Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-05-11 13:38:52
From: tsutsui
Description: NetBSD/i386 -current 20190511 on VirtualBox 5.2.28 with ICH AC97 audio
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.0000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.0000000] 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 8.99.39 (GENERIC) #49: Sat May 11 22:17:40 JST 2019 [ 1.0000000] tsutsui@mirage:/usr/src/sys/arch/i386/compile/GENERIC [ 1.0000000] total memory = 1535 MB [ 1.0000000] avail memory = 1488 MB [ 1.0000000] timecounter: Timecounters tick every 10.000 msec [ 1.0000000] Kernelized RAIDframe activated [ 1.0000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.0000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.0000030] innotek GmbH VirtualBox (1.2) [ 1.0000030] mainbus0 (root) [ 1.0000030] ACPI: RSDP 0x00000000000E0000 000024 (v02 VBOX ) [ 1.0000030] ACPI: XSDT 0x000000005FFF0030 000034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061) [ 1.0000030] ACPI: FACP 0x000000005FFF00F0 0000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061) [ 1.0000030] ACPI: DSDT 0x000000005FFF0410 0021FF (v02 VBOX VBOXBIOS 00000002 INTL 20100528) [ 1.0000030] ACPI: FACS 0x000000005FFF0200 000040 [ 1.0000030] ACPI: SSDT 0x000000005FFF0240 0001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528) [ 1.0000030] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.0000030] cpu0 at mainbus0 [ 1.0000030] cpu0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz, id 0x10676 [ 1.0000030] cpu0: package 0, core 0, smt 0 [ 1.0000030] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.0000030] acpi0: X/RSDT: OemId <VBOX ,VBOXXSDT,00000001>, AslId <ASL ,00000061> [ 1.0000030] LNKB: ACPI: Found matching pin for 0.2.INTA at func 0: 10 [ 1.0000030] LNKC: ACPI: Found matching pin for 0.3.INTA at func 0: 9 [ 1.0000030] LNKD: ACPI: Found matching pin for 0.4.INTA at func 0: 11 [ 1.0000030] LNKA: ACPI: Found matching pin for 0.5.INTA at func 0: 11 [ 1.0000030] LNKB: ACPI: Found matching pin for 0.6.INTA at func 0: 10 [ 1.0000030] LNKC: ACPI: Found matching pin for 0.7.INTA at func 0: 9 [ 1.0000030] acpi0: SCI interrupting at int 9 [ 1.0000030] acpi0: fixed power button present [ 1.0000030] acpi0: fixed sleep button present [ 1.0000030] timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900 [ 1.0085021] pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.0085021] pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12 [ 1.0085021] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 [ 1.0085021] acpivga0 at acpi0 (GFX0): ACPI Display Adapter [ 1.0085021] acpiout0 at acpivga0 (VGA, 0x0100): ACPI Display Output Device [ 1.0085021] acpivga0: connected output devices: [ 1.0085021] acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0 [ 1.0085021] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter [ 1.0085021] apm0 at acpi0: Power Management spec V1.2 [ 1.0085021] ACPI: Enabled 2 GPEs in block 00 to 07 [ 1.0085021] pckbd0 at pckbc1 (kbd slot) [ 1.0085021] pckbc1: using irq 1 for kbd slot [ 1.0085021] wskbd0 at pckbd0: console keyboard [ 1.0085021] pms0 at pckbc1 (aux slot) [ 1.0085021] pckbc1: using irq 12 for aux slot [ 1.0085021] wsmouse0 at pms0 mux 0 [ 1.0085021] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.0085021] pci0: This pci host supports neither MSI nor MSI-X. [ 1.0085021] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.0085021] pchb0 at pci0 dev 0 function 0: vendor 8086 product 1237 (rev. 0x02) [ 1.0085021] pcib0 at pci0 dev 1 function 0: vendor 8086 product 7000 (rev. 0x00) [ 1.0085021] piixide0 at pci0 dev 1 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01) [ 1.0085021] piixide0: bus-master DMA support present [ 1.0085021] piixide0: primary channel configured to compatibility mode [ 1.0085021] piixide0: primary channel interrupting at irq 14 [ 1.0085021] atabus0 at piixide0 channel 0 [ 1.0085021] piixide0: secondary channel configured to compatibility mode [ 1.0085021] piixide0: secondary channel interrupting at irq 15 [ 1.0085021] atabus1 at piixide0 channel 1 [ 1.0085021] vga0 at pci0 dev 2 function 0: vendor 80ee product beef (rev. 0x00) [ 1.0085021] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 [ 1.0085021] wsmux1: connecting to wsdisplay0 [ 1.0085021] drm at vga0 not configured [ 1.0085021] wm0 at pci0 dev 3 function 0: Intel i82540EM 1000BASE-T Ethernet (rev. 0x02) [ 1.0085021] wm0: interrupting at irq 9 [ 1.0085021] wm0: 32-bit 33MHz PCI bus [ 1.0085021] wm0: 64 words (6 address bits) MicroWire EEPROM [ 1.0085021] wm0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0085021] wm0: 0x402<LOCK_EECD,IOH_VALID> [ 1.0085021] makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 4 [ 1.0085021] makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0085021] vendor 80ee product cafe (miscellaneous system) at pci0 dev 4 function 0 not configured [ 1.0085021] auich0 at pci0 dev 5 function 0: i82801AA (ICH) AC-97 Audio [ 1.0085021] auich0: interrupting at irq 11 [ 1.0085021] auich0: ac97: SigmaTel STAC9700 codec; no 3D stereo [ 1.0085021] auich0: ac97: ext id 0x800<AC97_23> [ 1.0085021] ohci0 at pci0 dev 6 function 0: vendor 106b product 003f (rev. 0x00) [ 1.0085021] ohci0: interrupting at irq 10 [ 1.0085021] ohci0: OHCI version 1.0 [ 1.0085021] usb0 at ohci0: USB revision 1.0 [ 1.0085021] piixpm0 at pci0 dev 7 function 0: vendor 8086 product 7113 (rev. 0x08) [ 1.0085021] piixpm0: interrupting at irq 9 [ 1.0085021] iic0 at piixpm0: I2C bus [ 1.0085021] isa0 at pcib0 [ 1.0085021] pcppi0 at isa0 port 0x61 [ 1.0085021] midi0 at pcppi0: PC speaker [ 1.0085021] sysbeep0 at pcppi0 [ 1.0085021] isapnp0 at isa0 port 0x279 [ 1.0085021] attimer1: attached to pcppi0 [ 1.0085021] isapnp0: no ISA Plug 'n Play devices found [ 1.0085021] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.3016835] acpiacad0: AC adapter online. [ 1.3101410] audio0 at auich0: full duplex, playback, capture, mmap, independent [ 1.3101410] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback [ 1.3248418] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording [ 1.3304805] IPsec: Initialized Security Association Processing. [ 1.3401588] uhub0 at usb0: NetBSD (0000) OHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.3401588] uhub0: 12 ports with 12 removable, self powered [ 4.3104195] wd0 at atabus0 drive 0 [ 4.3104195] wd0: <VBOX HARDDISK> [ 4.3104195] wd0: drive supports 128-sector PIO transfers, LBA addressing [ 4.3104195] wd0: 5120 MB, 10402 cyl, 16 head, 63 sec, 512 bytes/sect x 10485760 sectors [ 4.3306297] wd0: 32-bit data port [ 4.3306297] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) [ 4.3306297] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 4.3306297] atapibus0 at atabus1: 2 targets [ 4.3306297] cd0 at atapibus0 drive 0: <VBOX CD-ROM, VB2-01700376, 1.0> cdrom removable [ 4.3414782] cd0: 32-bit data port [ 4.3414782] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) [ 4.3414782] cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 4.3414782] boot device: wd0 [ 4.3414782] root on wd0a dumps on wd0b [ 4.3505693] root file system type: ffs [ 4.3505693] kern.module.path=/stand/i386/8.99.39/modules [ 15.2603506] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 15.2603506] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 15.2711243] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 15.2711243] wsdisplay0: screen 4 added (80x25, vt100 emulation) [ 285.8244181] audio0: device timeout [ 288.8244754] audio0: device timeout [ 291.8247777] audio0: device timeout [ 294.8245592] audio0: device timeout [ 359.2164355] audio0: device timeout [ 362.2156354] audio0: device timeout [ 365.2156338] audio0: device timeout [ 368.2157301] audio0: device timeout