Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-05-22 13:36:34
From: hbent
Description: HP Elite 8300 Small Form Factor
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0 (AELFRIC) #0: Tue Dec 29 12:28:45 EST 2015
root@aelfric:/usr/src/sys/arch/amd64/compile/AELFRIC
total memory = 8066 MB
avail memory = 7822 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 1.000 msec
RTC BIOS diagnostic error 0x10<memory_size>
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Hewlett-Packard HP Compaq Elite 8300 SFF
mainbus0 (root)
ACPI: RSDP 0xf9810 000024 (v02 HPQOEM)
ACPI: XSDT 0xd8a01088 000094 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013)
ACPI: FACP 0xd8a0b638 00010C (v05 HPQOEM SLIC-BPC 01072009 AMI 00010013)
ACPI: DSDT 0xd8a011b0 00A485 (v02 HPQOEM SLIC-BPC 00000017 INTL 20051117)
ACPI: FACS 0xd8be7080 000040
ACPI: APIC 0xd8a0b748 000072 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013)
ACPI: FPDT 0xd8a0b7c0 000044 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013)
ACPI: MCFG 0xd8a0b808 00003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
ACPI: HPET 0xd8a0b848 000038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000005)
ACPI: SSDT 0xd8a0b880 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: MSDM 0xd8a0bbf0 000055 (v03 HPQOEM SLIC-BPC 01072009 HPQ 00010013)
ACPI: SSDT 0xd8a0bc48 00668F (v01 COMPAQ WMI 00000001 MSFT 03000001)
ACPI: SLIC 0xd8a122d8 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: SSDT 0xd8a12450 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0xd8a12e00 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: TCPA 0xd8a13898 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
ACPI: DMAR 0xd8a138d0 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
ACPI: ASF! 0xd8a13988 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: All ACPI Tables successfully acquired
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz, id 0x306a9
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <HPQOEM,SLIC-BPC,01072009>, AslId <AMI ,00010013>
ACPI: SSDT 0xd8a4a018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x0 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0xd8a4ba98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 0xd8a4cc18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: SSDT 0x0 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
attimer0 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
pckbc0 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
RMSC (PNP0C02) at acpi0 not configured
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, working fifo
lpt0 at acpi0 (LPTE, PNP0401): io 0x378-0x37f,0x778-0x77f irq 7 drq 1
tpm0 at acpi0 (TPM, IFX0102-1): mem 0xfed40000-0xfed44fff
: IFX SLB 9635 TT 1.2 rev 0x10
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
MEM2 (PNP0C01) at acpi0 not configured
acpiwmi0 at acpi0 (WMID, PNP0C14-0): ACPI WMI Interface
wmihp0 at acpiwmi0: HP WMI mappings
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 71.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 0.0C
acpitz0: active cooling level 3: 0.0C
acpitz0: active cooling level 4: 0.0C
acpitz0: levels: critical 105.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3
acpitz1: levels: critical 105.0 C, passive 95.0 C, passive cooling
ACPI: Enabled 4 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0150 (rev. 0x09)
i915drmkms0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0162 (rev. 0x09)
drm: Memory usable by graphics device = 2048M
drm: Supports vblank timestamp caching Rev 2 (21.10.2013).
drm: Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at ioapic0 pin 16 (i915)
intelfb0 at i915drmkms0
i915drmkms0: info: registered panic notifier
intelfb0: framebuffer at 0xffff80008dd4f000, size 1920x1080, depth 32, stride 7680
DRM error in cpt_serr_int_handler: PCH transcoder A FIFO underrun
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
xhci0 at pci0 dev 20 function 0: vendor 0x8086 product 0x1e31 (rev. 0x04)
xhci0: interrupting at ioapic0 pin 16
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 2.0
vendor 0x8086 product 0x1e3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3: Intel 7 Series KT (com)
com1 at puc0 port 0 (16550-compatible): ioaddr 0xf0e0, interrupting at ioapic0 pin 19
com1: ns16550a, working fifo
wm0 at pci0 dev 25 function 0: PCH2 LAN (82579LM) Controller (rev. 0x04)
wm0: interrupting at ioapic0 pin 20
wm0: PCI-Express bus
wm0: 2048 words FLASH
wm0: Ethernet address [_MAC_XXXXXXXXXX]
ihphy0 at wm0 phy 2: i82579 10/100/1000 media interface, rev. 3
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1e2d (rev. 0x04)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb1 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Realtek product 0x0221
hdafg0: DAC00 2ch: Speaker [Built-In]
hdafg0: DAC01 2ch: Speaker [Jack], HP Out [Jack]
hdafg0: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
hdafg1 at hdaudio0: Intel product 0x2806
hdafg1: DP00 8ch: Digital Out [Jack]
hdafg1: 8ch/0ch 48000Hz PCM16*
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1e26 (rev. 0x04)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb2 at ehci1: USB revision 2.0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xa4)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1e47 (rev. 0x04)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x1e02 (rev. 0x04)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xcf30ff65<SXS,EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 4
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1e22 (rev. 0x04)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50: EBJ41UF8BDW0-GN-F 0 ^BM-~
spdmem0: DDR3 SDRAM, no ECC, no temp-sensor, 4GB, 1600MHz (PC3-12800)
spdmem0: 12 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.250ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 10-10-10-28
spdmem1 at iic0 addr 0x52: BLS4G3D1609DS1S00.^A
spdmem1: DDR3 SDRAM, no ECC, no temp-sensor, 4GB, 1600MHz (PC3-12800)
spdmem1: 12 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.250ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 9-9-9-24
isa0 at ichlpcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 59 us, pow 500 mW
acpicpu0: C3: FFH, lat 80 us, pow 350 mW
acpicpu0: P0: FFH, lat 10 us, pow 77000 mW, 3401 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 77000 mW, 3400 MHz
acpicpu0: P2: FFH, lat 10 us, pow 73840 mW, 3300 MHz
acpicpu0: P3: FFH, lat 10 us, pow 67694 mW, 3100 MHz
acpicpu0: P4: FFH, lat 10 us, pow 64705 mW, 3000 MHz
acpicpu0: P5: FFH, lat 10 us, pow 61772 mW, 2900 MHz
acpicpu0: P6: FFH, lat 10 us, pow 58907 mW, 2800 MHz
acpicpu0: P7: FFH, lat 10 us, pow 53315 mW, 2600 MHz
acpicpu0: P8: FFH, lat 10 us, pow 50601 mW, 2500 MHz
acpicpu0: P9: FFH, lat 10 us, pow 47940 mW, 2400 MHz
acpicpu0: P10: FFH, lat 10 us, pow 42787 mW, 2200 MHz
acpicpu0: P11: FFH, lat 10 us, pow 40284 mW, 2100 MHz
acpicpu0: P12: FFH, lat 10 us, pow 37833 mW, 2000 MHz
acpicpu0: P13: FFH, lat 10 us, pow 35433 mW, 1900 MHz
acpicpu0: P14: FFH, lat 10 us, pow 31421 mW, 1700 MHz
acpicpu0: P15: FFH, lat 10 us, pow 29164 mW, 1600 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=105
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=105
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=105
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=105
timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0
timecounter: Timecounter "TSC" frequency 3392596800 Hz quality 3000
xhci0: xhci_new_device up 0xfffffe810e661278 portno 0
xhci0: xhci_new_device hub 0xfffffe810f684348
xhci0: xhci_new_device hub 0x0
xhci0: xhci_new_device rhport 0
xhci0: xhci_open addr 0 depth 0 port 0 speed 3
uhub0 at usb0: NetBSD xHCI Root Hub, class 9/0, rev 2.00/1.00, addr 0
uhub0: 4 ports with 4 removable, self powered
xhci0: xhci_open addr 0 depth 0 port 0 speed 3
IPsec: Initialized Security Association Processing.
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
xhci0: root_hub 0x0
drm: Enabling RC6 states: RC6 on, RC6p on, RC6pp off
wd0 at atabus0 drive 0
wd0: <INTEL SSDSA2M040G2GC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD40EZRZ-00WN9B0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 3725 GB, 7751955 cyl, 16 head, 63 sec, 512 bytes/sect x 7813971633 sectors
wd1: GPT GUID: b4cd47de-d1a5-48d6-83b7-37f7c8f201b4
dk0 at wd1: 324c88fb-c2a2-4887-bd49-fc7df18ee79c
dk0: 4678316672 blocks at 40, type: ffs
dk1 at wd1: e4945b59-f84d-4f0d-976e-e4a2b38c1750
dk1: 1559438896 blocks at 4678316712, type: ffs
dk2 at wd1: a8453a4c-927b-4e67-8472-7e152516dc7d
dk2: 1559438896 blocks at 6237755608, type: ffs
dk3 at wd1: e014d690-65ea-4d6c-8425-4373d5be2650
dk3: 16777096 blocks at 7797194504, type: swap
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <WDC WD30EZRX-00D8PB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 2794 GB, 5814021 cyl, 16 head, 63 sec, 512 bytes/sect x 5860533168 sectors
wd2: GPT GUID: bb7c11d0-6f19-41d2-98a9-c31abf6f5295
dk4 at wd2: 81e0a38c-cd58-4294-b483-d4d5367a55bf
dk4: 5860533088 blocks at 40, type: ffs
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub3 at uhub2 port 1: Intel Rate Matching Hub, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub4 at uhub1 port 1: Intel Rate Matching Hub, class 9/0, rev 2.00/0.00, addr 2
uhub4: single transaction translator
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub4 port 5 configuration 1 interface 0
uhidev0: vendor 0x192f USB Optical Mouse, rev 2.00/2.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0e dumps on wd0b
root file system type: ffs