Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2018-12-24 17:46:54
From: tingo
Description: FreeBSD/amd64 on ASRock M3A UCC
re0: link state changed to DOWN re0: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done All buffers synced. Uptime: 9m3s umass0: detached ugen4.2: <SanDisk Cruzer Blade> at usbus4 umass0 on uhub4 umass0: <SanDisk Cruzer Blade, class 0/0, rev 2.10/1.00, addr 2> on usbus4 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:5:0: Attached to scbus5 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 3 more tries remain (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 2 more tries remain (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 1 more tries remain (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Retrying command, 0 more tries remain (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an error (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted umass0: detached ukbd0: detached ums0: detached re0: link state changed to DOWN ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: AMD Sempron(tm) 145 Processor (2792.50-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x100f63 Family=0x10 Model=0x6 Stepping=3 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37fd<LAHF,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant real memory = 8589934592 (8192 MB) avail memory = 8281165824 (7897 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <082611 APIC1651> random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 on motherboard Timecounter "TSC-low" frequency 1396251644 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <082611 RSDT1651> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 18 at device 0.0 on pci1 vgapci0: Boot video device pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfafff000-0xfaffffff,0xfaff8000-0xfaffbfff irq 17 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ahci0: <AMD SB600 AHCI SATA controller> port 0xc000-0xc007,0xb000-0xb003,0xa000-0xa007,0x9000-0x9003,0x8000-0x800f mem 0xfbfffc00-0xfbffffff irq 22 at device 18.0 on pci0 ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported ahci0: quirks=0x7000<NOMSI,ATI_PMP_BUG,MAXIO_64K> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ohci0: <OHCI (generic) USB controller> mem 0xfbffe000-0xfbffefff irq 16 at device 19.0 on pci0 usbus0 on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfbffd000-0xfbffdfff irq 17 at device 19.1 on pci0 usbus1 on ohci1 ohci2: <OHCI (generic) USB controller> mem 0xfbffc000-0xfbffcfff irq 18 at device 19.2 on pci0 usbus2 on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfbffb000-0xfbffbfff irq 17 at device 19.3 on pci0 usbus3 on ohci3 ohci4: <OHCI (generic) USB controller> mem 0xfbffa000-0xfbffafff irq 18 at device 19.4 on pci0 usbus4 on ohci4 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbfff800-0xfbfff8ff irq 19 at device 19.5 on pci0 ehci0: AMD SB600/700 quirk applied usbus5: EHCI version 1.0 usbus5 on ehci0 atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 hdac0: <ATI SB600 HDA Controller> mem 0xfbff4000-0xfbff7fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 5.0 on pci3 pci4: <PCI bus> on pcib4 pci4: <multimedia, video> at device 8.0 (no driver attached) pci4: <multimedia, video> at device 9.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection> port 0xd800-0xd83f mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 22 at device 7.0 on pci3 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Power Button> on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec hdacc0: <VIA VT1708S_4 HDA CODEC> at cad 0 on hdac0 hdaa0: <VIA VT1708S_4 Audio Function Group> at nid 1 on hdacc0 hdaa0: No presence detection support at nid 29 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 pcm0: <VIA VT1708S_4 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,31,30,27 on hdaa0 ugen1.1: <ATI OHCI root HUB> at usbus1 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI OHCI root HUB> at usbus2 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <ATI OHCI root HUB> at usbus3 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen0.1: <ATI OHCI root HUB> at usbus0 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 ugen4.1: <ATI OHCI root HUB> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI EHCI root HUB> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 (aprobe3:ahcich3:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 (aprobe3:ahcich3:0:15:0): CAM status: Command timeout (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted (aprobe3:ahcich3:0:15:0): NOP FLUSHQUEUE. ACB: 00 00 00 00 00 00 00 00 00 00 00 00 (aprobe3:ahcich3:0:15:0): CAM status: Command timeout (aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 ada0: <KINGSTON SA400S37120G SBFKB1E1> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) Trying to mount root from ufs:/dev/ada0p2 [rw]... lo0: link state changed to UP re0: link state changed to DOWN uhub5: 10 ports with 10 removable, self powered ugen1.2: <CHESEN PS2 to USB Converter> at usbus1 ukbd0 on uhub0 ukbd0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus1 kbd2 at ukbd0 re0: link state changed to UP intsmb0: <AMD SB600/7xx/8xx/9xx SMBus Controller> port 0xb00-0xb0f at device 20.0 on pci0 intsmb0: intr SMI enabled revision 0 intsmb0: using polling mode when configured interrupt is SMI smbus0: <System Management Bus> on intsmb0 ums0 on uhub0 ums0: <CHESEN PS2 to USB Converter, class 0/0, rev 1.10/0.10, addr 2> on usbus1 ums0: 5 buttons and [XYZ] coordinates ID=1