Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-10 18:33:40
From: kevinday
Description: Supermicro X10SLM(plus)-F
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE r341666 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz (3500.09-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33342025728 (31797 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <SUPERM SMCI--MB> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 5 4 2 6 3 7 Timecounter "TSC-low" frequency 1750042832 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <SUPERM SMCI--MB> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xf7c00000-0xf7dfffff,0xf7e04000-0xf7e07fff irq 17 at device 0.0 on pci1 ix0: using 2048 tx descriptors and 2048 rx descriptors ix0: msix_init qsets capped at 16 ix0: pxm cpus: 4 queue msgs: 63 admincnt: 1 ix0: using 4 rx queues 4 tx queues ix0: Using MSIX interrupts with 5 vectors ix0: allocated for 4 queues ix0: allocated for 4 rx queues ix0: Ethernet address: [_MAC_XXXXXXXXXX] ix0: PCI Express Bus: Speed 5.0GT/s Width x8 ix0: netmap queues/slots: TX 4/2048, RX 4/2048 ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver> mem 0xf7a00000-0xf7bfffff,0xf7e00000-0xf7e03fff irq 16 at device 0.1 on pci1 ix1: using 2048 tx descriptors and 2048 rx descriptors ix1: msix_init qsets capped at 16 ix1: pxm cpus: 4 queue msgs: 63 admincnt: 1 ix1: using 4 rx queues 4 tx queues ix1: Using MSIX interrupts with 5 vectors ix1: allocated for 4 queues ix1: allocated for 4 rx queues ix1: Ethernet address: [_MAC_XXXXXXXXXX] ix1: PCI Express Bus: Speed 5.0GT/s Width x8 ix1: netmap queues/slots: TX 4/2048, RX 4/2048 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7400000-0xf740ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms> at device 22.1 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7414000-0xf74143ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci3 vgapci0: Boot video device pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci4: <ACPI PCI bus> on pcib4 igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xd000-0xd01f mem 0xf7200000-0xf727ffff,0xf7280000-0xf7283fff irq 18 at device 0.0 on pci4 igb0: attach_pre capping queues at 4 igb0: using 1024 tx descriptors and 1024 rx descriptors igb0: msix_init qsets capped at 4 igb0: pxm cpus: 4 queue msgs: 4 admincnt: 1 igb0: using 4 rx queues 4 tx queues igb0: Using MSIX interrupts with 5 vectors igb0: allocated for 4 tx_queues igb0: allocated for 4 rx_queues igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib5 igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xc000-0xc01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 19 at device 0.0 on pci5 igb1: attach_pre capping queues at 4 igb1: using 1024 tx descriptors and 1024 rx descriptors igb1: msix_init qsets capped at 4 igb1: pxm cpus: 4 queue msgs: 4 admincnt: 1 igb1: using 4 rx queues 4 tx queues igb1: Using MSIX interrupts with 5 vectors igb1: allocated for 4 tx_queues igb1: allocated for 4 rx_queues igb1: Ethernet address: [_MAC_XXXXXXXXXX] igb1: netmap queues/slots: TX 4/1024, RX 4/1024 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7413000-0xf74133ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf030-0xf037,0xf020-0xf023,0xf000-0xf01f mem 0xf7412000-0xf74127ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 7 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounters tick every 1.000 msec ugen1.1: <Intel EHCI root HUB> at usbus1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST10000VX0004-1ZE101 AV01> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 9537536MB (19532873728 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <ST10000VX0004-1ZE101 AV01> ACS-3 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 9537536MB (19532873728 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <ST10000VX0004-1ZE101 AV01> ACS-3 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 9537536MB (19532873728 512 byte sectors) ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <ADATA ISMS331-064GMH P0831A> ACS-2 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXXXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada3: Command Queueing enabled ada3: 61057MB (125045424 512 byte sectors) ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 ada4: <ST10000VX0004-1ZE101 AV01> ACS-3 ATA SATA 3.x device ada4: [_SERIAL_NUMBER_XXXXX] ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 9537536MB (19532873728 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device Trying to mount root from ufs:/dev/ada3s1a [async,noatime,rw]... WARNING: / was not properly dismounted WARNING: /: mount pending error: blocks 104 files 1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub1: 21 ports with 21 removable, self powered ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub3 on uhub2 uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub4 on uhub0 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 uhub3: 6 ports with 6 removable, self powered ugen0.2: <vendor 0x0000 product 0x0001> at usbus0 uhub5 on uhub1 uhub5: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 1> on usbus0 uhub4: 6 ports with 6 removable, self powered uhub5: 4 ports with 3 removable, self powered ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 ukbd0 on uhub5 ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 kbd2 at ukbd0 ugen0.4: <Generic USB> at usbus0 ukbd1 on uhub1 ukbd1: <USB> on usbus0 kbd3 at ukbd1 ugen0.5: <SanDisk Ultra Fit> at usbus0 umass0 on uhub1 umass0: <SanDisk Ultra Fit, class 0/0, rev 3.00/1.00, addr 4> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc100 umass0:7:0: Attached to scbus7