Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-04-13 12:38:09
From: unrelenting.technology
Description: FreeBSD/amd64 on a Lenovo ThinkPad X240 (IOMMU DMA remap enabled with hw.dmar.enable, now with D19845 patch for IOMMU in LinuxKPI)
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #1 441a3259fb4(drm-v5.0)-dirty: Sat Apr 13 14:40:23 MSK 2019
    [_EMAIL_XXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/GENERIC-NODEBUG amd64
FreeBSD clang version 8.0.0 (branches/release_80 355677) (based on LLVM 8.0.0)
VT(efifb): resolution 1366x768
sysctl_warn_reuse: can't re-use a leaf (debug.mddebug)!
sysctl_warn_reuse: can't re-use a leaf (vm.md_malloc_wait)!
module_register: cannot register g_md from kernel; already loaded from geom_md.ko
Module g_md failed to register: 17
CPU: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz (1696.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x40651  Family=0x6  Model=0x45  Stepping=1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x21<LAHF,ABM>
  Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
  XSAVE Features=0x1<XSAVEOPT>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8174383104 (7795 MB)
ACPI APIC Table: <LENOVO TP-GI   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-39 on motherboard
Launching APs: 1 2 3
Timecounter "TSC" frequency 1696110706 Hz quality 1000
random: entropy device external interface
The GEOM class MD is already loaded.
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8117f8d0, 0) error 19
kbd1 at kbdmux0
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
000.000053 [4254] netmap_init               netmap: loaded module
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TP-GI> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
dmar0: <DMA remap> iomem 0xfed90000-0xfed90fff on acpi0
dmar1: <DMA remap> iomem 0xfed91000-0xfed91fff on acpi0
dmar1: programming irte[0] rid 0xf0f8 high 0x4f0f8 low 0x300011
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
dmar1: programming irte[1] rid 0xf0f8 high 0x4f0f8 low 0x200320001
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
dmar1: programming irte[3] rid 0xf078 high 0x4f078 low 0x100300001
dmar1: programming irte[4] rid 0xf078 high 0x4f078 low 0x200330001
dmar1: programming irte[5] rid 0xf078 high 0x4f078 low 0x300300001
dmar1: programming irte[7] rid 0xf078 high 0x4f078 low 0x340001
dmar1: programming irte[9] rid 0xf078 high 0x4f078 low 0x370001
dmar1: programming irte[2] rid 0xf078 high 0x4f078 low 0x330001
Event timer "HPET" frequency 14318180 Hz quality 550
dmar1: programming irte[3] rid 0xf078 high 0x4f078 low 0x100300001
dmar1: programming irte[4] rid 0xf078 high 0x4f078 low 0x200330001
dmar1: programming irte[5] rid 0xf078 high 0x4f078 low 0x300300001
dmar1: programming irte[6] rid 0xf078 high 0x4f078 low 0x350001
Event timer "HPET1" frequency 14318180 Hz quality 440
dmar1: programming irte[7] rid 0xf078 high 0x4f078 low 0x340001
Event timer "HPET2" frequency 14318180 Hz quality 440
dmar1: programming irte[8] rid 0xf078 high 0x4f078 low 0x360001
Event timer "HPET3" frequency 14318180 Hz quality 440
dmar1: programming irte[9] rid 0xf078 high 0x4f078 low 0x370001
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0000000-0xe03fffff,0xc0000000-0xdfffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xe0530000-0xe0533fff at device 3.0 on pci0
dmar1: programming irte[10] rid 0x18 high 0x40018 low 0x380001
unknown: dmar1 pci0:0:29:0 rid e8 domain 0 mgaw 48 agaw 48 re-mapped
unknown: dmar1 pci0:0:20:0 rid a0 domain 1 mgaw 48 agaw 48 re-mapped
hdac0: dmar1 pci0:0:3:0 rid 18 domain 2 mgaw 48 agaw 48 re-mapped
xhci0: <Intel Panther Point USB 3.0 controller> mem 0xe0520000-0xe052ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
dmar1: programming irte[11] rid 0xa0 high 0x400a0 low 0x200340001
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> port 0x3080-0x309f mem 0xe0500000-0xe051ffff,0xe053e000-0xe053efff at device 25.0 on pci0
em0: Using 1024 tx descriptors and 1024 rx descriptors
em0: Using an MSI interrupt
em0: dmar1 pci0:0:25:0 rid c8 domain 3 mgaw 48 agaw 48 re-mapped
dmar1: programming irte[12] rid 0xc8 high 0x400c8 low 0x390001
dmar1: programming irte[12] rid 0xc8 high 0x400c8 low 0x300310001
dmar1: programming irte[12] rid 0xc8 high 0x400c8 low 0x200350001
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xe0534000-0xe0537fff at device 27.0 on pci0
dmar1: programming irte[13] rid 0xd8 high 0x400d8 low 0x200360001
hdac1: dmar1 pci0:0:27:0 rid d8 domain 4 mgaw 48 agaw 48 re-mapped
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xe053d000-0xe053d3ff at device 29.0 on pci0
dmar1: programming irte[14] rid 0xf0f8 high 0x4f0f8 low 0x390011
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xe053c000-0xe053c7ff at device 31.2 on pci0
ahci0: dmar1 pci0:0:31:2 rid fa domain 5 mgaw 48 agaw 48 re-mapped
dmar1: programming irte[15] rid 0xfa high 0x400fa low 0x200370001
ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.1C)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
dmar1: programming irte[16] rid 0xf0f8 high 0x4f0f8 low 0x3a0001
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
dmar1: programming irte[17] rid 0xf0f8 high 0x4f0f8 low 0x200380001
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 10.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1
pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <OCZ-ARC100 1.01> ATA8-ACS SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Trying to mount root from zfs:zroot/ROOT/new []...
uhub0: 13 ports with 13 removable, self powered
iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xe0400000-0xe0401fff at device 0.0 on pci2
dmar1: programming irte[18] rid 0x300 high 0x40300 low 0x3b0001
iwm0: dmar1 pci0:3:0:0 rid 300 domain 6 mgaw 48 agaw 48 re-mapped
iwm0: hw rev 0x140, fw ver 17.352738.0, address [_MAC_XXXXXXXXXX]
uhub1: 3 ports with 3 removable, self powered
ugen0.2: <vendor 0x8087 product 0x07dc> at usbus0
ugen1.2: <vendor 0x8087 product 0x8000> at usbus1
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] Unable to create a private tmpfs mount, hugepage support will be disabled(-19).
__pm_runtime_resume not implemented -- see your local kernel hacker
pm_runtime_mark_last_busy not implemented -- see your local kernel hacker
__pm_runtime_suspend not implemented -- see your local kernel hacker
vgapci0: dmar0 pci0:0:2:0 rid 10 domain 0 mgaw 48 agaw 48 re-mapped
Failed to add WC MTRR for [0xc0000000-0xdfffffff]: -22; performance may suffer
[drm] Got stolen memory base 0xbda00000, size 0x2000000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
dmar1: programming irte[19] rid 0xf0f8 high 0x4f0f8 low 0x200390011
[drm] Connector eDP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.eDP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-1
[drm]   - kern.vt.fb.default_mode
[drm] Connector DP-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.DP-2
[drm]   - kern.vt.fb.default_mode
[drm] Connector HDMI-A-2: get mode from tunables:
[drm]   - kern.vt.fb.modes.HDMI-A-2
[drm]   - kern.vt.fb.default_mode
pm_runtime_get_if_in_use not implemented -- see your local kernel hacker
sched_setscheduler_nocheck not implemented -- see your local kernel hacker
register_oom_notifier not implemented -- see your local kernel hacker
[drm] Initialized i915 1.6.0 20181204 for drmn0 on minor 0
register_acpi_notifier not implemented -- see your local kernel hacker
async_schedule is dodgy -- see your local kernel hacker
pm_runtime_set_autosuspend_delay not implemented -- see your local kernel hacker
__pm_runtime_use_autosuspend not implemented -- see your local kernel hacker
async_synchronize_cookie not implemented -- see your local kernel hacker
ugen0.2: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected)
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=768 width=1366 depth=32
cmsize=16 size=4227072
pbase=0xc0000000 vbase=0xfffff800c0000000
name=drmn0 flags=0x0 stride=5504 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: inteldrmfb frame buffer device
ugen1.3: <ELAN Touchscreen> at usbus1
wmt0 on uhub2
wmt0: <ELAN Touchscreen, class 0/0, rev 2.00/0.11, addr 3> on usbus1
wmt0: 10 contacts and [WH]. Report range [0:0] - [3520:1984]
lo0: link state changed to UP
hdac0: Unexpected unsolicited response from address 0: 00000000
hdac0: Unexpected unsolicited response from address 0: 00000000
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge0: changing name to 'bhyve0'
lo1: changing name to 'jail0'
jail0: link state changed to UP
wlan0: Ethernet address: [_MAC_XXXXXXXXXX]
wlan0: link state changed to UP
check_move_unevictable_pages not implemented -- see your local kernel hacker
acpi_tz0: _CRT value is absurd, ignored (200.1C)