Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2019-01-01 20:09:05
From: Vladimir Botka (vlado)
Description: Raspberry Pi 3 model B ver.2 FreeBSD 12.0-RELEASE r341666 GENERIC arm64
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE r341666 GENERIC arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1024x768
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 7ffe000 mode 2 pages 2
MAP 8007000 mode 2 pages 2
MAP 39f35000 mode 2 pages 1
MAP 39f3a000 mode 2 pages 1
MAP 3b347000 mode 2 pages 1
MAP 3f100000 mode 1 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 24 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 26 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 37 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 43,44 on simplebus0
usbus0 on bcm283x_dwcotg0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 46 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fbd0 on fb0
VT: Replacing driver "efifb" with new "fb".
fb0: 1024x768(1024x768@0,0) 24bpp
fb0: fbswap: 1, pitch 3072, base 0x3e9ba000, screen_size 2359296
pmu0: <Performance Monitoring Unit> irq 50 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led0> failed to map pin
gpioled0: <led1> failed to map pin
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
usbus0: 480Mbps High Speed USB v2.0
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
mmcsd0: 16GB <SDHC SU16G 8.0 SN 00736959 MFG 06/2013 by 3 SD> at mmc0 50.0MHz/4bit/65535-block
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
Release APs...done
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
 Instruction Set Attributes 0 = <CRC32>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <0>
      Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
      Memory Model Features 1 = <>
      Memory Model Features 2 = <32b CCIDX,48b VA>
             Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
             Debug Features 1 = <0>
         Auxiliary Features 0 = <0>
         Auxiliary Features 1 = <0>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
CPU  2: ARM Cortex-A53 r0p4 affinity:  2
CPU  3: ARM Cortex-A53 r0p4 affinity:  3
uhub0: 1 port with 1 removable, self powered
Warning: no time-of-day clock registered, system time will not be set accurately
ugen0.2: <vendor 0x0424 product 0x9514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x9514, class 9/0, rev 2.00/2.00, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 5 ports with 4 removable, self powered
ugen0.3: <vendor 0x0424 product 0xec00> at usbus0
smsc0 on uhub1
smsc0: <vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3> on usbus0
smsc0: chip 0xec00, rev. 0002
miibus0: <MII bus> on smsc0
smscphy0: <SMC LAN8700 10/100 interface> PHY 1 on miibus0
smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on smsc0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
lo0: link state changed to UP
uhub2: 4 ports with 4 removable, self powered
smsc0: chip 0xec00, rev. 0002
ue0: link state changed to DOWN
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ugen0.6: <Ralink 802.11 n WLAN> at usbus0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
run0 on uhub1
run0: <1.0> on usbus0
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address [_MAC_XXXXXXXXXX]
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
run0: firmware RT3071 ver. 0.33 loaded
wlan0: link state changed to UP
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
ugen0.4: <USB Device USB 2.0 Hub> at usbus0
uhub2 on uhub1
uhub2: <USB Device USB 2.0 Hub, class 9/0, rev 2.00/0.00, addr 4> on usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd0 on uhub2
ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
kbd1 at ukbd0
ums0 on uhub2
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ums0: 16 buttons and [XYZT] coordinates ID=2
uhid0 on uhub2
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 5> on usbus0
ugen0.4: <USB Device USB 2.0 Hub> at usbus0 (disconnected)
uhub2: at uhub1, port 2, addr 4 (disconnected)
ugen0.5: <Logitech USB Receiver> at usbus0 (disconnected)
ukbd0: at uhub2, port 2, addr 5 (disconnected)
ukbd0: detached
ums0: at uhub2, port 2, addr 5 (disconnected)
ums0: detached
uhid0: at uhub2, port 2, addr 5 (disconnected)
uhid0: detached
uhub2: detached
wlan0: link state changed to DOWN
wlan0: link state changed to UP