Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-04-26 16:35:43
From: ganbold
Description: NanoPI K1 Plus
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #65 r344456M: Sun Apr 21 19:49:58 +08 2019
tsgan@beastie:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC arm64
FreeBSD clang version 7.0.1 (branches/release_70 348686) (based on LLVM 7.0.1)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 47ef5000 mode 2 pages 22
MAP b8f30000 mode 2 pages 1
MAP b8f32000 mode 2 pages 1
MAP bdf50000 mode 2 pages 16
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
clk_fixed2: <Fixed clock> on ofw_clkbus0
clk_fixed3: <Fixed clock> on ofw_clkbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 46 on simplebus0
iichb0: could not find clock
device_attach: iichb0 attach returned 19
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 46 on simplebus0
iichb0: could not find clock
device_attach: iichb0 attach returned 19
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1f02400-0x1f027ff irq 46 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
sy8106a0: <Silergy SY8106A regulator> at addr 0xca on iicbus0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 40 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 19,20,21 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 47 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c9f irq 22,23 on simplebus0
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 2000
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 43,44 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c1c803,0x1c1d800-0x1c1d803 on simplebus0
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c250ff irq 4 on simplebus0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 7 on simplebus0
mmc0: <MMC/SD bus> on aw_mmc0
aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff irq 8 on simplebus0
mmc1: <MMC/SD bus> on aw_mmc1
aw_mmc2: <Allwinner Integrated MMC/SD controller> mem 0x1c11000-0x1c11fff irq 9 on simplebus0
mmc2: <MMC/SD bus> on aw_mmc2
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1a000-0x1c1a0ff irq 11 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 12 on simplebus0
usbus1 on ohci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff irq 13 on simplebus0
usbus2: EHCI version 1.0
usbus2 on ehci1
ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 14 on simplebus0
usbus3 on ohci1
ehci2: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1c0ff irq 15 on simplebus0
usbus4: EHCI version 1.0
usbus4 on ehci2
ohci2: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 16 on simplebus0
usbus5 on ohci2
ehci3: <Allwinner Integrated USB 2.0 controller> mem 0x1c1d000-0x1c1d0ff irq 17 on simplebus0
usbus6: EHCI version 1.0
usbus6 on ehci3
ohci3: <Generic OHCI Controller> mem 0x1c1d400-0x1c1d4ff irq 18 on simplebus0
usbus7 on ohci3
gpioc0: <GPIO controller> on gpio0
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 24 on simplebus0
miibus0: <MII bus> on awg0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 7 on miibus0
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
awg0: Ethernet address: [_MAC_XXXXXXXXXX]
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 27 on simplebus0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 33 on simplebus0
uart0: console (115384,n,8,1)
uart1: <16750 or compatible> mem 0x1c28c00-0x1c28fff irq 36 on simplebus0
aw_ir0: <Allwinner CIR controller> mem 0x1f02000-0x1f023ff irq 45 on simplebus0
aw_ir0: hwreset_get_by_ofw_idx = 0
iic0: <I2C generic I/O> on iicbus0
gpioc1: <GPIO controller> on gpio1
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Allwinner EHCI root HUB> at usbus2
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen0.1: <Allwinner EHCI root HUB> at usbus0
uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Allwinner EHCI root HUB> at usbus4
uhub4: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
usbus7: 12Mbps Full Speed USB v1.0
AW_MMC_INT_RESP_TIMEOUT
ugen5.1: <Generic OHCI root HUB> at usbus5
uhub5: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Allwinner EHCI root HUB> at usbus6
uhub6: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
ugen7.1: <Generic OHCI root HUB> at usbus7
uhub7: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc0: No compatible cards found on bus
aw_mmc0: Spurious interrupt - no active request, rint: 0x00000004
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
mmc1: No compatible cards found on bus
aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
uhub0: 1 port with 1 removable, self powered
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
uhub3: 1 port with 1 removable, self powered
uhub5: 1 port with 1 removable, self powered
AW_MMC_INT_DATA_END_BIT_ERR
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
AW_MMC_INT_RESP_TIMEOUT
uhub7: 1 port with 1 removable, self powered
mmc2: Failed to set VCCQ for card at relative address 2
mmcsd0: 8GB <MMCHC 8WPD3R 0.0 SN 445DB819 MFG 09/2017 by 21 0x0000> at mmc2 52.0MHz/8bit/4096-block
mmcsd0boot0: 4MB partion 1 at mmcsd0
mmcsd0boot1: 4MB partion 2 at mmcsd0
mmcsd0rpmb: 524kB partion 3 at mmcsd0
Release APs...done
CPU 0: ARM Cortex-A53 r0p4 affinity: 0
Trying to mount root from ufs:/dev/ufs/system [rw]...
Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
Instruction Set Attributes 1 = <>
Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
Processor Features 1 = <0>
Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
Memory Model Features 1 = <>
Memory Model Features 2 = <32b CCIDX,48b VA>
Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
Debug Features 1 = <0>
Auxiliary Features 0 = <0>
Auxiliary Features 1 = <0>
CPU 1: ARM Cortex-A53 r0p4 affinity: 1
CPU 2: ARM Cortex-A53 r0p4 affinity: 2
CPU 3: ARM Cortex-A53 r0p4 affinity: 3
WARNING: WITNESS option enabled, expect reduced performance.
Warning: bad time from time-of-day clock, system time will not be set accurately
uhub1: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
uhub4: 1 port with 1 removable, self powered
uhub6: 1 port with 1 removable, self powered
lo0: link state changed to UP
awg0: link state changed to DOWN
awg0: link state changed to UP
aw_spi0: <Allwinner SPI> mem 0x1c68000-0x1c68fff irq 25 on simplebus0
spibus0: <OFW SPI bus> on aw_spi0
spibus0: <unknown card> at cs 0 mode 0
nd6_setmtu0: new link MTU on awg0 (576) is too small for IPv6
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: Unknown SPI flash device. Vendor: 00, device id: 0000
device_attach: mx25l0 attach returned 6
Security policy loaded: MAC/ntpd (mac_ntpd)