Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-10 20:49:00
From: peterj
Description: FreeBSD-11/SPARC64 on SunBlade 1500
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2015 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #13 r287253M: Sun Aug 30 14:19:53 EST 2015
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/obj/usr/src/sys/sb1500 sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 4294967296 (4096 MB)
avail memory = 4193443840 (3999 MB)
cpu0: Sun Microsystems UltraSparc-IIIi Processor (1062.00 MHz CPU)
random: unblocking device.
random: entropy device external interface
nexus0: <Open Firmware Nexus device>
pcib0: <Sun Host-PCI bridge> mem 0x4000f600000-0x4000f60afff,0x4000f410000-0x4000f41701f,0x7fe00000000-0x7fe000000ff,0x4000f780000-0x4000f78ffff irq 1970,1968,1969,1972,1953 on nexus0
pcib0: Tomatillo, version 4, IGN 0x1e, bus A, PCI mode, 33MHz
pcib0: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <OFW PCI-PCI bridge> at device 2.0 on pci0
pci1: <OFW PCI bus> on pcib1
pcib2: <Sun Host-PCI bridge> mem 0x4000ff00000-0x4000ff0afff,0x4000fc10000-0x4000fc1701f,0x7f600000000-0x7f6000000ff,0x4000ff80000-0x4000ff8ffff irq 2035,2032,2033,2036,2019 on nexus0
pcib2: Tomatillo, version 4, IGN 0x1f, bus B, PCI mode, 66MHz
pcib2: DVMA map: 0xc0000000 to 0xdfffffff 65536 entries
pci2: <OFW PCI bus> on pcib2
nexus0: <memory-controller> mem 0x40000000000-0x40000000007 type memory-controller (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
pcib0: could not route pin 1 for device 7.0
isa0: could not map ISA interrupt 1 for node 0xf00971e0: parallel
isa0: <ISA bus> on isab0
alpm0: <AcerLabs M15x3 Power Management Unit> at device 6.0 on pci0
alpm0: Could not allocate Bus space
device_attach: alpm0 attach returned 6
pcm0: <Acer Labs M5451> port 0x900-0x9ff mem 0x100000-0x100fff at device 8.0 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
pcm0: [GIANT-LOCKED]
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x1000000-0x1000fff at device 10.0 on pci0
usbus0 on ohci0
ohci1: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0x2000000-0x2000fff at device 11.0 on pci0
usbus1 on ohci1
atapci0: <AcerLabs M5229 UDMA100 controller> port 0xa00-0xa07,0xa18-0xa1b,0xa10-0xa17,0xa08-0xa0b,0xa20-0xa2f at device 13.0 on pci0
atapci0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
ohci2: <NEC uPD 9210 USB controller> mem 0x3000000-0x3000fff at device 8.0 on pci1
usbus2 on ohci2
ohci3: <NEC uPD 9210 USB controller> mem 0x3002000-0x3002fff at device 8.1 on pci1
usbus3 on ohci3
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0x3004000-0x30040ff at device 8.2 on pci1
usbus4: EHCI version 1.0
usbus4 on ehci0
fwohci0: <Texas Instruments TSB43AB23> mem 0x3006000-0x30067ff,0x3008000-0x300bfff at device 11.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 [_MAC_XXXXXXXXXX]:4b:f0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: [_MAC_XXXXXXXXXX]:4b:f0 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xc15b4000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
jbusppm0: <JBus power management> mem 0x4000f000000-0x4000f000007,0x4000f410050-0x4000f41005f on nexus0
bge0: <Broadcom BCM5703 A2, ASIC rev. 0x001002> mem 0x200000-0x20ffff at device 2.0 on pci2
bge0: CHIP ID 0x00001002; ASIC REV 0x01; CHIP REV 0x10; PCI on PCI-X 66 MHz; 64bit
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
vgapci0: <VGA-compatible display> port 0x300-0x3ff mem 0x8000000-0xfffffff,0x100000-0x10ffff at device 3.0 on pci2
vgapci0: Boot video device
nexus0: <i2c> mem 0x4000fc64000-0x4000fc6400f type i2c (no driver attached)
rtc0: <Real-Time Clock> at port 0x70-0x71 on isa0
uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 44 on isa0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> at port 0x2e8-0x2ef irq 44 on isa0
Timecounter "tick" frequency 1062000000 Hz quality 1000
Timecounter "stick" frequency 12000000 Hz quality 1000
Event timer "tick" frequency 1062000000 Hz quality 1000
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <AcerLabs> at usbus0
uhub0: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <AcerLabs> at usbus1
uhub1: <AcerLabs OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
ugen2.1: <NEC> at usbus2
uhub2: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <NEC> at usbus3
uhub3: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4: 480Mbps High Speed USB v2.0
uhub0: 2 ports with 2 removable, self powered
ugen4.1: <NEC> at usbus4
uhub4: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub2: 3 ports with 3 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <JLMS XJ-HD166S D3S4> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
<ST380011A 8.01> ATA-6 device
ada0: [_SERIAL_NUMBER_XXXXX]
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
ada1 at ata2 bus 0 scbus0 target 1 lun 0
ada1: <ST380011A 8.01> ATA-6 device
ada1: [_SERIAL_NUMBER_XXXXX]
ada1: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada1: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad1
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
GEOM: ada1: adding VTOC8 information.
GEOM: diskid/DISK-4JV0W6AL: adding VTOC8 information.
Root mount waiting for: usbus4
uhub4: 5 ports with 5 removable, self powered
Trying to mount root from ufs:/dev/ada1a [rw]...