern.vt.fb.modes.HDMI-A-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-1: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-1 [drm] - kern.vt.fb.default_mode [drm] Connector DVI-D-2: get mode from tunables: [drm] - kern.vt.fb.modes.DVI-D-2 [drm] - kern.vt.fb.default_mode [drm] AMDGPU Display Connectors [drm] Connector 0: [drm] DP-1 [drm] HPD6 [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY2 [drm] Connector 1: [drm] HDMI-A-1 [drm] HPD4 [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [drm] Encoders: [drm] DFP2: INTERNAL_UNIPHY2 [drm] Connector 2: [drm] DVI-D-1 [drm] HPD5 [drm] DDC: 0x4878 0x4878 0x4879 0x4879 0x487a 0x487a 0x487b 0x487b [drm] Encoders: [drm] DFP3: INTERNAL_UNIPHY1 [drm] Connector 3: [drm] DVI-D-2 [drm] HPD3 [drm] DDC: 0x487c 0x487c 0x487d 0x487d 0x487e 0x487e 0x487f 0x487f [drm] Encoders: [drm] DFP4: INTERNAL_UNIPHY drmn0: successfully loaded firmware image with name: amdgpu/polaris10_pfp_2.bin drmn0: successfully loaded firmware image with name: amdgpu/polaris10_me_2.bin drmn0: successfully loaded firmware image with name: amdgpu/polaris10_ce_2.bin [drm] Chained IB support enabled! drmn0: successfully loaded firmware image with name: amdgpu/polaris10_rlc.bin drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec_2.bin drmn0: successfully loaded firmware image with name: amdgpu/polaris10_mec2_2.bin sched_setscheduler not implemented -- see your local kernel hacker i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma.bin drmn0: successfully loaded firmware image with name: amdgpu/polaris10_sdma1.bin i_size_write unimplemented i_size_write unimplemented drmn0: successfully loaded firmware image with name: amdgpu/polaris10_uvd.bin [drm] Found UVD firmware Version: 1.130 Family ID: 16 i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented drmn0: successfully loaded firmware image with name: amdgpu/polaris10_vce.bin [drm] Found VCE firmware Version: 53.26 Binary ID: 3 i_size_write unimplemented i_size_write unimplemented i_size_write unimplemented drmn0: successfully loaded firmware image with name: amdgpu/polaris10_k_smc.bin pm_runtime_mark_last_busy not implemented -- see your local kernel hacker [drm] UVD and UVD ENC initialized successfully. [drm] VCE initialized successfully. __pm_runtime_resume not implemented -- see your local kernel hacker pm_runtime_mark_last_busy not implemented -- see your local kernel hacker __pm_runtime_suspend not implemented -- see your local kernel hacker [drm] fb mappable at 0xC0568000 [drm] vram apper at 0xC0000000 [drm] size 8294400 [drm] fb depth is 24 [drm] pitch is 7680 VT: Replacing driver "vga" with new "fb". start FB_INFO: type=11 height=1024 width=1280 depth=32 cmsize=16 size=8294400 pbase=0xc0568000 vbase=0xfffff800c0568000 name=drmn0 flags=0x0 stride=7680 bpp=32 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000 end FB_INFO drmn0: fb0: amdgpudrmfb frame buffer device i_size_write unimplemented [drm] Initialized amdgpu 3.23.0 20150101 for drmn0 on minor 0 __pm_runtime_resume not implemented -- see your local kernel hacker pm_runtime_mark_last_busy not implemented -- see your local kernel hacker lo0: link state changed to UP __pm_runtime_suspend not implemented -- see your local kernel hacker re0: link state changed to DOWN intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 re0: link state changed to UP ums0 on uhub5 ums0: <Primax Kensington Eagle Trackball, class 0/0, rev 2.00/6.00, addr 2> on usbus0 ums0: 3 buttons and [XYZT] coordinates ID=0 ums1 on uhub6 ums1: <CYKB23 USB Keyboard, class 0/0, rev 1.10/1.01, addr 2> on usbus5 uaudio0 on uhub3 uaudio0: <vendor 0x046d Logitech Webcam C930e, class 239/2, rev 2.00/0.13, addr 2> on usbus1 uaudio0: No playback. uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: Record: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: Record: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: Record: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer. uaudio0: No MIDI sequencer. pcm10: <USB audio> on uaudio0 uaudio0: No HID volume keys found. WARNING: attempt to domain_add(bluetooth) after domainfinalize() Security policy loaded: MAC/ntpd (mac_ntpd) __pm_runtime_resume not implemented -- see your local kernel hacker pm_runtime_mark_last_busy not implemented -- see your local kernel hacker __pm_runtime_suspend not implemented -- see your local kernel hacker __pm_runtime_resume not implemented -- see your local kernel hacker pm_runtime_mark_last_busy not implemented -- see your local kernel hacker __pm_runtime_suspend not implemented -- see your local kernel hacker