Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-01-02 11:43:20
From: ioh
Description: FreeBSD/amd64 on LENOVO 30B4S0NG00
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p7 #0: Tue Dec 18 08:29:33 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(efifb): resolution 1920x1200
CPU: Intel(R) Xeon(R) CPU E5-1603 v4 @ 2.80GHz (2793.59-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406f1 Family=0x6 Model=0x4f Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33139073024 (31603 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-S00 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1396797440 Hz quality 1000
Cuse v0.1.35 @ /dev/cuse
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.77 Tue Jul 10 21:54:30 PDT 2018
nexus0
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-S00> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> numa-domain 0 on acpi0
cpu1: <ACPI CPU> numa-domain 0 on acpi0
cpu2: <ACPI CPU> numa-domain 0 on acpi0
cpu3: <ACPI CPU> numa-domain 0 on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-0xfaffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff at device 0.0 numa-domain 0 on pci2
nvidia0: <NVS 310> numa-domain 0 on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
hdac0: <NVIDIA GF119 HDA Controller> mem 0xfb080000-0xfb083fff at device 0.1 numa-domain 0 on pci2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
vgapci1: <VGA-compatible display> port 0xd000-0xd07f mem 0xf8000000-0xf8ffffff,0xd8000000-0xdfffffff,0xe0000000-0xe1ffffff at device 0.0 numa-domain 0 on pci3
nvidia1: <NVS 310> numa-domain 0 on vgapci1
vgapci1: child nvidia1 requested pci_enable_io
vgapci1: child nvidia1 requested pci_enable_io
hdac1: <NVIDIA GF119 HDA Controller> mem 0xf9080000-0xf9083fff at device 0.1 numa-domain 0 on pci3
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0xf130-0xf137,0xf120-0xf123,0xf110-0xf117,0xf100-0xf103,0xf040-0xf05f mem 0xfb13c000-0xfb13c7ff at device 17.4 numa-domain 0 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0xfb120000-0xfb12ffff at device 20.0 numa-domain 0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0 numa-domain 0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
atapci0: <Intel ATA controller> port 0xf0f0-0xf0f7,0xf0e0-0xf0e3,0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0bf at device 22.2 numa-domain 0 on pci1
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci1: <simple comms, UART> at device 22.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf020-0xf03f mem 0xfb100000-0xfb11ffff,0xfb139000-0xfb139fff at device 25.0 numa-domain 0 on pci1
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xfb138000-0xfb1383ff at device 26.0 numa-domain 0 on pci1
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac2: <Intel Wellsburg HDA Controller> mem 0xfb130000-0xfb133fff at device 27.0 numa-domain 0 on pci1
pcib4: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci1
pcib4: [GIANT-LOCKED]
pcib5: <ACPI PCI-PCI bridge> at device 28.1 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4
pci5: <ACPI PCI bus> numa-domain 0 on pcib6
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xfb137000-0xfb1373ff at device 29.0 numa-domain 0 on pci1
usbus2: EHCI version 1.0
usbus2 numa-domain 0 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf070-0xf077,0xf060-0xf063,0xf000-0xf01f mem 0xfb136000-0xfb1367ff at device 31.2 numa-domain 0 on pci1
ahci1: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu0
est1: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu1
est2: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu2
est3: <Enhanced SpeedStep Frequency Control> numa-domain 0 on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm1: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 6 on hdaa0
hdacc1: <NVIDIA (0x001c) HDA CODEC> at cad 0 on hdac1
hdaa1: <NVIDIA (0x001c) Audio Function Group> at nid 1 on hdacc1
pcm2: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm3: <NVIDIA (0x001c) (HDMI/DP 8ch)> at nid 6 on hdaa1
hdacc2: <Realtek ALC662 HDA CODEC> at cad 0 on hdac2
hdaa2: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc2
pcm4: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,26 on hdaa2
pcm5: <Realtek ALC662 (Analog)> at nid 21 and 25 on hdaa2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: 21 ports with 21 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ugen0.2: <VIA Labs, Inc. USB Hub> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <VIA Labs, Inc. USB Hub, class 9/0, rev 2.10/53.80, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus6 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SD7SB6S256G1001 X3561001> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 244198MB (500118192 512 byte sectors)
cd0 at ahcich4 bus 0 scbus4 target 0 lun 0
cd0: <HL-DT-ST DVDROM DH60N 1.02> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Trying to mount root from zfs:zroot/ROOT/default []...
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub4 numa-domain 0 on uhub0
uhub4: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub5 numa-domain 0 on uhub2
uhub5: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus2
Root mount waiting for: usbus2 usbus1 usbus0
uhub3: 4 ports with 4 removable, self powered
uhub4: 6 ports with 6 removable, self powered
uhub5: 8 ports with 8 removable, self powered
ugen0.3: <Sennheiser Sennheiser SC230 for Lync> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Generic USB2.0-CRW> at usbus0
Root mount waiting for: usbus0
ugen0.5: <CHICONY HP Basic USB Keyboard> at usbus0
ukbd0 numa-domain 0 on uhub1
ukbd0: <CHICONY HP Basic USB Keyboard, class 0/0, rev 1.10/3.00, addr 4> on usbus0
kbd2 at ukbd0
ugen0.6: <Contour Design RollerMouse PRO2> at usbus0
Root mount waiting for: usbus0
ugen0.7: <VIA Labs, Inc. USB Hub> at usbus0
uhub6 numa-domain 0 on uhub1
uhub6: <VIA Labs, Inc. USB Hub, class 9/0, rev 3.00/53.85, addr 6> on usbus0
Root mount waiting for: usbus0
uhub6: 4 ports with 4 removable, self powered
random: unblocking device.
uaudio0 numa-domain 0 on uhub3
uaudio0: <Sennheiser Sennheiser SC230 for Lync, class 0/0, rev 2.00/1.15, addr 2> on usbus0
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 16000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 8000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 32000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 24000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No MIDI sequencer.
pcm6: <USB audio> numa-domain 0 on uaudio0
uaudio0: HID volume keys found.
ums0 numa-domain 0 on uhub1
ums0: <Contour Design RollerMouse PRO2, class 0/0, rev 1.10/2.02, addr 5> on usbus0
ums0: 7 buttons and [XYZ] coordinates ID=1
em0: link state changed to UP