Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-05-12 05:13:32
From: yamori813
Description: DB120 NG
***************************************
* U-Boot 1.1.4-c932960b-clean *
* Build: 2019-05-12 *
***************************************
** Warning: bad env CRC, using default,
use 'saveenv' to save it in FLASH
BOARD: TP-Link TL-WR1041N v2
SOC: AR9342 rev. 3
CPU: MIPS 74Kc
RAM: 64 MB DDR2 16-bit CL3-4-4-10
FLASH: 4 MB Macronix MX25L320
MAC: [_MAC_XXXXXXXXXX]
CLOCKS: CPU/RAM/AHB/SPI/REF
400/400/200/ 20/ 40 MHz
Keep button pressed for at least:
- 3s for web based recovery
- 5s for U-Boot console
- 7s for network console
. . . . . . . . . . 0xA seconds
## Error: 10s limit reached!
Continuing normal boot...
Hit any key to stop booting: 0
Booting image from 0x9F020000...
Vendor/image name: ZRouter.org 0.1-ALPHA
Hardware ID: 0x4700001
Whole image size: 15.5 MB (16252928 bytes)
Kernel size: 1.1 MB (1113600 bytes)
Rootfs size: 2.2 MB (2336256 bytes)
Kernel load address: 0x80050120
Kernel entry point: 0x80050120
Header CRC... skipped
Data CRC... skipped
Stopping network... OK!
Uncompressing Kernel... OK!
Starting kernel...
CPU platform: Atheros AR9342 rev 3
CPU Frequency=400 MHz
CPU DDR Frequency=400 MHz
CPU AHB Frequency=200 MHz
platform frequency: 400 MHz
CPU reference clock: 40 MHz
CPU MDIO clock: 100 MHz
arguments:
a0 = 00000007
a1 = a3ecafac
a2 = 04000000
a3 = 00000004
Cmd line:argv is invalid
Environment:
envp is invalid
Cache info:
picache_stride = 4096
picache_loopcount = 16
pdcache_stride = 4096
pdcache_loopcount = 8
max line size = 32
cpu0: MIPS Technologies processor v76.151
MMU: Standard TLB, 32 entries (4K 16K 64K 256K 1M 16M 64M 256M pg sizes)
L1 i-cache: 4 ways of 512 sets, 32 bytes per line
L1 d-cache: 4 ways of 256 sets, 32 bytes per line
L2 cache: disabled
Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG>
Config2=0x80001000
Config3=0x2c20<ULRI>
Config7=0x80000800<WII>
Physical memory chunk(s):
0x401000 - 0x3ffffff, 62910464 bytes (15359 pages)
Maxmem is 0x4000000
---<<BOOT>>---
ar934x_chip_init_gmac: gmac_cfg=0x00000041
ar934x_configure_gmac: ETH_CFG=0x00000001
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #7 896bf9a9272(zrouter)-dirty: Sun May 12 14:04:51 JST 2019
hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/mips.mips/sys/Nec_WG300HP mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x803fabc0.
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x0048d000 - 0x03ef3fff, 61239296 bytes (14951 pages)
avail memory = 60485632 (57MB)
__stack_chk_init: WARNING: Initializing stack protection with non-random cookies!
__stack_chk_init: WARNING: This severely limits the benefit of -fstack-protector!
random: entropy device external interface
mem: <memory>
null: <full device, null device, zero device>
nexus0: <MIPS32 root nexus>
argemdio0: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x19000000-0x19000fff on nexus0
mdio0: <MDIO> on argemdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 200000000 Hz quality 800
Event timer "MIPS32" frequency 200000000 Hz quality 800
argemdio1: <Atheros AR71xx built-in ethernet interface, MDIO controller> at mem 0x1a000000-0x1a000fff on nexus0
mdio1: <MDIO> on argemdio1
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
arswitch0: <Atheros AR9340 Ethernet Switch (ver 0 rev 0)> on mdio1
arswitch0: ar9340_hw_global_setup: GMII
arswitch0: ar9340_hw_global_setup: PHY4 - CPU
miibus0: <MII bus> on arswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x00c82e, model 0x0004, rev. 2
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus1: <MII bus> on arswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x00c82e, model 0x0004, rev. 2
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus2: <MII bus> on arswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x00c82e, model 0x0004, rev. 2
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus3: <MII bus> on arswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x00c82e, model 0x0004, rev. 2
ukphy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
mdio2: <MDIO> on arswitch0
mdioproxy2: <MII/MDIO proxy, MDIO side> on mdio2
etherswitch0: <Switch controller> on arswitch0
arswitch1: <Atheros AR8226 Ethernet Switch (ver 1 rev 1)> on mdio1
miibus4: <MII bus> on arswitch1
ukphy4: <Generic IEEE 802.3u media interface> PHY 0 on miibus4
ukphy4: OUI 0x00c82e, model 0x0004, rev. 2
ukphy4: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus5: <MII bus> on arswitch1
ukphy5: <Generic IEEE 802.3u media interface> PHY 1 on miibus5
ukphy5: OUI 0x00c82e, model 0x0004, rev. 2
ukphy5: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus6: <MII bus> on arswitch1
ukphy6: <Generic IEEE 802.3u media interface> PHY 2 on miibus6
ukphy6: OUI 0x00c82e, model 0x0004, rev. 2
ukphy6: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus7: <MII bus> on arswitch1
ukphy7: <Generic IEEE 802.3u media interface> PHY 3 on miibus7
ukphy7: OUI 0x00c82e, model 0x0004, rev. 2
ukphy7: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
miibus8: <MII bus> on arswitch1
ukphy8: <Generic IEEE 802.3u media interface> PHY 4 on miibus8
ukphy8: OUI 0x00c82e, model 0x0004, rev. 2
ukphy8: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
mdio3: <MDIO> on arswitch1
mdioproxy3: <MII/MDIO proxy, MDIO side> on mdio3
etherswitch1: <Switch controller> on arswitch1
apb0 at irq 4 on nexus0
uart0: <16550 or compatible> at mem 0x18020003-0x1802001a irq 3 on apb0
uart0: console (115200,n,8,1)
uart0: fast interrupt
uart0: PPS capture mode: DCD
gpio0: <Atheros AR71XX GPIO driver> at mem 0x18040000-0x18040fff irq 2 on apb0
gpio0: [GIANT-LOCKED]
gpio0: function_set: 0x0
gpio0: function_clear: 0x0
gpio0: gpio pinmask=0x7da000
gpiobus0: <GPIO bus> on gpio0
gpioled0: <GPIO led> at pin 15 on gpiobus0
gpioled1: <GPIO led> at pin 13 on gpiobus0
gpioled2: <GPIO led> at pin 18 on gpiobus0
gpioc0: <GPIO controller> on gpio0
arge0: <Atheros AR71xx built-in ethernet interface> at mem 0x19000000-0x19000fff irq 2 on nexus0
arge0: Overriding MAC address from environment: '[_MAC_XXXXXXXXXX]'
miiproxy0: <MII/MDIO proxy, MII side> on arge0
miiproxy0: attached to target mdio2
arge0: finishing attachment, phymask 0010, proxy set
miibus9: <MII bus> on miiproxy0
ukphy9: <Generic IEEE 802.3u media interface> PHY 4 on miibus9
ukphy9: OUI 0x00c82e, model 0x0004, rev. 2
ukphy9: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
arge0: bpf attached
arge0: Ethernet address: [_MAC_XXXXXXXXXX]
arge1: <Atheros AR71xx built-in ethernet interface> at mem 0x1a000000-0x1a000fff irq 3 on nexus0
arge1: Overriding MAC address from environment: '[_MAC_XXXXXXXXXX]'
arge1: arge_attach: overriding MII mode to 'GMII'
mii_attach_proxy: not attaching, no mdio device hint for arge1
arge1: finishing attachment, phymask 0000, proxy null
arge1: bpf attached
arge1: Ethernet address: [_MAC_XXXXXXXXXX]
spi0: <AR71XX SPI> at mem 0x1f000000-0x1f00000f on nexus0
spibus0: <SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll32, size 4096K in 64 sectors of 64K, erase size 64K
ehci0: <AR71XX Integrated USB 2.0 controller> at mem 0x1b000100-0x1bffffff irq 1 on nexus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
ar71xx_wdog0: <Atheros AR71XX watchdog timer> on nexus0
Device configuration finished.
Timecounters tick every 1.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 1024
arswitch0port1: link state changed to DOWN
arswitch0port2: link state changed to DOWN
arswitch0port3: link state changed to DOWN
arswitch0port4: link state changed to DOWN
arswitch1port1: link state changed to DOWN
arswitch1port2: link state changed to DOWN
arswitch1port3: link state changed to DOWN
arswitch1port4: link state changed to DOWN
arswitch1port5: link state changed to DOWN
GEOM: new disk flash/spi0
usbus0: 480Mbps High Speed USB v2.0
MAP: flash/spi0: 0x20000, data=0x20000 "/dev/map/bootloader"
MAP: flash/spi0: 20000x3c0000, data=0x3c0000 "/dev/map/upgrade"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
ugen0.1: <Atheros EHCI root HUB> at usbus0
uhub0: <Atheros EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
MAP: flash/spi0: 20000x110000, data=0x110000 "/dev/map/kernel"
MAP: search flash/spi0 for key ".!/bin/sh" from 0x100000, step 0x10000
MAP: flash/spi0: 130000x2b0000, data=0x2b0000 "/dev/map/rootfs"
MAP: flash/spi0: 3f0000x10000, data=0x10000 "/dev/map/ART"
MAP: No valid partition found at map/rootfs.uzip
Trying to mount root from cd9660:/dev/map/rootfs.uzip []...
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0409 product 0x005a> at usbus0
uhub1: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
gpio_pin_set_flags: Invalid argument
kenv: unable to get HostName
kern.coredump: 1 -> 0
net.inet.ip.forwarding: 0 -> 1
memory disk size = 10m
MAP: No valid partition found at md0
random: unblocking device.
MAP: No valid partition found at md0
lo0: link state changed to UP
Thu Jan 1 00:00:41 UTC 1970