Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-04-25 11:51:02
From: Patch Adam
Description: OpenBSD 6.5 on Supermicro A2SDi-4C-HLN4F with Intel C3558
# OpenBSD 6.5 on Supermicro A2SDi-4C-HLN4F with Intel C3558
# https://www.supermicro.com/products/system/Mini-ITX/SYS-E200-9A.cfm
# https://www.supermicro.com/products/motherboard/Atom/A2SDi-4C-HLN4F.cfm
# ----------------------------------------------------------------------------
# 1. MANUAL BIOS SETTINGS
01. at boot, press "delete" to run setup
02. save & exit> restore optimized default
03. advanced> BOOT> Quiet boot> disabled
04. advanced> CPU> CPU C state> disabled
05. SATA> SATA 1> I-SATA0: TOSHIBA MK5055GSX 500GB
06. SERIAL> COM1 console redirection> enabled
07. SERIAL> COM1 console redirection> COM1 bits per second> 115200 (default)
08. SERIAL> COM1 console redirection> COM1 data bits> 8 (default)
09. SERIAL> COM1 console redirection> COM1 parity> none (default)
10. SERIAL> COM1 console redirection> COM1 flow control> none (default)
11. SERIAL> COM1 console redirection> COM1 putty keypad> vt100 (default)
12. ACPI> Headless support> enabled
NOTE: Intel Ethernet X544 1GbE
NIC | PCI Device ID | PCI Address
1 | 15E4 | 06:00:00
2 | 15E4 | 06:00:01
3 | 15E5 | 08:00:00
4 | 15E5 | 08:00:01
13. save & exit> save changes and reset
# ----------------------------------------------------------------------------
# 2. HEADLESS MODE
IPA="192.168.1.3"; # IPMI IP ADDRESS
alias ipmi="ipmitool -o supermicro -H $IPA -p 623 -I lanplus -C 3 -U ADMIN -a -L ADMINISTRATOR";
# >ipmi power on;
# >ipmi sol activate;
# sol> F11 (to invoke boot menu)
# sol> select UEFI: SanDisk, Partition 1 or similar for USB stick
# boot> stty com1 115200
# boot> set tty com1
# boot> boot -c
# UKC> help
# UKC> list
# UKC> find ne
# UKC> show channel
# UKC> show target
# UKC> exit
# boot> boot /bsd
# ----------------------------------------------------------------------------
# UKC LOG
UKC> find ne
103 ne* at pci* dev -1 function -1 flags 0x0
104 ne* at pcmcia* function -1 irq -1 flags 0x0
UKC> show channel
33 atapiscsi* at wdc0|wdc1|wdc*|pciide*|pciide* channel -1 flags 0x0
34 wd* at wdc0|wdc1|wdc*|pciide*|pciide* channel -1 flags 0x0
UKC> show target
30 cd* at scsibus* target -1 lun -1 flags 0x0
31 sd* at scsibus* target -1 lun -1 flags 0x0
32 st* at scsibus* target -1 lun -1 flags 0x0
# ----------------------------------------------------------------------------
# BOOT LOG
probing: pc0 com0 com1 mem[252K 384K 1898M 106M 148K 5M 14336M]
disk: hd0 hd1* hd2*
>> OpenBSD/amd64 BOOTX64 3.43
boot> stty com1 115200
boot> set tty com1
switching console to com1
>> OpenBSD/amd64 BOOTX64 3.43
boot> boot /bsd
cannot open hd0a:/etc/random.seed: No such file or directory
booting hd0a:/bsd: 3683153+1524736+3888856+0+593920=0x940360
entry point at 0x1001000
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.5 (RAMDISK_CD) #3: Sat Apr 13 14:55:38 MDT 2019
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17125425152 (16332MB)
avail mem = 16602427392 (15833MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7f0c4000 (34 entries)
bios0: vendor American Megatrends Inc. version "1.1" date 08/28/2018
bios0: Supermicro A2SDi-4C-HLN4F
acpi0 at bios0: rev 2, can't enable ACPI
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2200.40 MHz, 06-5f-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 2MB 64b/line 16-way L2 cache
cpu0: cannot disable silicon debug
cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE
pci0 at mainbus0 bus 0
0:31:5: mem address conflict 0xfe010000/0x1000
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x1980 rev 0x11
pchb1 at pci0 dev 4 function 0 vendor "Intel", unknown product 0x19a1 rev 0x11
vendor "Intel", unknown product 0x19a2 (class system subclass root complex event, rev 0x11) at pci0 dev 5 function 0 not configured
ppb0 at pci0 dev 6 function 0 vendor "Intel", unknown product 0x19a3 rev 0x11
pci1 at ppb0 bus 1
vendor "Intel", unknown product 0x19e2 (class processor subclass Co-processor, rev 0x11) at pci1 dev 0 function 0 not configured
ppb1 at pci0 dev 10 function 0 vendor "Intel", unknown product 0x19a5 rev 0x11
pci2 at ppb1 bus 2
ppb2 at pci0 dev 16 function 0 vendor "Intel", unknown product 0x19aa rev 0x11
pci3 at ppb2 bus 3
nvme0 at pci3 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: unable to map interrupt
ppb3 at pci0 dev 17 function 0 vendor "Intel", unknown product 0x19ab rev 0x11
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
pci5 at ppb4 bus 5
"ASPEED Technology AST2000" rev 0x30 at pci5 dev 0 function 0 not configured
vendor "Intel", unknown product 0x19ac (class system subclass miscellaneous, rev 0x11) at pci0 dev 18 function 0 not configured
ahci0 at pci0 dev 19 function 0 vendor "Intel", unknown product 0x19b2 rev 0x11: unable to map interrupt
ahci1 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x19c2 rev 0x11: unable to map interrupt
xhci0 at pci0 dev 21 function 0 vendor "Intel", unknown product 0x19d0 rev 0x11: couldn't map interrupt
ppb5 at pci0 dev 22 function 0 vendor "Intel", unknown product 0x19d1 rev 0x11
pci6 at ppb5 bus 6
vendor "Intel", unknown product 0x15e4 (class network subclass ethernet, rev 0x11) at pci6 dev 0 function 0 not configured
vendor "Intel", unknown product 0x15e4 (class network subclass ethernet, rev 0x11) at pci6 dev 0 function 1 not configured
ppb6 at pci0 dev 23 function 0 vendor "Intel", unknown product 0x19d2 rev 0x11
pci7 at ppb6 bus 7
vendor "Intel", unknown product 0x15e5 (class network subclass ethernet, rev 0x11) at pci7 dev 0 function 0 not configured
vendor "Intel", unknown product 0x15e5 (class network subclass ethernet, rev 0x11) at pci7 dev 0 function 1 not configured
vendor "Intel", unknown product 0x19d3 (class communications subclass miscellaneous, rev 0x11) at pci0 dev 24 function 0 not configured
vendor "Intel", unknown product 0x19dc (class bridge subclass ISA, rev 0x11) at pci0 dev 31 function 0 not configured
vendor "Intel", unknown product 0x19de (class memory subclass miscellaneous, rev 0x11) at pci0 dev 31 function 2 not configured
vendor "Intel", unknown product 0x19df (class serial bus subclass SMBus, rev 0x11) at pci0 dev 31 function 4 not configured
vendor "Intel", unknown product 0x19e0 (class serial bus unknown subclass 0x80, rev 0x11) at pci0 dev 31 function 5 not configured
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: console
efifb0 at mainbus0: 1024x768, 32bpp
wsdisplay at efifb0 not configured
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
Welcome to the OpenBSD/amd64 6.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? S
# ls /dev
MAKEDEV fd0a rcd0c rsd0d rsd0p rwd0k sd0g stdout wd0g wskbd2
bio fd0b rd0a rsd0e rst0 rwd0l sd0h tty wd0h xf86
bpf fd0c rd0c rsd0f rwd0a rwd0m sd0i tty00 wd0i zero
bpf0 fd0i rfd0a rsd0g rwd0b rwd0n sd0j tty01 wd0j
cd0a klog rfd0b rsd0h rwd0c rwd0o sd0k ttyC0 wd0k
cd0c kmem rfd0c rsd0i rwd0d rwd0p sd0l urandom wd0l
console ksyms rfd0i rsd0j rwd0e sd0a sd0m wd0a wd0m
cua00 mem rrd0a rsd0k rwd0f sd0b sd0n wd0b wd0n
cua01 nrst0 rrd0c rsd0l rwd0g sd0c sd0o wd0c wd0o
diskmap null rsd0a rsd0m rwd0h sd0d sd0p wd0d wd0p
enrst0 random rsd0b rsd0n rwd0i sd0e stderr wd0e wskbd0
erst0 rcd0a rsd0c rsd0o rwd0j sd0f stdin wd0f wskbd1
# install
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN. You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.
Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') test
Available network interfaces are: vlan0.
Which network interface do you wish to configure? (or 'done') [vlan0] done
DNS domain name? (e.g. 'example.com') [my.domain] local
DNS nameservers? (IP address list or 'none') [none][_IP_XXXXXX]
Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Do you want the X Window System to be started by xenodm(1)? [no]
Change the default console to com1? [yes]
Available speeds are: 9600 19200 38400 57600 115200.
Which speed should com1 use? (or 'done') [115200]
Setup a user? (enter a lower-case loginname, or 'no') [no]
Since no user was setup, root logins via sshd(8) might be useful.
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no] yes
Available disks are: none.
Which disk is the root disk? ('?' for details) ^C
test# reboot
syncing disks... done
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
fatal double fault in supervisor mode
trap type 13 code 0 rip ffffffff8103a904 cs 8 rflags 10246 cr2 ffff8000219ebff8 cpl d rsp ffff8000219ec000
gsbase 0xffffffff818a1ff0 kgsbase 0x0
panic: trap type 13, code=0, pc=ffffffff8103a904
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode
panic: attempt to execute user address 0x0 in supervisor mode