Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].

Date: 2019-05-22 08:19:35
From: yamori813
Description: Pcduino_Lite
ARM Debug Architecture not supported
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #61 4a3e7e7ca38(zrouter)-dirty: Wed May 22 04:31:33 JST 2019
    hiroki@zrouter:/usr/home/hiroki/zobj/usr/home/hiroki/ZRouter/tmp/usr/home/hiroki/freebsd/arm.armv7/sys/Pcduino_Lite arm
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000)
CPU Features: 
  Thumb2, Security, VMSAv7
Optional instructions: 
LoUU:2 LoC:3 LoUIS:1 
Cache level 1:
 32KB/64B 4-way data cache WT WB Read-Alloc
 32KB/64B 4-way instruction cache Read-Alloc
Cache level 2:
 256KB/64B 8-way unified cache WT WB Read-Alloc Write-Alloc
real memory  = 536870912 (512 MB)
avail memory = 520138752 (496 MB)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
ofwbus0: <Open Firmware Device Tree>
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
ccu_a10ng0: <Allwinner A10/A20 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c23800-0x1c2380f on simplebus0
aintc0: <A10 AINTC Interrupt Controller> mem 0x1c20400-0x1c207ff on simplebus0
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 21 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 0x1c2ac00-0x1c2afff irq 41 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
iichb1: <Allwinner Integrated I2C Bus Controller> mem 0x1c2b400-0x1c2b7ff irq 43 on simplebus0
iicbus1: <OFW I2C bus> on iichb1
a10_timer0: <Allwinner timer> mem 0x1c20c00-0x1c20c8f irq 22 on simplebus0
Event timer "a10_timer Eventtimer" frequency 24000000 Hz quality 1000
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 1000
awusbphy0: <Allwinner USB PHY> mem 0x1c13400-0x1c1340f,0x1c14800-0x1c14803,0x1c1c800-0x1c1c803 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
emac0: <A10/A20 EMAC ethernet controller> mem 0x1c0b000-0x1c0bfff irq 4 on simplebus0
miibus0: <MII bus> on emac0
rlphy0: <IP101 10/100 PHY> PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
emac0: Ethernet address: xx:xx:xx:xx:xx:xx
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 7 on simplebus0
mmc0: <MMC/SD bus> on aw_mmc0
ohci0: <Generic OHCI Controller> mem 0x1c14400-0x1c144ff irq 13 on simplebus0
usbus0 on ohci0
ohci1: <Generic OHCI Controller> mem 0x1c1c400-0x1c1c4ff irq 19 on simplebus0
usbus1 on ohci1
gpioc0: <GPIO controller> on gpio0
aw_wdog0: <Allwinner A10 Watchdog> mem 0x1c20c90-0x1c20c9f on simplebus0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 31 on simplebus0
uart0: console (115384,n,8,1)
iicbus0: <unknown card> at addr 0x68
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
gpioled0: <GPIO LEDs> on ofwbus0
Timecounters tick every 10.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
ugen0.1: <Generic OHCI root HUB> at usbus0
uhub0: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
mmcsd0: 8GB <SDHC SA08G 0.4 SN 9C800172 MFG 05/2010 by 2 TM> at mmc0 50.0MHz/4bit/4096-block
Trying to mount root from cd9660:/dev/mmcsd0s2 []...
mmc0: Failed to set VCCQ for card at relative address 4660
WARNING: geom_mbr (geom mmcsd0) is deprecated, use gpart instead.
Warning: no time-of-day clock registered, system time will not be set accurately
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
random: randomdev_wait_until_seeded unblock wait
random: randomdev_wait_until_seeded unblock wait
random: unblocking device.
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME
emac0: link state changed to UP