Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-06 08:06:47
From: yamori813
Description: IOData_WN-G300R add spi flash on cs1
---<<BOOT>>---
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #6 896bf9a9272(zrouter)-dirty: Mon May 6 16:53:47 JST 2019
hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/mips.mips/sys/IOData_WN-G300R mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x80334400.
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x003c7000 - 0x01f7dfff, 29061120 bytes (7095 pages)
avail memory = 28307456 (26MB)
__stack_chk_init: WARNING: Initializing stack protection with non-random cookies!
__stack_chk_init: WARNING: This severely limits the benefit of -fstack-protector!
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0
mdio0: <MDIO> on argemdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 267500000 Hz quality 800
Event timer "MIPS32" frequency 267500000 Hz quality 800
argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0
mdio1: <MDIO> on argemdio1
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1
arswitch0: ar9340_hw_global_setup: GMII
arswitch0: ar9340_hw_global_setup: PHY4 - CPU
miibus0: <MII bus> on arswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on arswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00c82e, model 0x0004, rev. 2
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on arswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00c82e, model 0x0004, rev. 2
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on arswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00c82e, model 0x0004, rev. 2
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
etherswitch0: <Switch controller> on arswitch0
mdio2: <MDIO> on arswitch0
mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x0
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x7da000
gpio0: MORI MORI FUNC0 x0
gpio0: MORI MORI FUNC1 xb0a0914
gpio0: MORI MORI FUNC2 x3180000
gpio0: MORI MORI FUNC3 x7
gpio0: MORI MORI FUNC4 x4d
gpiobus0: <GPIO bus> on gpio0
gpioled0: <GPIO led> at pin 15 on gpiobus0
gpioled1: <GPIO led> at pin 13 on gpiobus0
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC address from environment: '[_MAC_XXXXXXXXXX]'
miiproxy0: <MII/MDIO proxy, MII side> on arge0
miiproxy0: attached to target mdio1
arge0: finishing attachment, phymask 0001, proxy set
arge0: unable to attach PHY 0: 6
miiproxy0: detached
device_attach: arge0 attach returned 6
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC address from environment: '[_MAC_XXXXXXXXXX]'
arge1: arge_attach: overriding MII mode to 'GMII'
mii_attach_proxy: not attaching, no mdio device hint for arge1
arge1: finishing attachment, phymask 0000, proxy null
arge1: bpf attached
arge1: Ethernet address: [_MAC_XXXXXXXXXX]
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type en25q32, size 4096K in 64 sectors of 64K, erase size 64K
mx25l1: <M25Pxx Flash Family> at cs 1 mode 0 on spibus0
mx25l1: device type mx25ll32, size 4096K in 64 sectors of 64K, erase size 64K
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
Device configuration finished.
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
GEOM: new disk flash/spi0
GEOM: new disk flash/spi1
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
MAP: flash/spi0: 0x40000, data=0x40000 "/dev/map/bootloader"
MAP: flash/spi0: 40000x3a0000, data=0x3a0000 "/dev/map/upgrade"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: flash/spi0: 40000xf0000, data=0xf0000 "/dev/map/kernel"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: flash/spi0: 130000x2b0000, data=0x2b0000 "/dev/map/rootfs"
MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART"
MAP: No valid partition found at flash/spi1
MAP: No valid partition found at map/rootfs.uzip
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
arswitch0: arswitch_miipollstat: port 2: port -> UP
arswitch0port3: link state changed to UP
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME