Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2019-05-28 23:42:44
From: yamori813
Description: Buffalo_WER-AM54G54
---<<BOOT>>---
SDRMCTL 640088 c00 2000000 0
FLASHCTL 100e3ce1
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT b4de3bc3de6(zrouter)-dirty Buffalo_WER-AM54G54 mips
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU model: Atheros AR5312 rev 2
real memory  = 33554432 (32768K bytes)
avail memory = 28553216 (27MB)
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
nexus0: <MIPS32 root nexus>
cpupic0: <MIPS32 Interrupt Controller> on nexus0
apb0: <APB Bus bridge INTRNG> at irq 4 on nexus0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 110000000 Hz quality 800
Event timer "MIPS32" frequency 110000000 Hz quality 800
uart0: <16550 or compatible> on apb0
uart0: console (9600,n,8,1)
gpio0: <Atheros AR531x GPIO driver> on apb0
gpio0: [GIANT-LOCKED]
gpio0: gpio pinmask=0xff
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
ar5315_wdog0: <Atheros AR531x watchdog timer> on apb0
cfi0 at mem 0xbfc00000-0xbfffffff on nexus0
cfi0: Manufacturer ID:c2 Device ID:22a7
cfid0 on cfi0
are0: <AR531x Ethernet interface> at mem 0x18100000-0x181fffff irq 1 on nexus0
are0: Ethernet address: [_MAC_XXXXXXXXXX]
cpupic0: [GIANT-LOCKED]
are1: <AR531x Ethernet interface> at mem 0x18200000-0x182fffff irq 2 on nexus0
are1: Ethernet address: [_MAC_XXXXXXXXXX]
cpupic0: [GIANT-LOCKED]
aremdio0: <Atheros AR531x built-in ethernet interface, MDIO controller> at mem 0x18100000-0x181fffff on nexus0
mdio0: <MDIO> on aremdio0
mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
ukswitch0: <Generic MDIO switch driver> on mdio0
miibus0: <MII bus> on ukswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus1: <MII bus> on ukswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 2 on miibus1
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus2: <MII bus> on ukswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 3 on miibus2
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus3: <MII bus> on ukswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 4 on miibus3
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
miibus4: <MII bus> on ukswitch0
ukphy4: <Generic IEEE 802.3u media interface> PHY 5 on miibus4
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
etherswitch0: <Switch controller> on ukswitch0
mdio1: <MDIO> on ukswitch0
mdioproxy1: <MII/MDIO proxy, MDIO side> on mdio1
Timecounters tick every 1.000 msec
ukswitch0port0: link state changed to DOWN
ukswitch0port1: link state changed to DOWN
ukswitch0port2: link state changed to DOWN
ukswitch0port3: link state changed to DOWN
ukswitch0port4: link state changed to DOWN
Trying to mount root from cd9660:/dev/redboot/rootfs.uzip []...
g_dev_taste: make_dev_p() failed (gp->name=redboot/RedBoot config, error=22)
g_dev_taste: make_dev_p() failed (gp->name=redboot/FIS directory, error=22)
Warning: no time-of-day clock registered, system time will not be set accurately
ukswitch0port0: link state changed to UP

random: unblocking device.
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME