Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].
Date: 2019-05-24 23:31:59
From: tho
Description: NetBSD/evbarm 8.99.41 on Hardkernel ODROID-C1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 8.99.41 (GENERIC) #0: Mon May 20 11:12:10 UTC 2019 [_EMAIL_XX]:/usr/src/sys/arch/evbarm/compile/GENERIC total memory = 1024 MB avail memory = 1003 MB timecounter: Timecounters tick every 10.000 msec armfdt0 (root) simplebus0 at armfdt0: Hardkernel ODROID-C1 simplebus1 at simplebus0 cpus0 at simplebus0 simplebus2 at simplebus0 cpu0 at cpus0: Cortex-A5 r0p1 (Cortex V7A core) cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu0: 32KB/32B 2-way L1 VIPT Instruction cache cpu0: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache cpu0: 512KB/32B 8-way write-back L2 PIPT Unified cache vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpufreqdt0 at cpu0 cpu1 at cpus0 cpufreqdt1 at cpu1 cpu2 at cpus0 cpufreqdt2 at cpu2 cpu3 at cpus0 cpufreqdt3 at cpu3 simplebus3 at simplebus1 simplebus4 at simplebus1 simplebus5 at simplebus1 gic0 at simplebus0: GIC armgic0 at gic0: Generic Interrupt Controller, 256 sources (245 valid) armgic0: 32 Priorities, 224 SPIs, 5 PPIs, 16 SGIs syscon0 at simplebus3: System Controller Registers syscon1 at simplebus3: System Controller Registers syscon2 at simplebus4: System Controller Registers syscon3 at simplebus1: System Controller Registers meson8bclkc0 at simplebus3: Meson8b clock controller mesonpinctrl0 at simplebus3: Meson8b CBUS GPIO gpio0 at mesonpinctrl0: 71 pins mesonresets0 at simplebus3 mesonpinctrl1 at simplebus4: Meson8b AO GPIO mesonpinctrl1: usb-hub-reset GPIOAO_4 set to output (high) gpio1 at mesonpinctrl1: 14 pins l2cc0 at simplebus0 arml2cc0 at l2cc0: ARM PL310 r3p3 L2 Cache Controller (disabled) arml2cc0: cache enabled a9tmr0 at simplebus0 a9tmr0: interrupting on GIC irq 27 arma9tmr0 at a9tmr0: A5 Global 64-bit Timer (300 MHz) gregulator0 at simplebus0: TF_IO fregulator0 at simplebus0: VCC1V8 fregulator1 at simplebus0: TFLASH_VDD fregulator2 at simplebus0: VCC3V3 fregulator3 at simplebus0: P5V0 fregulator4 at simplebus0: DDR_VDDC fregulator5 at simplebus0: VDD_RTC mesonusbphy0 at simplebus3: USB2 PHY (host) awge0 at simplebus1: Gigabit Ethernet Controller awge0: interrupting on GIC irq 40 awge0: Core version: 00001037 awge0: autoconfiguration error: reset timed out mesonrng0 at simplebus3: Hardware RNG mesonsdio0 at simplebus3: SDIO controller (port B) mesonsdio0: interrupting on GIC irq 60 mesonsdio0: core 159375000 Hz, clkin 159375000 Hz mesonwdt0 at simplebus3: EE-watchdog mesonsdhc0 at simplebus3: SDHC controller (port C) mesonsdhc0: interrupting on GIC irq 110 mesonsdhc0: core 159375000 Hz, clkin 850000000 Hz mesonuart0 at simplebus4: console mesonuart0: interrupting on GIC irq 122 mesonrtc0 at simplebus4: RTC dwctwo0 at simplebus1: DesignWare USB2 OTG dwctwo0: interrupting on GIC irq 63 mesonfb0 at simplebus0 mesonfb0: framebuffer at 0x9a100000, size 1280x720, depth 16, stride 2560 wsdisplay0 at mesonfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 wsdisplay0: screen 1-3 added (default, vt100 emulation) armpmu0 at simplebus0: Performance Monitor Unit gpioleds0 at simplebus0: c1:blue:alive timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "arma9tmr0" frequency 300000000 Hz quality 500 cpu1: Cortex-A5 r0p1 (Cortex V7A core) cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu1: 32KB/32B 2-way L1 VIPT Instruction cache cpu1: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache cpu1: 512KB/32B 8-way write-back L2 PIPT Unified cache vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpu2: Cortex-A5 r0p1 (Cortex V7A core) cpu2: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu2: 32KB/32B 2-way L1 VIPT Instruction cache cpu2: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache cpu2: 512KB/32B 8-way write-back L2 PIPT Unified cache vfp2 at cpu2: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpu3: Cortex-A5 r0p1 (Cortex V7A core) cpu3: DC enabled IC enabled WB enabled LABT branch prediction enabled cpu3: 32KB/32B 2-way L1 VIPT Instruction cache cpu3: 32KB/32B 4-way write-back-locking-C L1 PIPT Data cache cpu3: 512KB/32B 8-way write-back L2 PIPT Unified cache vfp3 at cpu3: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals cpufreqdt0: autoconfiguration error: couldn't acquire cpu-supply cpufreqdt1: 96.000 MHz, 860000 uV cpufreqdt1: 192.000 MHz, 860000 uV cpufreqdt1: 312.000 MHz, 860000 uV cpufreqdt1: 408.000 MHz, 860000 uV cpufreqdt1: 504.000 MHz, 860000 uV cpufreqdt1: 600.000 MHz, 860000 uV cpufreqdt1: 720.000 MHz, 860000 uV cpufreqdt1: 816.000 MHz, 900000 uV cpufreqdt1: 1008.000 MHz, 1140000 uV cpufreqdt1: 1200.000 MHz, 1140000 uV cpufreqdt1: 1320.000 MHz, 1140000 uV cpufreqdt1: 1488.000 MHz, 1140000 uV cpufreqdt1: 1536.000 MHz, 1140000 uV sdmmc0 at mesonsdio0 sdmmc1 at mesonsdhc0 dwctwo0: Core Release: 3.10a (snpsid=4f54310a) usb0 at dwctwo0: USB revision 2.0 armpmu0: interrupting on GIC irq 169 armpmu0: interrupting on GIC irq 170 armpmu0: interrupting on GIC irq 185 armpmu0: interrupting on GIC irq 186 uhub0 at usb0: NetBSD (0000) DWC2 root hub (0000), class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered IPsec: Initialized Security Association Processing. ld1 at sdmmc1: <0x45:0x0100:SDW16G:0x00:0x1e12a058:0x000> ld1: 15028 MB, 7633 cyl, 64 head, 63 sec, 512 bytes/sect x 30777344 sectors ld1: 8-bit width, HS200, 4096 KB cache, 200.000 MHz uhub1 at uhub0 port 1: vendor 05e3 (0x5e3) USB2.0 Hub (0x610), class 9/0, rev 2.00/32.98, addr 2 uhub1: multiple transaction translators uhub1: 4 ports with 4 removable, self powered urtwn0 at uhub1 port 1 urtwn0: Realtek (0xbda) 802.11n WLAN Adapter (0x8176), rev 2.00/2.00, addr 3 urtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R, address xx:xx:xx:xx:xx:xx urtwn0: 1 rx pipe, 2 tx pipes urtwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps urtwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps uaudio0 at uhub1 port 4 configuration 1 interface 0 uaudio0: Dell (0x413c) Dell AC511 USB SoundBar (0xa503), rev 1.10/1.10, addr 4 uaudio0: ignored input endpoint of type adaptive uaudio0: audio rev 1.00 audio0 at uaudio0: full duplex, playback, capture, mmap, independent audio0: slinear_le:16 2ch 48000Hz, blk 60ms for playback spkr0 at audio0: PC Speaker (synthesized) wsbell at spkr0 not configured uhidev0 at uhub1 port 4 configuration 1 interface 3 uhidev0: Dell (0x413c) Dell AC511 USB SoundBar (0xa503), rev 1.10/1.10, addr 4, iclass 3/0 uhid0 at uhidev0: input=1, output=0, feature=0 uhub0: autoconfiguration error: illegal enable change, port 1 WARNING: 3 errors while detecting hardware; check system log. boot device: ld1 root on ld1a dumps on ld1b root file system type: ffs kern.module.path=/stand/evbarm/8.99.41/modules wsdisplay0: screen 4 added (default, vt100 emulation)