Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ].


Date: 2019-06-06 03:44:32
From: afresh1
Description: OpenBSD 6.5-current (GENERIC) armv7 on TI AM335x BeagleBone Black
OpenBSD 6.5-current (GENERIC) #177: Sat May 25 17:02:51 MDT 2019
    [_EMAIL_XXXXXXXXXXXXXXXX]:/usr/src/sys/arch/armv7/compile/GENERIC
real mem  = 477687808 (455MB)
avail mem = 458031104 (436MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0: ARM Cortex-A8 r3p2 (ARMv7)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
"wkup_m3" at simplebus1 not configured
simplebus2 at simplebus1: "prcm"
"l4_per_cm" at simplebus2 not configured
"l4_wkup_cm" at simplebus2 not configured
"mpu_cm" at simplebus2 not configured
"l4_rtc_cm" at simplebus2 not configured
"gfx_l3_cm" at simplebus2 not configured
"l4_cefuse_cm" at simplebus2 not configured
simplebus3 at simplebus1: "scm"
syscon0 at simplebus3: "scm_conf"
pinctrl0 at simplebus3
"wkup_m3_ipc" at simplebus3 not configured
"dma-router" at simplebus3 not configured
intc0 at simplebus0 rev 5.0
"edma" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
"tptc" at simplebus0 not configured
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"atmel,24c256" at iic0 addr 0x50 not configured
nxphdmi0 at iic0 addr 0x70: rev 0x0301
nxphdmi0: no display detected
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"atmel,24c256" at iic1 addr 0x54 not configured
"atmel,24c256" at iic1 addr 0x55 not configured
"atmel,24c256" at iic1 addr 0x56 not configured
"atmel,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
"spinlock" at simplebus0 not configured
omdog0 at simplebus0 rev 0.1
"mailbox" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"timer" at simplebus0 not configured
"rtc" at simplebus0 not configured
"usb" at simplebus0 not configured
cpsw0 at simplebus0: version 1.12 (0), address [_MAC_XXXXXXXXXX]
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
"ocmcram" at simplebus0 not configured
amdisplay0 at simplebus0
amdisplay0: no display attached.
"emif" at simplebus0 not configured
"sham" at simplebus0 not configured
"aes" at simplebus0 not configured
"mcasp" at simplebus0 not configured
"rng" at simplebus0 not configured
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, , 0002> SCSI2 0/direct removable
sd0: 30223MB, 512 bytes/sector, 61896704 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct removable
sd1: 1832MB, 512 bytes/sector, 3751936 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (083fd9a27e4f0e62.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!