Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-07-01 15:01:36
From: oleg
Description: FreeBSD12 binary update
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE-p6 GENERIC i386 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2800.07-MHz 686-class CPU) Origin="GenuineIntel" Id=0xf47 Family=0xf Model=0x4 Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant real memory = 2147483648 (2048 MB) avail memory = 2063466496 (1967 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <A_M_I_ OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1400034009 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0x15f94d0, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <\M^?\M^?\M^?\M^?\M^?\M^? \M^?\M^?\M^?\M^?\M^?\M^?\M^?\M^?> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xa400-0xa407 mem 0xdfd00000-0xdfd7ffff,0xe0000000-0xefffffff,0xdfd80000-0xdfdbffff irq 16 at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci1: <ACPI PCI bus> on pcib2 ae0: <Attansic Technology Corp, L2 FastEthernet> mem 0xdffc0000-0xdfffffff irq 17 at device 0.0 on pci1 ae0: Using MSI messages. miibus0: <MII bus> on ae0 atphy0: <Atheros F2 10/100 PHY> PHY 0 on miibus0 atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ae0: Ethernet address: xx:xx:xx:xx:xx:xx ae0: Deprecated code (to be removed in FreeBSD 13): see https://github.com/freebsd/fcp/blob/master/fcp-0101.md uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0xa800-0xa81f irq 20 at device 29.0 on pci0 uhci0: LegSup = 0x2f00 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0xb000-0xb01f irq 17 at device 29.1 on pci0 uhci1: LegSup = 0x2f00 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0xb400-0xb41f irq 18 at device 29.2 on pci0 uhci2: LegSup = 0x2f00 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0xb800-0xb81f irq 19 at device 29.3 on pci0 uhci3: LegSup = 0x2f00 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdfdffc00-0xdfdfffff irq 20 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib3 rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xdfeffc00-0xdfeffcff irq 21 at device 1.0 on pci2 miibus1: <MII bus> on rl0 rlphy0: <RealTek internal media interface> PHY 0 on miibus1 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: yy:yy:yy:yy:yy:yy isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 acpi_button0: <Power Button> on acpi0 fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Timecounters tick every 1.000 msec ugen4.1: <Intel EHCI root HUB> at usbus4 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen2.1: <Intel UHCI root HUB> at usbus2 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen0.1: <Intel UHCI root HUB> at usbus0 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen3.1: <Intel UHCI root HUB> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <ST380815AS 3.AAD> ATA-7 SATA 1.x device ada0: [_SERIAL_NUMBER_] ada0: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada0: 76319MB (156301488 512 byte sectors) ada1 at ata1 bus 0 scbus1 target 0 lun 0 ada1: <ST250DM000-1BD141 KC48> ATA8-ACS SATA 3.x device ada1: [_SERIAL_NUMBER_] ada1: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada1: 238475MB (488397168 512 byte sectors) ada1: quirks=0x1<4K> ada2 at ata1 bus 0 scbus1 target 1 lun 0 ada2: <ST250DM000-1BD141 KC48> ATA8-ACS SATA 3.x device ada2: [_SERIAL_NUMBER_] ada2: 150.000MB/s transfers (SATA, UDMA5, PIO 8192bytes) ada2: 238475MB (488397168 512 byte sectors) ada2: quirks=0x1<4K> Trying to mount root from ufs:/dev/mirror/d0a [rw]... GEOM_CONCAT: Device squid_cache created (id=3707197578). GEOM_CONCAT: Disk ada0p6 attached to squid_cache. GEOM_CONCAT: Disk ada1p6 attached to squid_cache. GEOM_MIRROR: Device mirror/d0a launched (3/3). GEOM_MIRROR: Device mirror/d0d launched (3/3). GEOM_MIRROR: Device mirror/d0e launched (3/3). GEOM_CONCAT: Disk ada2p6 attached to squid_cache. GEOM_CONCAT: Device concat/squid_cache activated. uhub0: 8 ports with 8 removable, self powered lo0: link state changed to UP ae0: link state changed to DOWN rl0: link state changed to DOWN ae0: link state changed to UP rl0: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled DUMMYNET 0x7017000 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched FQ_CODEL loaded load_dn_sched dn_sched FQ_PIE loaded load_dn_aqm dn_aqm CODEL loaded load_dn_aqm dn_aqm PIE loaded