Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2019-03-02 00:39:22
From: unrelenting.technology
Description: FreeBSD/amd64 on an upgraded 2006 Apple Mac mini (Macmini1,1 with Core 2 Duo and Macmini2,1 firmware)
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #10 1486e524d01(master)-dirty: Sat Mar  2 00:29:58 MSK 2019
    [_EMAIL_XXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 7.0.1 (tags/RELEASE_701/final 349250) (based on LLVM 7.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1280x1024
CPU: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz (2000.00-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x6f6  Family=0x6  Model=0xf  Stepping=6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 2128908288 (2030 MB)
avail memory = 2009247744 (1916 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <APPLE  Apple00>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
arc4random: no preloaded entropy cache
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 2000004060 Hz quality 1000
random: entropy device external interface
[ath_hal] loaded
kbd0 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff8113c740, 0) error 19
000.000045 [4212] netmap_init               netmap: loaded module
nexus0
cryptosoft0: <software crypto> on motherboard
aesni0: No AES or SHA support.
acpi0: <APPLE Apple00> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x17, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20f0-0x20f7 mem 0x90380000-0x903fffff,0x80000000-0x8fffffff,0x90400000-0x9043ffff at device 2.0 on pci0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 16124k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> mem 0x90300000-0x9037ffff at device 2.1 on pci0
pci0: <dasp, performance counters> at device 7.0 (no driver attached)
hdac0: <Intel 82801G HDA Controller> mem 0x90440000-0x90443fff at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff
pci1: <ACPI PCI bus> on pcib1
mskc0: <Marvell Yukon 88E8053 Gigabit Ethernet> port 0x3000-0x30ff mem 0x90200000-0x90203fff at device 0.0 on pci1
msk0: <Marvell Technology Group Ltd. Yukon EC Id 0xb6 Rev 0x02> on mskc0
msk0: Using defaults for TSO: 65518/35/2048
msk0: Ethernet address: [_MAC_XXXXXXXXXX]
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0x90100000-0x9010ffff at device 0.0 on pci2
arc4random: no preloaded entropy cache
ath0: AR5413 mac 10.3 RF5424 phy 6.1
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x20a0-0x20bf at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2080-0x209f at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x2060-0x207f at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x2040-0x205f at device 29.3 on pci0
usbus3 on uhci3
usbus3: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x90445400-0x904457ff at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
usbus4: 480Mbps High Speed USB v2.0
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib3: failed to allocate initial memory window: 0x90000000-0x900fffff
pci3: <ACPI PCI bus> on pcib3
fwohci0: <Lucent FW322/323> mem 0x90001000-0x90001fff at device 3.0 on pci3
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:fb:e6
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: PhysicalUpperBound register is not implemented.  Physical memory access is limited to the first 4GB
fwohci0: PhysicalUpperBound = 0x00000000
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x20e8-0x20ef,0x2104-0x2107,0x20e0-0x20e7,0x2100-0x2103,0x20c0-0x20cf at device 31.1 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ICH7M AHCI SATA controller> port 0x20d8-0x20df,0x20fc-0x20ff,0x20d0-0x20d7,0x20f8-0x20fb,0x2020-0x202f mem 0x90445000-0x904453ff at device 31.2 on pci0
ahci0: AHCI v1.10 with 4 1.5Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ichsmb0: <Intel 82801GB (ICH7) SMBus controller> port 0xefa0-0xefbf at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
asmc0: <Apple SMC Mac Mini 2,1> port 0x300-0x31f irq 6 on acpi0
ichwd0: <Intel ICH7M watchdog timer> on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Sigmatel STAC9221 HDA CODEC> at cad 0 on hdac0
hdaa0: <Sigmatel STAC9221 Audio Function Group> at nid 1 on hdacc0
pcm0: <Sigmatel STAC9221 (Digital 6ch/4ch)> at nid 12,10,16 and 15,17 on hdaa0
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen4.1: <Intel EHCI root HUB> at usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen3.1: <Intel UHCI root HUB> at usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ada0 at ahcich2 bus 0 scbus1 target 0 lun 0
ada0: <ST9160821AS 3.ALC> ATA-7 SATA 1.x device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors)
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA CD-RW  CW-8124 DACH> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/2/40/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/0/0/0x67<INT,USR,SYS,REA,WRI>
Trying to mount root from zfs:wddisk/ROOT/default []...
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
Root mount waiting for: usbus4
uhub1: 8 ports with 8 removable, self powered
Root mount waiting for: usbus4
Root mount waiting for: usbus4
ugen4.2: <Western Digital My Passport 074A> at usbus4
umass0 on uhub1
umass0: <MSC Bulk-Only Transport> on usbus4
umass0:  SCSI over Bulk-Only; quirks = 0x4000
umass0:2:0: Attached to scbus2
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <WD My Passport 074A 1022> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
da0: 40.000MB/s transfers
da0: 953867MB (1953519616 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ses0 at umass-sim0 bus 0 scbus2 target 0 lun 1
ses0: <WD SES Device 1022> Fixed Enclosure Services SPC-4 SCSI device
ses0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXXXXXX]
ses0: 40.000MB/s transfers
ses0: SCSI-3 ENC Device
ugen0.2: <RAPOO RAPOO 2.4G Wireless Device> at usbus0
ukbd0 on uhub4
ukbd0: <RAPOO RAPOO 2.4G Wireless Device, class 0/0, rev 1.10/10.01, addr 2> on usbus0
kbd1 at ukbd0
ums0 on uhub4
ums0: <RAPOO RAPOO 2.4G Wireless Device, class 0/0, rev 1.10/10.01, addr 2> on usbus0
ums0: 6 buttons and [XYZT] coordinates and media buttons ID=1
ugen2.2: <vendor 0x17ef Dual Mode WL Touch Mouse N700> at usbus2
ums1 on uhub0
ums1: <vendor 0x17ef Dual Mode WL Touch Mouse N700, class 0/0, rev 2.00/1.00, addr 2> on usbus2
ums1: 5 buttons and [XYZ] coordinates ID=1
ugen3.2: <vendor 0x05ac product 0x1000> at usbus3
ukbd1 on uhub3
ukbd1: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus3
kbd2 at ukbd1
ums2 on uhub3
ums2: <vendor 0x05ac product 0x1000, class 0/0, rev 2.00/19.65, addr 2> on usbus3
ums2: 5 buttons and [XY] coordinates ID=0
ugen3.3: <Apple Computer, Inc. IR Receiver> at usbus3
uhid0 on uhub3
uhid0: <Apple Computer, Inc. IR Receiver, class 0/0, rev 2.00/1.10, addr 3> on usbus3
random: unblocking device.
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
lo0: link state changed to UP
msk0: link state changed to DOWN
msk0: link state changed to UP
lo1: link state changed to UP
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
__pm_runtime_resume not implemented -- see your local kernel hacker
Successfully added WC MTRR for [0x80000000-0x8fffffff]: 0; 
[drm] Got stolen memory base 0x7f000000, size 0x1000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Failed to find VBIOS tables (VBT)
[drm] applying backlight present quirk
[drm] Connector LVDS-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.LVDS-1
[drm]   - kern.vt.fb.default_mode
pm_runtime_mark_last_busy not implemented -- see your local kernel hacker
__pm_runtime_suspend not implemented -- see your local kernel hacker
pm_runtime_get_if_in_use not implemented -- see your local kernel hacker
[drm] Connector VGA-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.VGA-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DVI-D-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DVI-D-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector SVIDEO-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.SVIDEO-1
[drm]   - kern.vt.fb.default_mode
sched_setscheduler_nocheck not implemented -- see your local kernel hacker
[drm] RC6 disabled, disabling runtime PM support
[drm] initialized overlay support
register_oom_notifier not implemented -- see your local kernel hacker
[drm] Initialized i915 1.6.0 20171222 for drmn0 on minor 0
async_schedule is dodgy -- see your local kernel hacker
pm_runtime_set_autosuspend_delay not implemented -- see your local kernel hacker
__pm_runtime_use_autosuspend not implemented -- see your local kernel hacker
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1024 width=1280 depth=32
cmsize=16 size=5242880
pbase=0x80022000 vbase=0xfffff80080022000
name=drmn0 flags=0x0 stride=5120 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
[drm] Setting output timings on SDVOB failed
async_synchronize_cookie not implemented -- see your local kernel hacker


# drm bug was found: https://github.com/FreeBSDDesktop/kms-drm/issues/134
# booted with 32-bit grub2; for asmc, manually set kFreeBSD.smbios.system.product="Macmini2,1"