Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2018-12-30 23:02:39
From: Vladimir Botka (vlado)
Description: HummingBoard-i2eX FreeBSD-11.2
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0 r335510: Fri Jun 22 02:26:28 UTC 2018
    [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/arm.armv6/usr/src/sys/IMX6 arm
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT: init without driver.
CPU: ARM Cortex-A9 r2p10 (ECO: 0x00000000)
CPU Features: 
  Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk
Optional instructions: 
  UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:2 LoUIS:2 
Cache level 1:
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 1073741824 (1024 MB)
avail memory = 1039851520 (991 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 46,47,48 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 44,45 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 9 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: Warning: L2 Cache should not already be active; trying to de-activate and re-initialize...
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 160
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 27,28 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 29,30 on simplebus1
gpiobus1: <GPIO bus> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 31,32 on simplebus1
gpiobus2: <GPIO bus> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 33,34 on simplebus1
gpiobus3: <GPIO bus> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 35,36 on simplebus1
gpiobus4: <GPIO bus> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 37,38 on simplebus1
gpiobus5: <GPIO bus> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 39,40 on simplebus1
gpiobus6: <GPIO bus> on gpio6
imx_epit0: <i.MX EPIT timer> mem 0x20d0000-0x20d3fff irq 52 on simplebus1
Timecounter "EPIT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 8 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
imx_usbmisc0: <i.MX USB Misc Control> mem 0x2184800-0x21849ff on simplebus3
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 5 on simplebus0
hdmi0: HDMI controller 13:0a:a0:c1
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
gpioc0: <GPIO controller> on gpio0
gpioc1: <GPIO controller> on gpio1
gpioc2: <GPIO controller> on gpio2
gpioc3: <GPIO controller> on gpio3
gpioc4: <GPIO controller> on gpio4
gpioc5: <GPIO controller> on gpio5
gpioc6: <GPIO controller> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 42 on simplebus1
snvs0: <i.MX6 SNVS RTC> mem 0x20cc000-0x20cffff on simplebus1
snvs0: registered as a time-of-day clock, resolution 0.000030s
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0: stop timeout
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: [_MAC_XXXXXXXXXX]
sdhci_fsl0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
mmc0: <MMC/SD bus> on sdhci_fsl0
sdhci_fsl1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
mmc1: <MMC/SD bus> on sdhci_fsl1
imx_i2c0: <Freescale i.MX I2C> mem 0x21a0000-0x21a3fff irq 86 on simplebus3
imx_i2c1: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
uart1: <Freescale i.MX UART> mem 0x21f0000-0x21f3fff irq 95 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 12,13 on simplebus0
ahci0: <i.MX6 Integrated AHCI controller> mem 0x2200000-0x2203fff irq 14 on simplebus0
ahci0: AHCI v1.30 with 1 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmc0: No compatible cards found on bus
mmcsd0: 8GB <SDHC SL08G 8.0 SN 28E55BEB MFG 11/2014 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
iicbus0: <OFW I2C bus> on imx_i2c0
iic0: <I2C generic I/O> on iicbus0
iicbus0: <unknown card> at addr 0xd0
iicbus0: <unknown card> at addr 0x14
iicbus1: <OFW I2C bus> on imx_i2c1
iic1: <I2C generic I/O> on iicbus1
hdmi0: reading EDID from iicbus1, addr 50
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SMS200S360G 541ABBF0> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 57241MB (117231408 512 byte sectors)
fbd0 on fb0
VT: initialize with new VT driver "fb".
Release APs
random: unblocking device.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
Warning: bad time from time-of-day clock, system time will not be set accurately
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
ugen1.2: <vendor 0x04b4 USB2.0 Hub> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x04b4 USB2.0 Hub, class 9/0, rev 2.00/32.99, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
ffec0: link state changed to DOWN
ugen1.3: <USB Device USB 2.0 Hub> at usbus1
uhub3 on uhub2
uhub3: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 3> on usbus1
uhub3: 4 ports with 4 removable, self powered
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus1
kbd1 at ukbd0
uhid0 on uhub3
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus1
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
ukbd0: at uhub3, port 4, addr 4 (disconnected)
ukbd0: detached
ums0: at uhub3, port 4, addr 4 (disconnected)
ums0: detached
uhid0: at uhub3, port 4, addr 4 (disconnected)
uhid0: detached
ffec0: link state changed to UP
ugen1.4: <Logitech USB Receiver> at usbus1 (disconnected)
ugen1.4: <Logitech USB Receiver> at usbus1
ukbd0 on uhub3
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus1
kbd1 at ukbd0
ums0 on uhub3
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub3
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 4> on usbus1
ffec0: link state changed to DOWN
ffec0: link state changed to UP