Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-04-29 21:02:41
From: nsouch
Description: NetASQ U70 FW8.0.3 bootverbose
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
NS-BSD 8.0.3- #0: Wed Oct 7 17:51:19 CEST 2009
[_EMAIL_XXXXXXXXXXXXXXXX]:/usr/home/build/fw-8.0.3/sys-6.3/work/sys/i386/compile/NETASQ.S
memory: real:430 kmap:3075 ASQ:96 mbufs:7 (MB)
mbuf: maxsock:1864 nmbufs:5008 nmbclusters:3144 (limit nmbufs:4006 nmbclusters:2515)
Preloaded elf kernel "/kernel" at 0x40821000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0x408211a4.
MP Configuration Table version 1.4 found at 0x400f1c60
Table 'FACP' at 0x1bee3080
Table '_HPT' at 0x1bee8840
Table '_WDT' at 0x1bee8880
Table 'MCFG' at 0x1bee8900
Table 'APIC' at 0x1bee87c0
MADT: Found table at 0x1bee87c0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <CN700 AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193350 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1000008119 Hz
CPU: VIA/IDT Unknown (1000.01-MHz 686-class CPU)
Origin = "CentaurHauls" Id = 0x6d0 Stepping = 0
Features=0xa7c9bbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CLFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Features2=0x4181<SSE3,EST,TM2,xTPR>
real memory = 468582400 (446 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001b6c0fff, 447332352 bytes (109212 pages)
avail memory = 349888512 (333 MB)
bios32: Found BIOS32 Service Directory header at 0x400f8e00
bios32: Entry = 0xf9410 (400f9410) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x9460
pnpbios: Found PnP BIOS data at 0x400fa020
pnpbios: Entry = f0000:a050 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
crypto: <crypto core>
wlan: <802.11 Link Layer>
io: <I/O>
random: <entropy source, Hardware, VIA Nehemiah>
mem: <memory>
null: <null device, zero device>
PadLock: HW support loaded for AES-CBC,SHA1,SHA256.
crypto: assign driver 0, flags 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
npx0: INT 16 interface
acpi0: <CN700 AWRDACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
ACPI-0438: *** Error: Looking up [FAN_] in namespace, AE_NOT_FOUND
SearchNode 0x47e3a400 StartNode 0x47e3a400 ReturnNode 0
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008f60
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=03141106)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.PATA.PAPR -> bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.P2ER -> bus 0 dev 19 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SBF7.SBVL -> bus 0 dev 17 func 7
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SAPR -> bus 0 dev 15 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB1.U2F0 -> bus 0 dev 16 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB2.U2F1 -> bus 0 dev 16 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB3.U2F2 -> bus 0 dev 16 func 2
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB4.U2F3 -> bus 0 dev 16 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.EHCI.U2F4 -> bus 0 dev 16 func 4
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PB.P2PR -> bus 0 dev 19 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI1.PE5C.PE5R -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI1.PE6C.PE6R -> bus 0 dev 0 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI1.AZAC.AZAR -> bus 0 dev 1 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0x50d75000 pa 0x9e000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE5C.PE5R -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE6C.PE6R -> bus 0 dev 0 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.AZAC.AZAR -> bus 0 dev 1 func 0
ACPI timer: 1/2 1/1 1/1 1/2 1/1 1/1 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 6 7 10 11 12
Validation 0 10 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12
Validation 0 11 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 6 7 10 11 12
Validation 0 11 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 6 7 10 11 12
Validation 0 255 N 0 3 4 6 7 10 11 12
After Disable 0 255 N 0 3 4 6 7 10 11 12
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x410
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1106, dev=0x0314, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base d0000000, size 27, enabled
found-> vendor=0x1106, dev=0x1314, revid=0x00
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x2314, revid=0x00
bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x3208, revid=0x00
bus=0, slot=0, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x4314, revid=0x00
bus=0, slot=0, func=4
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x7314, revid=0x00
bus=0, slot=0, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0xb198, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D3 current D0
found-> vendor=0x1106, dev=0x5287, revid=0x20
bus=0, slot=15, func=0
class=01-01-8f, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000ff00, size 3, enabled
map[14]: type 4, range 32, base 0000fe00, size 2, enabled
map[18]: type 4, range 32, base 0000fd00, size 3, enabled
map[1c]: type 4, range 32, base 0000fc00, size 2, enabled
map[20]: type 4, range 32, base 0000fb00, size 4, enabled
map[24]: type 1, range 32, base dffff000, size 10, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x0571, revid=0x07
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fa00, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x91
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0218, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f900, size 5, enabled
pcib0: matched entry for 0.16.INTA
pcib0: slot 16 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x3038, revid=0x91
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f800, size 5, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3038, revid=0x91
bus=0, slot=16, func=2
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f700, size 5, enabled
pcib0: matched entry for 0.16.INTB
pcib0: slot 16 INTB hardwired to IRQ 21
found-> vendor=0x1106, dev=0x3038, revid=0x91
bus=0, slot=16, func=3
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000f600, size 5, enabled
pcib0: matched entry for 0.16.INTD
pcib0: slot 16 INTD hardwired to IRQ 23
found-> vendor=0x1106, dev=0x3104, revid=0x90
bus=0, slot=16, func=4
class=0c-03-20, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dfffe000, size 8, enabled
pcib0: matched entry for 0.16.INTC
pcib0: slot 16 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3287, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x287e, revid=0x00
bus=0, slot=17, func=7
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287b, revid=0x00
bus=0, slot=19, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x287a, revid=0x00
bus=0, slot=19, func=1
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x2000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xdd000000-0xdeffffff
pcib1: prefetched decode 0xd8000000-0xdbffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1106, dev=0x3344, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base d8000000, size 26, enabled
pcib1: requested memory range 0xd8000000-0xdbffffff: good
map[14]: type 1, range 32, base dd000000, size 24, enabled
pcib1: requested memory range 0xdd000000-0xddffffff: good
pcib0: no PRT entry for 0.1.INTA
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA ATA controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xdffff000-0xdffff3ff irq 21 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 49
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xff00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xfe00
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata2: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xfd00
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xfc00
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
atapci1: <VIA ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51
ata1: [MPSAFE]
uhci0: <VIA 83C572 USB controller> port 0xf900-0xf91f irq 20 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf900
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xf800-0xf81f irq 22 at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf800
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xf700-0xf71f irq 21 at device 16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf700
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xf600-0xf61f irq 23 at device 16.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf600
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xdfffe000-0xdfffe0ff irq 22 at device 16.4 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdfffe000
ehci0: [GIANT-LOCKED]
ehci0: Dropped interrupts workaround enabled
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
*** Found VIA 8251 PCI-ISA bridge, trying to initialize the GPIO
*** Found VIA 8251 PCI-ISA bridge, trying to initialize the GPIO
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 19.1 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xdfe00000-0xdfefffff
pcib2: prefetched decode 0xdfd00000-0xdfdfffff
pcib2: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI Host-PCI bridge> on acpi0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.VT86.BDRE -> bus 0 dev 17 func 0
pci128: <ACPI PCI bus> on pcib3
pci128: physical bus=128
found-> vendor=0x1106, dev=0x287c, revid=0x00
bus=128, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib3: matched entry for 128.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 20
found-> vendor=0x1106, dev=0x287d, revid=0x00
bus=128, slot=0, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
pcib3: matched entry for 128.0.INTC
pcib3: slot 0 INTC hardwired to IRQ 22
pcib4: <ACPI PCI-PCI bridge> irq 20 at device 0.0 on pci128
pcib4: secondary bus 129
pcib4: subordinate bus 129
pcib4: I/O decode 0xc000-0xcfff
pcib4: memory decode 0xcfb00000-0xcfbfffff
pcib4: prefetched decode 0xcfe00000-0xcfefffff
pci129: <ACPI PCI bus> on pcib4
pci129: physical bus=129
pcib5: <ACPI PCI-PCI bridge> irq 22 at device 0.1 on pci128
pcib5: secondary bus 130
pcib5: subordinate bus 130
pcib5: I/O decode 0xb000-0xbfff
pcib5: memory decode 0xcfd00000-0xcfdfffff
pcib5: prefetched decode 0xcfc00000-0xcfcfffff
pci130: <ACPI PCI bus> on pcib5
pci130: physical bus=130
found-> vendor=0x8086, dev=0x109a, revid=0x00
bus=130, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base cfde0000, size 17, enabled
pcib5: requested memory range 0xcfde0000-0xcfdfffff: good
map[18]: type 4, range 32, base 0000bf00, size 5, enabled
pcib5: requested I/O range 0xbf00-0xbf1f: in range
pcib5: matched entry for 130.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xbf00-0xbf1f mem 0xcfde0000-0xcfdfffff irq 16 at device 0.0 on pci130
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xcfde0000
em0: bpf attached
em0: Ethernet address: [_MAC_XXXXXXXXXX]
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 55
em0: [MPSAFE]
speaker0: <PC speaker> port 0x61 on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4091 0x4091 0x4091 0x4091
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio1: irq maps: 0x4091 0x4099 0x4091 0x4091
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 57
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 58
atkbd0: [GIANT-LOCKED]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 59
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
lapic: Divisor 2, Frequency 50000433 hz
Timecounter "TSC" frequency 1000008119 Hz quality 800
Timecounters tick every 1.000 msec
VIA 82xx GPIO initialized
crypto: <crypto device>
crypto: assign driver 1, flags 6
crypto: driver 1 registers alg 1 flags 0 maxoplen 0
crypto: driver 1 registers alg 2 flags 0 maxoplen 0
crypto: driver 1 registers alg 3 flags 0 maxoplen 0
crypto: driver 1 registers alg 4 flags 0 maxoplen 0
crypto: driver 1 registers alg 5 flags 0 maxoplen 0
crypto: driver 1 registers alg 16 flags 0 maxoplen 0
crypto: driver 1 registers alg 6 flags 0 maxoplen 0
crypto: driver 1 registers alg 7 flags 0 maxoplen 0
crypto: driver 1 registers alg 18 flags 0 maxoplen 0
crypto: driver 1 registers alg 19 flags 0 maxoplen 0
crypto: driver 1 registers alg 20 flags 0 maxoplen 0
crypto: driver 1 registers alg 8 flags 0 maxoplen 0
crypto: driver 1 registers alg 15 flags 0 maxoplen 0
crypto: driver 1 registers alg 9 flags 0 maxoplen 0
crypto: driver 1 registers alg 10 flags 0 maxoplen 0
crypto: driver 1 registers alg 13 flags 0 maxoplen 0
crypto: driver 1 registers alg 14 flags 0 maxoplen 0
crypto: driver 1 registers alg 11 flags 0 maxoplen 0
crypto: driver 1 registers alg 17 flags 0 maxoplen 0
Fast IPsec: Initialized Security Association Processing.
em0: Link is up 1000 Mbps Full Duplex
enc0: bpf attached
lo0: bpf attached
lo1: bpf attached
lo2: bpf attached
lo3: bpf attached
lo4: bpf attached
lo5: bpf attached
crypto_proc: Thread 0 started.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
ad0: 488MB <STI Flash 8.0.0 01/17/07> at ata0-master WDMA2
ad0: 1000944 sectors [993C/16H/63S] 1 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ATA PseudoRAID loaded
pollng: using 1 cpu(s)
pollng: creating taskqueue for cpu0
Mounted root from ufs:/dev/ad0s1a
start_init: trying /sbin/updateinit
start_init: trying /sbin/init
GEOM: Reconfigure md0a, start 8192 length 4186112 end 4194303
GEOM: Reconfigure md0c, start 0 length 4194304 end 4194303
eth0: bpf attached
eth1: bpf attached
eth2: bpf attached
eth3: bpf attached
eth4: bpf attached
eth5: bpf attached
em0: Link is Down
ASQ engine v4.0.0
96Mb total memory
66Mb available for dynamic allocator
ng0: bpf attached
ng1: bpf attached
ng2: bpf attached
ng3: bpf attached
ng4: bpf attached
ng5: bpf attached
ng6: bpf attached
ng7: bpf attached
ng8: bpf attached
ng9: bpf attached
ng10: bpf attached
ng11: bpf attached
ng12: bpf attached
ng13: bpf attached
ng14: bpf attached
ng15: bpf attached
ng16: bpf attached
ng17: bpf attached
ng18: bpf attached
ng19: bpf attached
vlan0: bpf attached
vlan1: bpf attached
vlan2: bpf attached
vlan3: bpf attached
vlan4: bpf attached
vlan5: bpf attached
vlan6: bpf attached
vlan7: bpf attached
vlan8: bpf attached
vlan9: bpf attached
vlan10: bpf attached
vlan11: bpf attached
vlan12: bpf attached
vlan13: bpf attached
vlan14: bpf attached
vlan15: bpf attached
em0: Link is up 1000 Mbps Full Duplex
em0: Link is Down
em0: Link is up 1000 Mbps Full Duplex