Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-06-01 16:34:32
From: Bryce Chidester
Description: Sun Fire T1000 24 cores @ 1000Mhz, 8GB RAM
console is /virtual-devices@100/console@1
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.5 (GENERIC.MP) #159: Sun Apr 14 04:37:58 MDT 2019
    [_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 8455716864 (8064MB)
avail mem = 8286183424 (7902MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire(TM) T1000
cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu2 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu3 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu4 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu5 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu6 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu7 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu8 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu9 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu10 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu11 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu12 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu13 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu14 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu15 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu16 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu17 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu18 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu19 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu20 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu21 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu22 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu23 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
cbus0 at vbus0
vldc0 at cbus0
vldcp0 at vldc0 chan 0x0: ivec 0x0, 0x1 channel "hvctl"
"ldom-primary" at vldc0 chan 0x1 not configured
"fmactl" at vldc0 chan 0x3 not configured
vldc1 at cbus0
"ldmfma" at vldc1 chan 0x4 not configured
vldc2 at cbus0
vldcp1 at vldc2 chan 0x14: ivec 0x28, 0x29 channel "spds"
"system-management" at vldc2 chan 0xd not configured
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
"fma" at vbus0 not configured
"sunvts" at vbus0 not configured
"sunmc" at vbus0 not configured
"explorer" at vbus0 not configured
"led" at vbus0 not configured
"flashupdate" at vbus0 not configured
"ncp" at vbus0 not configured
vpci0 at mainbus0: bus 2 to 2, dvma map 80000000-ffffffff
pci0 at vpci0
ebus0 at mainbus0
com0 at ebus0 addr c2c000-c2c007 ivec 0xa: st16650, 32 byte fifo
vpci1 at mainbus0: bus 2 to 4, dvma map 80000000-ffffffff
pci1 at vpci1
ppb0 at pci1 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci2 at ppb0 bus 3
bge0 at pci2 dev 4 function 0 "Broadcom BCM5714" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x7d4, address [_MAC_XXXXXXXXXX]
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci2 dev 4 function 1 "Broadcom BCM5714" rev 0xa2, BCM5715 A1 (0x9001): ivec 0x7d5, address [_MAC_XXXXXXXXXX]
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb1 at pci2 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb3
pci3 at ppb1 bus 4
bge2 at pci3 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): ivec 0x7c2, address [_MAC_XXXXXXXXXX]
brgphy2 at bge2 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge3 at pci3 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0 (0x2100): ivec 0x7c1, address [_MAC_XXXXXXXXXX]
brgphy3 at bge3 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
mpi0 at pci3 dev 2 function 0 "Symbios Logic SAS1064" rev 0x02: msi
mpi0: UNUSED, firmware[_IP_XX]
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Corsair Force 3, 3> SCSI3 0/direct fixed naa.0000000000000000
sd0: 57241MB, 512 bytes/sector, 117231408 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@7c0,0/pci@0,0/pci@8,0/scsi@2,0/disk@0,0
root on sd0a (81a3141771eb19b7.a) swap on sd0b dump on sd0b