Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2018-12-30 21:00:26
From: nullnilaki
Description: NetBSD/macppc 8.0 on Power Mac G4 (Mirrored Drive Doors)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
total memory = 256 MB
avail memory = 234 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 4 CPUs and 64 interrupt sources.
bootpath: /pci@f4000000/ata-6@d/disk@0:2/netbsd
mainbus0 (root)
cpu0 at mainbus0: 7455 (Revision 2.1), ID 0 (primary)
cpu0: 1000.00 MHz, 256KB L2 cache no parity parity enabled, 1MB no-parity L3 cache (DDR SRAM) at 4:1 ratio
cpu1 at mainbus0: ID 1
cpu1: processor off-line; multiprocessor support not present in kernel
memory0 at mainbus0: len=512
spdmem0 at memory0
spdmem0: DDR SDRAM, no parity or ECC, 256MB, 333MHz (PC-2700)
spdmem0: 13 rows, 10 cols, 1 ranks, 4 banks/chip, 6.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
uni_n0 at mainbus0 address 0xf8000000
ki2c0 at uni_n0 address 0xf8001000
iic1 at ki2c0: I2C bus
dbcool0 at ki2c0
dbcool0: ADM1030 dBCool(tm) Controller (rev 0x0083)
i2c-hwclock at ki2c0 address 0xca not configured
temp-monitor at ki2c0 address 0x92 not configured
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth AGP Bridge (rev. 0x00)
genfb0 at pci0 dev 16 function 0found EDID property...
: ATI Technologies Radeon 9000/PRO If (rev. 0x00)
genfb0: framebuffer at 0x9c008000, size 1280x1024, depth 8, stride 1280
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
uninorth1 at mainbus0
pci1 at uninorth1 bus 0
pci1: i/o space, memory space enabled
pchb1 at pci1 dev 11 function 0
pchb1: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
ahc0 at pci1 dev 18 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc0: interrupting at irq 52
ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
Alteon ACEnic 1000baseSX Ethernet (ethernet network, revision 0x01) at pci1 dev 21 function 0 not configured
obio0 at pci1 dev 23 function 0: addr 0x80000000
obio0: enabling KeyLargo internal modem
zsc0 at obio0 irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
snapper0 at obio0 offset 0x10000: irq 30,1,2
pmu0 at obio0 offset 0x16000 irq 47:  rev. 12
pmu0: initializing IIC bus
pmu0: initializing RTC
pmu0: power-mgt not configured
ki2c1 at obio0
iic2 at ki2c1: I2C bus
deq0 at ki2c1 Apple Digital Equalizer, addr 0x6a
wdc0 at obio0 offset 0x1f000 irq 19, level triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x20000 irq 20, level triggered: DMA transfer
atabus1 at wdc1 channel 0
snapper0: codec: TAS3004
audio0 at snapper0: full duplex, playback, capture, mmap
snapper0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
snapper0: Latency: 256 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
ohci0 at pci1 dev 24 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci0: interrupting at irq 27
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci1 dev 25 function 0: Apple Computer KeyLargo USB Controller (rev. 0x00)
ohci1: interrupting at irq 28
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
uninorth2 at mainbus0
pci2 at uninorth2 bus 0
pci2: i/o space, memory space enabled
pchb2 at pci2 dev 11 function 0
pchb2: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
wdc2 at pci2 dev 13 function 0: interrupting at irq 39
atabus2 at wdc2 channel 0
fwohci0 at pci2 dev 14 function 0: Apple Computer UniNorth Firewire (rev. 0x01)
fwohci0: interrupting at irq 40
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 xx:xx:xx:xx:xx:xx:00:70
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
gem0 at pci2 dev 15 function 0: Apple Computer GMAC Ethernet (rev. 0x00)
gem0: interrupting at irq 41
brgphy0 at gem0 phy 0: BCM5421 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
gem0: Ethernet address xx:xx:xx:xx:xx:xx, 10KB RX fifo, 4KB TX fifo
vmmask 73be0000 schedmask 7ffe0000 highmask 7ffe0000
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mftb" frequency 41657867 Hz quality 100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: Apple Computer (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: Apple Computer (0x106b) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW  DVR-104, MBGDC181837WL, A227> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: FujitsuTakamisawaComponent (0x430) USBkeyboard (0x09), rev 1.10/1.01, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
wd0 at atabus2 drive 0
wd0: <IBM-IC35L080AVVA07-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc2:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs