Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-03-26 15:33:43
From: polprog
Description: Wyse Winterm S10 revision A1, VGA console, pckbc disabled
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 8.0 (POLPROG2) #0: Mon Jan 14 20:55:58 CET 2019
	krzysiek@glados:/home/krzysiek/netbsd/crossbuild/usr/src/sys/arch/i386/compile/obj/POLPROG2
total memory = 111 MB
avail memory = 92476 KB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
running cgd selftest aes-xts-256 aes-xts-512 done
[177] pckbc0 disabled
RTC BIOS diagnostic error 0x44<ROM_cksum,invalid_time>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Generic PC
mainbus0 (root)
ACPI: RSDP 0x00000000000E7010 000014 (v00 OID_00)
ACPI: RSDT 0x0000000006FB2DA0 000030 (v01 Wyse   RSDT_000 00000114 INSY 00000001)
ACPI: FACP 0x0000000006FB2CA0 000084 (v01 Wyse   FACP_000 30303031 INSY 30303031)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20170303/tbfadt-745)
ACPI: DSDT 0x0000000006FB0000 002C93 (v01 INSYDE CS5535   00001007 INTL 20030122)
ACPI: FACS 0x0000000006FBFFC0 000040
ACPI: BOOT 0x0000000006FB2D30 000028 (v01 Wyse   BOOT_000 00000001 INSY 00000001)
ACPI: DBGP 0x0000000006FB2D60 000034 (v01 Wyse   DBGP_000 00000001 INSY 00000001)
ACPI: 1 ACPI AML tables successfully acquired and loaded
cpu0 at mainbus0
cpu0: Geode(TM) Integrated Processor by National Semi, id 0x552
cpu0: package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20170303
acpi0: X/RSDT: OemId <Wyse  ,RSDT_000,00000114>, AslId <INSY,00000001>
LNKB: ACPI: Found matching pin for 0.15.INTB at func 3: 5
LNKD: ACPI: Found matching pin for 0.15.INTD at func 4: 10
LNKA: ACPI: Found matching pin for 0.14.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x48-0x4b irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
MBR1 (PNP0C01) at acpi0 not configured
COPR (PNP0C04) at acpi0 not configured
XXYV (PNP0501) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0: vendor 100b product 0028 (rev. 0x21)
vga0 at pci0 dev 1 function 1: vendor 100b product 0030 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
rtk0 at pci0 dev 14 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 11
rtk0: Ethernet address [_MAC_XXXXXXXXXX]
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
gcscpcib0 at pci0 dev 15 function 0: vendor 1022 product 2090 (rev. 0x03)
timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000
gcscpcib0: can't alloc an MFGPT for WDT
gcscpcib0: GPIO
gpio0 at gcscpcib0: 32 pins
viaide0 at pci0 dev 15 function 2: AMD CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel ignored (disabled)
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
gcscaudio0 at pci0 dev 15 function 3: AMD Geode CS5536 Audio
gcscaudio0: interrupting at irq 5
gcscaudio0: ac97: Avance Logic ALC655 codec; no 3D stereo
gcscaudio0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at gcscaudio0: full duplex, playback, capture, mmap, independent
gcscaudio0: Virtual format configured - Format SLINEAR, precision 16, channels 2, frequency 48000
gcscaudio0: Latency: 256 milliseconds
ohci0 at pci0 dev 15 function 4: vendor 1022 product 2094 (rev. 0x02)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
gcscehci0 at pci0 dev 15 function 5: vendor 1022 product 2095 (rev. 0x02)
gcscehci0: interrupting at irq 10
gcscehci0: EHCI version 1.0
gcscehci0: 1 companion controller, 4 ports: ohci0
usb1 at gcscehci0: USB revision 2.0
isa0 at gcscpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
wdc0 at isa0 port 0x1f0-0x1f7 irq 14
atabus0 at wdc0 channel 0
isapnp0 at isa0 port 0x279
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 1022 (0x1022) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
uhub1 at usb1: vendor 1022 (0x1022) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
wd0 at atabus0 drive 0
wd0: <ULTIMATE CF CARD>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 7623 MB, 15490 cyl, 16 head, 63 sec, 512 bytes/sect x 15613920 sectors
IPsec: Initialized Security Association Processing.
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/8.0/modules
WARNING: clock lost 4641 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: CHICONY (0x4b3) USB NetVista Full Width Keyboard (0x3025), rev 1.10/1.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)