Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-02-23 19:01:26
From: nullnilaki
Description: NetBSD/sparc64(8.0) on Sun Blade 2500 silver
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 8.0 (GENERIC) #0: Tue Jul 17 14:59:51 UTC 2018
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
total memory = 2048 MB
avail memory = 1992 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
mainbus0 (root): SUNW,Sun-Blade-2500-S (Sun Blade 2500): [_HOSTID_XXXXX]
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1600 MHz, CPU id 0
cpu0: manuf 3e, impl 16, mask 34
cpu0: system tick frequency 12 MHz
cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1600 MHz, CPU id 1
cpu1: manuf 3e, impl 16, mask 34
cpu1: system tick frequency 12 MHz
cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
memory-controller at mainbus0 not configured
memory-controller at mainbus0 not configured
schizo0 at mainbus0: addr 4000e600000: Tomatillo, version 4, ign 700, bus A 0 to 0
schizo0: pci0 at schizo0
pci0: i/o space, memory space enabled
bge0 at pci0 dev 3 function 0: Broadcom BCM5703 Gigabit Ethernet
bge0: interrupting at ivec 371c
bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address [_MAC_XXXXXXXXXX]
brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
mpt0 at pci0 dev 2 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08)
mpt0: interrupting at ivec 1f00
scsibus0 at mpt0: 16 targets, 8 luns per target
mpt1 at pci0 dev 2 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08)
mpt1: interrupting at ivec 1f01
scsibus1 at mpt1: 16 targets, 8 luns per target
ppm at mainbus0 not configured
schizo1 at mainbus0: addr 4000ef00000: Tomatillo, version 4, ign 740, bus B 0 to 0
schizo1: pci1 at schizo1
pci1: i/o space, memory space enabled
mpt2 at pci1 dev 4 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x07)
mpt2: applying 1030 quirk
mpt2: interrupting at ivec 1f69
scsibus2 at mpt2: 16 targets, 8 luns per target
mpt3 at pci1 dev 4 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x07)
mpt3: applying 1030 quirk
mpt3: interrupting at ivec 1f68
scsibus3 at mpt3: 16 targets, 8 luns per target
schizo2 at mainbus0: addr 4000f600000: Tomatillo, version 4, ign 780, bus A 0 to 1
schizo2: pci2 at schizo2
pci2: i/o space, memory space enabled
ebus0 at pci2 dev 7 function 0
ebus0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00
flashprom at ebus0 addr 0-fffff not configured
rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5823
pcfiic0 at ebus0 addr 320-321 ipl 2e
iic0 at pcfiic0: I2C bus
i2c-bridge at iic0 addr 0x09 not configured
gpio at iic0 addr 0x18 not configured
hardware-monitor at iic0 addr 0x29 not configured
dbcool0 at iic0 addr 0x2c
dbcool0: ADM1031 dBCool(tm) Controller (rev 0x0083)
dbcool1 at iic0 addr 0x2e
dbcool1: ADM1031 dBCool(tm) Controller (rev 0x0083)
gpio at iic0 addr 0x37 not configured
gpio at iic0 addr 0x4e not configured
seeprom0 at iic0 addr 0x50: audio-card-fru-prom: size 8192
seeprom1 at iic0 addr 0x51: motherboard-fru-prom: size 8192
seeprom2 at iic0 addr 0x54: scsi-backplane-fru-prom: size 8192
spdmem0 at iic0 addr 0x5d
spdmem0: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem0: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
spdmem1 at iic0 addr 0x5e
spdmem1: DDR SDRAM (registered), data ECC, 1GB, 286MHz (PC-2300)
spdmem1: 13 rows, 11 cols, 2 ranks, 4 banks/chip, 7.0ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7
spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing)
clock-generator at iic0 addr 0x69 not configured
power at ebus0 addr 800-82f ipl 20 not configured
com0 at ebus0 addr 3f8-3ff ipl 2c: ns16550a, working fifo
com0: console
com1 at ebus0 addr 2e8-2ef ipl 2c: ns16550a, working fifo
dma at ebus0 addr 0-ffff not configured
alipm0 at pci2 dev 6 function 0: 223KHz clock
iic1 at alipm0: I2C bus
card-reader at iic1 addr 0x20 not configured
autri0 at pci2 dev 8 function 0: Acer Labs M5451 AC-Link Controller Audio Device (rev. 0x02)
autri0: interrupting at ivec 7a4
autri0: ac97: Analog Devices AD1881A codec; headphone, Analog Devices Phat Stereo
audio0 at autri0: full duplex, playback, capture, mmap, independent
autri0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
autri0: Latency: 256 milliseconds
spkr0 at audio0: PC Speaker (synthesized)
midi0 at autri0: 4DWAVE MIDI UART
ohci0 at pci2 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ivec 7a7
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci2 dev 11 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ivec 7a6
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
aceride0 at pci2 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
aceride0: primary channel configured to native-PCI mode
aceride0: using ivec 1f98 for native-PCI interrupt
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to native-PCI mode
atabus1 at aceride0 channel 1
ppb0 at pci2 dev 4 function 0: Texas Instruments product ac23 (rev. 0x02)
pci3 at ppb0 bus 1
pci3: i/o space, memory space enabled
ohci2 at pci3 dev 8 function 0: NEC USB Host Controller (rev. 0x43)
ohci2: interrupting at ivec 794
ohci2: OHCI version 1.0
usb2 at ohci2: USB revision 1.0
ohci3 at pci3 dev 8 function 1: NEC USB Host Controller (rev. 0x43)
ohci3: interrupting at ivec 795
ohci3: OHCI version 1.0
usb3 at ohci3: USB revision 1.0
ehci0 at pci3 dev 8 function 2: NEC USB2 Host Controller (rev. 0x04)
ehci0: interrupting at ivec 796
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 3 ports each: ohci2 ohci3
usb4 at ehci0: USB revision 2.0
fwohci0 at pci3 dev 11 function 0: Texas Instruments TSB43AA23 IEEE 1394 Host Controller (rev. 0x00)
fwohci0: interrupting at ivec 797
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:d0:de
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppm at mainbus0 not configured
schizo3 at mainbus0: addr 4000ff00000: Tomatillo, version 4, ign 7c0, bus B 0 to 0
schizo3: pci4 at schizo3
pci4: i/o space, memory space enabled
wcfb0 at pci4 dev 2 function 0: 3D Labs WILDCAT 5110 (rev. 0x01)
wcfb1 at pci4 dev 2 function 1: 3D Labs WILDCAT 5110 (rev. 0x01)
i2c at mainbus0 not configured
pcons at mainbus0 not configured
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "tick-counter" frequency 1600000000 Hz quality 100
timecounter: Timecounter "stick-counter" frequency 12000000 Hz quality 200
No counter-timer -- using %stick at 12MHz as system clock.
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
scsibus2: waiting 2 seconds for devices to settle...
scsibus3: waiting 2 seconds for devices to settle...
uhub0 at usb0: Acer Labs (0x10b9) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: NEC (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb4: NEC (0x1033) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb1: Acer Labs (0x10b9) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb3: NEC (0x1033) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp CDW/DVD TS-H492C, , SI00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
sd0 at scsibus2 target 1 lun 0: <FUJITSU, MAP3367N SUN36G, 0401> disk fixed
sd0: 34732 MB, 24622 cyl, 27 head, 107 sec, 512 bytes/sect x 71132959 sectors
sd0: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/sparc64/8.0/modules