Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-01-02 11:51:12
From: ioh
Description: FreeBSD/amd64 on Dell Inc. PowerEdge R630
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE #0: Wed Jul 4 07:55:57 CEST 2018
[_EMAIL_XXXXXXXXXXXXXX]:/usr/src/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz (1600.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7994392576 (7624 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC" frequency 1600035028 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4550, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
AVAGO MegaRAID SAS FreeBSD mrsas driver version:[_IP_XXXXXXX]-fbsd
mfi0: <Fury> port 0x2000-0x20ff mem 0x91d00000-0x91d0ffff,0x91c00000-0x91cfffff irq 26 at device 0.0 numa-domain 0 on pci2
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 240, limiting to 128
mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c00f0
mfi0: 891 (594468746s/0x0020/info) - Shutdown command received from host
mfi0: 892 (boot + 6s/0x0020/info) - Firmware initialization started (PCI ID 005f/1000/1f4b/1028)
mfi0: 893 (boot + 6s/0x0020/info) - Firmware version 4.270.01-8113
mfi0: 894 (boot + 8s/0x0020/info) - Package version[_IP_XXXXX]9
mfi0: 895 (boot + 8s/0x0020/info) - Board Revision A01
mfi0: 896 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 897 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff irq 40 at device 0.0 numa-domain 0 on pci4
bge0: APE FW version: NCSI v1.3.16.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff irq 44 at device 0.1 numa-domain 0 on pci4
bge1: APE FW version: NCSI v1.3.16.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.1 numa-domain 0 on pci1
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b30000-0x91b3ffff,0x91b40000-0x91b4ffff,0x91b50000-0x91b5ffff irq 41 at device 0.0 numa-domain 0 on pci5
bge2: APE FW version: NCSI v1.3.16.0
bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b00000-0x91b0ffff,0x91b10000-0x91b1ffff,0x91b20000-0x91b2ffff irq 45 at device 0.1 numa-domain 0 on pci5
bge3: APE FW version: NCSI v1.3.16.0
bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci1
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x91e01000-0x91e017ff irq 16 at device 17.4 numa-domain 0 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x91e03000-0x91e033ff irq 18 at device 26.0 numa-domain 0 on pci1
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1
pci7: <PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci1
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci11
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x91e02000-0x91e023ff irq 18 at device 29.0 numa-domain 0 on pci1
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x91e00000-0x91e007ff irq 16 at device 31.2 numa-domain 0 on pci1
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8800-0xcbfff,0xcc000-0xd37ff,0xed800-0xf17ff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 176600001000
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 176600001000
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est5 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfisyspd0 numa-domain 0 on mfi0
mfisyspd0: 286102MB (585937500 sectors) SYSPD volume (deviceid: 0)
mfisyspd0: SYSPD volume attached
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
mfisyspd1 numa-domain 0 on mfi0
mfisyspd1: 286102MB (585937500 sectors) SYSPD volume (deviceid: 1)
mfisyspd1: SYSPD volume attached
mfi0: 898 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=554a8020211dbe00,00uhub0: 00000000000000
mfi0: 899 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
cd0 at ahcich9 bus 0 scbus10 target 0 lun 0
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
uhub1: mfi0: cd0: <HL-DT-ST DVD-ROM DU90N D3B0> Removable CD-ROM SCSI device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
900 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000039618311f6a,000<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes0000000000000
mfi0: 901 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
)
mfi0: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
902 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000039618312166,0000000000000000
mfi0: ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
903 (boot + 26s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 904 (594465172s/0x0020/info) - Time established as 11/02/18 9:12:52; (26 seconds since power on)
mfi0: ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
905 (594465249s/0x0020/info) - Host driver is loaded and operational
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
Root mount waiting for: usbus1 usbus0
uhub2: 8 ports with 8 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub3
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
uhub4: 6 ports with 6 removable, self powered
random: unblocking device.
bge2: link state changed to DOWN
bge3: link state changed to DOWN
lagg0: link state changed to DOWN
bge2: link state changed to UP
lagg0: link state changed to UP
bge3: link state changed to UP
bge3: link state changed to DOWN
bge3: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 done
All buffers synced.
Uptime: 18m42s
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p4 #0: Thu Sep 27 08:16:24 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2603 v3 @ 1.60GHz (1600.03-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7994392576 (7624 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #5 Launched!
Timecounter "TSC" frequency 1600034016 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 47 at device 1.0 numa-domain 0 on pci1
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
AVAGO MegaRAID SAS FreeBSD mrsas driver version:[_IP_XXXXXXX]-fbsd
mfi0: <Fury> port 0x2000-0x20ff mem 0x91d00000-0x91d0ffff,0x91c00000-0x91cfffff irq 26 at device 0.0 numa-domain 0 on pci2
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 240, limiting to 128
mfi0: MaxCmd = 240, Drv MaxCmd = 128, MaxSgl = 70, state = 0xb73c00f0
mfi0: 906 (594466377s/0x0020/info) - Shutdown command received from host
mfi0: 907 (boot + 6s/0x0020/info) - Firmware initialization started (PCI ID 005f/1000/1f4b/1028)
mfi0: 908 (boot + 6s/0x0020/info) - Firmware version 4.270.01-8113
mfi0: 909 (boot + 8s/0x0020/info) - Package version[_IP_XXXXX]9
mfi0: 910 (boot + 8s/0x0020/info) - Board Revision A01
mfi0: 911 (boot + 14s/0x0004/info) - Enclosure PD 20(c None/p1) communication restored
mfi0: 912 (boot + 14s/0x0002/info) - Inserted: Encl PD 20
pcib3: <ACPI PCI-PCI bridge> irq 47 at device 2.0 numa-domain 0 on pci1
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 47 at device 3.0 numa-domain 0 on pci1
pci4: <ACPI PCI bus> numa-domain 0 on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a30000-0x91a3ffff,0x91a40000-0x91a4ffff,0x91a50000-0x91a5ffff irq 40 at device 0.0 numa-domain 0 on pci4
bge0: APE FW version: NCSI v1.3.16.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91a00000-0x91a0ffff,0x91a10000-0x91a1ffff,0x91a20000-0x91a2ffff irq 44 at device 0.1 numa-domain 0 on pci4
bge1: APE FW version: NCSI v1.3.16.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib5: <ACPI PCI-PCI bridge> irq 47 at device 3.1 numa-domain 0 on pci1
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
bge2: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b30000-0x91b3ffff,0x91b40000-0x91b4ffff,0x91b50000-0x91b5ffff irq 41 at device 0.0 numa-domain 0 on pci5
bge2: APE FW version: NCSI v1.3.16.0
bge2: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus2: <MII bus> numa-domain 0 on bge2
brgphy2: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus2
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge2: Using defaults for TSO: 65518/35/2048
bge2: Ethernet address: [_MAC_XXXXXXXXXX]
bge3: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x91b00000-0x91b0ffff,0x91b10000-0x91b1ffff,0x91b20000-0x91b2ffff irq 45 at device 0.1 numa-domain 0 on pci5
bge3: APE FW version: NCSI v1.3.16.0
bge3: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus3: <MII bus> numa-domain 0 on bge3
brgphy3: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus3
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge3: Using defaults for TSO: 65518/35/2048
bge3: Ethernet address: [_MAC_XXXXXXXXXX]
pcib6: <ACPI PCI-PCI bridge> irq 47 at device 3.2 numa-domain 0 on pci1
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
pci1: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x3078-0x307f,0x308c-0x308f,0x3070-0x3077,0x3088-0x308b,0x3040-0x305f mem 0x91e01000-0x91e017ff irq 16 at device 17.4 numa-domain 0 on pci1
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0x91e03000-0x91e033ff irq 18 at device 26.0 numa-domain 0 on pci1
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib7: <PCI-PCI bridge> irq 16 at device 28.0 numa-domain 0 on pci1
pci7: <PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci1
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> mem 0x90000000-0x90ffffff,0x91800000-0x91803fff,0x91000000-0x917fffff irq 19 at device 0.0 numa-domain 0 on pci11
vgapci0: Boot video device
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0x91e02000-0x91e023ff irq 18 at device 29.0 numa-domain 0 on pci1
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci1
isa0: <ISA bus> numa-domain 0 on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3020-0x303f mem 0x91e00000-0x91e007ff irq 16 at device 31.2 numa-domain 0 on pci1
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8800-0xcbfff,0xcc000-0xd37ff,0xed800-0xf17ff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 176600001000
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est3 attach returned 6
est4: <Enhanced SpeedStep Frequency Control> on cpu4
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est4 attach returned 6
est5: <Enhanced SpeedStep Frequency Control> on cpu5
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 173e00001000
device_attach: est5 attach returned 6
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
mfisyspd0 numa-domain 0 on mfi0
mfisyspd0: 286102MB (585937500 sectors) SYSPD volume (deviceid: 0)
mfisyspd0: SYSPD volume attached
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
mfisyspd1 numa-domain 0 on mfi0
mfisyspd1: 286102MB (585937500 sectors) SYSPD volume (deviceid: 1)
mfisyspd1: SYSPD volume attached
mfi0: 913 (boot + 14s/0x0002/info) - Inserted: PD 20(c None/p1) Info: enclPd=20, scsiType=d, portMap=00, sasAddr=554a8020211dbe00,00uhub0: 00000000000000
mfi0: 914 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0)
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
cd0 at ahcich9 bus 0 scbus10 target 0 lun 0
ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
uhub1: cd0: <HL-DT-ST DVD-ROM DU90N D3B0> Removable CD-ROM SCSI device
<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mfi0: ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0: [_SERIAL_NUMBER_XXXXXXXX]
cd0: 150.000MB/s transfers915 (boot + 14s/0x0002/info) - Inserted: PD 00(e0x20/s0) Info: enclPd=20, scsiType=0, portMap=01, sasAddr=5000039618311f6a,0000000000000000
mfi0: 916 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1)
(SATA 1.x, mfi0: UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
917 (boot + 14s/0x0002/info) - Inserted: PD 01(e0x20/s1) Info: enclPd=20, scsiType=0, portMap=00, sasAddr=5000039618312166,0000000000000000
ses1 at ahciem1 bus 0 scbus11 target 0 lun 0
mfi0: ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
918 (boot + 22s/0x0020/info) - Controller operating temperature within normal range, full operation restored
mfi0: 919 (594466402s/0x0020/info) - Time established as 11/02/18 9:33:22; (22 seconds since power on)
mfi0: 920 (594466469s/0x0020/info) - Host driver is loaded and operational
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus1 usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
Root mount waiting for: usbus1 usbus0
ugen0.2: <vendor 0x8087 product 0x800a> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x8002> at usbus1
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2> on usbus1
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub2
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
uhub4: 6 ports with 6 removable, self powered
random: unblocking device.
bge2: link state changed to DOWN
bge3: link state changed to DOWN
lagg0: link state changed to DOWN
bge2: link state changed to UP
lagg0: link state changed to UP
bge3: link state changed to UP
bge3: link state changed to DOWN