Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-01-04 18:05:32
From: nullnilaki
Description: NetBSD/sgimips current(20181231) on Sgi Personal IRIS 4D/25
Console DUART test			PASSED
Memory walking bit test			PASSED
Memory address uniqueness test		PASSED
Interrupt mask registers test		PASSED
Graphics subsystem test			PASSED



                           Starting up the system...

               To perform system maintenance instead, press <Esc>
dk1: err 0 on disk status check


System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor.  Type "exit" to return to the menu.
>> boot -f dksc(0,4,8)sash
dk4: err 0 on disk status check
couldn't load dksc(0,4,8)sash
>> hinv        
           Memory size: 48 Mbytes
Instruction cache size: 64 Kbytes
       Data cache size: 32 Kbytes
             CPU board: IP6 20 MHZ
         System option: Floating Point Processor

>> boot -f bootp()192.168.1.3:/tftpboot/netbsd
Obtaining /tftpboot/netbsd from server[_IP_XXXXXX]
2449712+0+82000 entry: 0x80002000
[   1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
[   1.0000000]     2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
[   1.0000000]     2018, 2019 The NetBSD Foundation, Inc.  All rights reserved.
[   1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[   1.0000000]     The Regents of the University of California.  All rights reserved.

[   1.0000000] NetBSD 8.99.30 (GENERIC32_IP12) #9: Fri Jan  4 17:00:48 UTC 2019
[   1.0000000] 	naruaki@localhost:/usr/obj.sgimips/sys/arch/sgimips/compile/GENERIC32_IP12
[   1.0000000] total memory = 49152 KB
[   1.0000000] (512 KB reserved for ARCS)
[   1.0000000] avail memory = 45084 KB
[   1.0000000] mainbus0 (root): SGI-IP6 [SGI, IP6], 1 processor
[   1.0000000] cpu0 at mainbus0: MIPS R3000 CPU (0x220) Rev. 2.0 with MIPS R3010 FPC Rev. 2.0
[   1.0000000] cpu0: 64KB/4B direct-mapped Instruction cache, 64 TLB entries
[   1.0000000] cpu0: 32KB/4B direct-mapped write-through Data cache
[   1.0000000] int0 at mainbus0 addr 0x1f980000
[   1.0000050] ctl0 at mainbus0 addr 0x1f800000
[   1.0000050] dpclock0 at mainbus0 addr 0x1fbc0000
[   1.0000050] scn0 at mainbus0 addr 0x1fb80004: scn2681, flags 1
[   1.0000050] oioc0 at mainbus0 addr 0x1f900000
[   1.0000050] oioc0: Old SGI IOC2
[   1.0000050] oioc0: 0x100008c<HIWAT=0xc,ID=0x0,BURST,COUNT=0x0,SCP=0x0,IOP=0x0>
[   1.0000050] oioc0: Burst DMA supported
[   1.0000050] oiocsc0 at oioc0: WD33C93A (10.0 MHz clock, PIO, SCSI ID 0)
[   1.0000050] scsibus0 at oiocsc0: 8 targets, 8 luns per target
[   1.0000050] le0 at oioc0: main memory used = 256 KB
[   1.0000050] le0: address [_MAC_XXXXXXXXXX]
[   1.0000050] le0: 128 receive buffers, 32 transmit buffers
[   1.2079803] scsibus0: waiting 2 seconds for devices to settle...
[   4.0578913] sd0 at scsibus0 target 4 lun 0: <IBM, DORS-32160, WA6A> disk fixed
[   4.2279000] sd0: 2015 MB, 6703 cyl, 5 head, 123 sec, 512 bytes/sect x 4127761 sectors
[   4.3281126] sd0: async, 8-bit transfers
[   5.1679846] boot device: <unknown>
[   5.2095080] root device: 
[   5.3888396] use one of: le0 sd0[a-p] halt reboot
[   5.4474247] root device: sd0a
[   6.2483600] dump device (default sd0b): 
[   6.4641326] file system (default generic): 
[   6.5602784] root on sd0a dumps on sd0b
[   6.9393865] Supported file systems: mfs ffs nfs procfs kernfs tmpfs ptyfs
[   7.0200571] no file system for sd0 (dev 0xa00)
[   7.0742237] cannot mount root, error = 79
[   7.1265024] root device (default sd0a):