Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2019-05-01 15:41:59
From: andrew
Description: FreeBSD/amd64 on Intel Atom 230
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #41 r339632: Wed Oct 24 15:41:07 CEST 2018
    [_EMAIL_XXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/SANNA amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): resolution 640x480
info: [drm] Initialized drm 1.1.0 20060810
CPU: Intel(R) Atom(TM) CPU  230   @ 1.60GHz (1596.15-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106c2  Family=0x6  Model=0x1c  Stepping=2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 1003847680 (957 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <INTEL  D945GLF >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 hardware threads
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
random: entropy device external interface
kbd0 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
acpi0: <INTEL D945GLF> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 6c00000 vs 6bfffff
pcib0: Length mismatch for 3 range: b0000001 vs b0000000
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x20c0-0x20c7 mem 0x48300000-0x4837ffff,0x40000000-0x47ffffff,0x48380000-0x4839ffff irq 16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: aperture size is 128M, detected 7932k stolen memory
drmn0: <Intel i945G> on vgapci0
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drmn0: taking over the fictitious range 0x40000000-0x48000000
info: [drm] initialized overlay support
info: [drm] Connector VGA-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.VGA-1
info: [drm]   - kern.vt.fb.default_mode
drmn0: info: No connectors reported connected with modes
info: [drm] Cannot find any crtc or sizes - going 1024x768
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
vgapci0: Boot video device
hdac0: <Intel 82801G HDA Controller> mem 0x483a0000-0x483a3fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 810xE PCIe 10/100baseTX> port 0x1000-0x10ff mem 0x48200000-0x48200fff,0x48000000-0x4800ffff irq 16 at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x24800000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: [_MAC_XXXXXXXXXX]
pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x2060-0x207f irq 23 at device 29.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x2040-0x205f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801G (ICH7) USB controller USB-D> port 0x2020-0x203f irq 16 at device 29.3 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x483a4000-0x483a43ff irq 23 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
ath0: <Atheros 9227> mem 0x48100000-0x4810ffff irq 21 at device 0.0 on pci4
ath0: [HT] enabling HT modes
ath0: [HT] enabling short-GI in 20MHz mode
ath0: [HT] 1 stream STBC receive enabled
ath0: [HT] 1 stream STBC transmit enabled
ath0: [HT] 2 RX streams; 2 TX streams
ath0: Enabling register serialisation
ath0: AR9227 mac 384.2 RF5133 phy 15.15
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00c0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2090-0x209f irq 18 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0x20a8-0x20af,0x20cc-0x20cf,0x20a0-0x20a7,0x20c8-0x20cb,0x2080-0x208f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xcb000-0xcbfff on isa0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC662 HDA CODEC> at cad 2 on hdac0
hdaa0: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
pcm0: <Realtek ALC662 (Analog)> at nid 20 and 24,25,26 on hdaa0
pcm1: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus1 target 0 lun 0
ada0: <WDC WD5000AADS-00S9B0 01.00A01> ATA8-ACS SATA 2.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada0: 476940MB (976773168 512 byte sectors)
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <LITE-ON DVDRW SOHW-1673S JS01> Removable CD-ROM SCSI device
cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
ada1 at ata3 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD5000AADS-00S9B0 01.00A01> ATA8-ACS SATA 2.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes)
ada1: 476940MB (976773168 512 byte sectors)
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1596147360 Hz quality 1000
Trying to mount root from ufs:/dev/mirror/root [rw]...
GEOM_MIRROR: Device mirror/root launched (2/2).
GEOM_MIRROR: Device mirror/var launched (2/2).
GEOM_MIRROR: Device mirror/usr launched (2/2).
warning: total configured swap (1048576 pages) exceeds maximum recommended amount (992960 pages).
warning: increase kern.maxswzone or reduce amount of swap.
uhub0: 8 ports with 8 removable, self powered
random: unblocking device.
ugen0.2: <INNO TECH USB to Serial> at usbus0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
re0.1: link state changed to UP
re0.2: link state changed to UP
in_scrubprefix: err=51, prefix delete failed
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled