Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-07-07 19:58:25
From: tuexen
Description: Black Bird (Power9)
---<<BOOT>>--- Copyright (c) 1992-2019 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.0-CURRENT r349828 TCP-NODEBUG powerpc gcc version 4.2.1 20070831 patched [FreeBSD] VT: init without driver. cpu0: IBM POWER9 revision 2.2, 3000.00 MHz cpu0: Features dc007182<PPC32,PPC64,ALTIVEC,FPU,MMU,SMT,ISNOOP,ARCH205,ARCH206,VSX,TRUELE> cpu0: Features2 ffe00000<ARCH207,HTM,DSCR,ISEL,TAR,VCRYPTO,HTMNOSC,ARCH300,IEEE128,DARN> real memory = 68622589952 (65443 MB) avail memory = 65753731072 (62707 MB) FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. random: entropy device external interface 000.000016 [4254] netmap_init netmap: loaded module random: registering fast source PowerISA DARN random number generator random: fast provider: "PowerISA DARN random number generator" kbd0 at kbdmux0 ofwbus0: <Open Firmware Device Tree> on nexus0 opal0: <OPAL Abstraction Firmware> irq 1048560,1048561,1048562,1048563,1048564,1048565,1048566,1048567,1048568,1048569,1048570,1048571,1048572,1048573 on ofwbus0 opal0: registered as a time-of-day clock, resolution 0.002000s simplebus0: <Flattened device tree simple bus> mem 0x6030000000000-0x60300ffffffff on ofwbus0 pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff on ofwbus0 pci0: <OFW PCI bus> numa-domain 0 on pcib0 pcib1: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci0 pci1: <OFW PCI bus> numa-domain 0 on pcib1 pcib2: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff on ofwbus0 pci2: <OFW PCI bus> numa-domain 0 on pcib2 pcib3: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci2 pci3: <OFW PCI bus> numa-domain 0 on pcib3 pcib4: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff on ofwbus0 pci4: <OFW PCI bus> numa-domain 0 on pcib4 pcib5: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci4 pci5: <OFW PCI bus> numa-domain 0 on pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib4: failed to reserve resource for pcib5 pcib6: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff on ofwbus0 pci6: <OFW PCI bus> numa-domain 0 on pcib6 pcib7: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci6 pci7: <OFW PCI bus> numa-domain 0 on pcib7 pcib8: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff on ofwbus0 pci8: <OFW PCI bus> numa-domain 0 on pcib8 pcib9: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8 pci9: <OFW PCI bus> numa-domain 0 on pcib9 pcib10: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff on ofwbus0 pci10: <OFW PCI bus> numa-domain 0 on pcib10 pcib11: <OFW PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10 pci11: <OFW PCI bus> numa-domain 0 on pcib11 pcib12: <OFW PCI-PCI bridge> irq 1030136 at device 0.0 numa-domain 0 on pci11 pci12: <OFW PCI bus> numa-domain 0 on pcib12 xive0: <External Interrupt Virtualization Engine> mem 0x6030203180000-0x603020318ffff,0x6030203190000-0x603020319ffff,0x60302031a0000-0x60302031affff,0x60302031b0000-0x60302031bffff on ofwbus0 xivevc0: <External Interrupt Virtualization Engine Root> on ofwbus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 pmcr0: <Power Management Control Register> on cpu0 cpu1: <Open Firmware CPU> on cpulist0 pmcr1: <Power Management Control Register> on cpu1 cpu2: <Open Firmware CPU> on cpulist0 pmcr2: <Power Management Control Register> on cpu2 cpu3: <Open Firmware CPU> on cpulist0 pmcr3: <Power Management Control Register> on cpu3 cpu4: <Open Firmware CPU> on cpulist0 pmcr4: <Power Management Control Register> on cpu4 cpu5: <Open Firmware CPU> on cpulist0 pmcr5: <Power Management Control Register> on cpu5 cpu6: <Open Firmware CPU> on cpulist0 pmcr6: <Power Management Control Register> on cpu6 cpu7: <Open Firmware CPU> on cpulist0 pmcr7: <Power Management Control Register> on cpu7 opalcons0: <OPAL Consoles> on opal0 uart0: <OPAL Serial Port> on opalcons0 uart0: console opalflash0: <OPAL System Flash> on opal0 opalsens0: <OPAL Sensors> on opal0 opal_sensor0: <OPAL sensor> on opalsens0 opal_sensor1: <OPAL sensor> on opalsens0 opal_sensor2: <OPAL sensor> on opalsens0 opal_sensor3: <OPAL sensor> on opalsens0 opal_sensor4: <OPAL sensor> on opalsens0 opal_sensor5: <OPAL sensor> on opalsens0 opal_sensor6: <OPAL sensor> on opalsens0 opal_sensor7: <OPAL sensor> on opalsens0 opal_sensor8: <OPAL sensor> on opalsens0 opal_sensor9: <OPAL sensor> on opalsens0 opal_sensor10: <OPAL sensor> on opalsens0 opal_sensor11: <OPAL sensor> on opalsens0 opal_sensor12: <OPAL sensor> on opalsens0 opal_sensor13: <OPAL sensor> on opalsens0 opal_sensor14: <OPAL sensor> on opalsens0 opal_sensor15: <OPAL sensor> on opalsens0 opal_sensor16: <OPAL sensor> on opalsens0 opal_sensor17: <OPAL sensor> on opalsens0 opal_sensor18: <OPAL sensor> on opalsens0 opal_sensor19: <OPAL sensor> on opalsens0 opal_sensor20: <OPAL sensor> on opalsens0 opal_sensor21: <OPAL sensor> on opalsens0 opal_sensor22: <OPAL sensor> on opalsens0 opal_sensor23: <OPAL sensor> on opalsens0 opal_sensor24: <OPAL sensor> on opalsens0 opal_sensor25: <OPAL sensor> on opalsens0 opal_sensor26: <OPAL sensor> on opalsens0 opal_sensor27: <OPAL sensor> on opalsens0 opal_sensor28: <OPAL sensor> on opalsens0 opal_sensor29: <OPAL sensor> on opalsens0 opal_sensor30: <OPAL sensor> on opalsens0 opal_sensor31: <OPAL sensor> on opalsens0 opal_sensor32: <OPAL sensor> on opalsens0 opal_sensor33: <OPAL sensor> on opalsens0 opal_sensor34: <OPAL sensor> on opalsens0 opal_sensor35: <OPAL sensor> on opalsens0 opal_sensor36: <OPAL sensor> on opalsens0 opal_sensor37: <OPAL sensor> on opalsens0 ahci0: <Marvell 88SE9235 AHCI SATA controller> mem 0x80000000-0x800007ff irq 1038328 at device 0.0 numa-domain 0 on pci5 ahci0: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 bge0: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x6024000000000-0x602400000ffff,0x6024000010000-0x602400001ffff,0x6024000020000-0x602400002ffff irq 1032184 at device 0.0 numa-domain 0 on pci9 bge0: APE FW version: NCSI v1.3.12.0 bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus0: <MII bus> numa-domain 0 on bge0 brgphy0: <BCM5719C 1000BASE-T media interface> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Using defaults for TSO: 65518/35/2048 bge0: Ethernet address: [_MAC_XXXXXXXXXX] bge1: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x6024000030000-0x602400003ffff,0x6024000040000-0x602400004ffff,0x6024000050000-0x602400005ffff irq 1032185 at device 0.1 numa-domain 0 on pci9 bge1: APE FW version: NCSI v1.3.12.0 bge1: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus1: <MII bus> numa-domain 0 on bge1 brgphy1: <BCM5719C 1000BASE-T media interface> PHY 2 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Using defaults for TSO: 65518/35/2048 bge1: Ethernet address: [_MAC_XXXXXXXXXX] bge2: <Broadcom unknown BCM5719, ASIC rev. 0x5719001> mem 0x6024000060000-0x602400006ffff,0x6024000070000-0x602400007ffff,0x6024000080000-0x602400008ffff irq 1032184 at device 0.2 numa-domain 0 on pci9 bge2: APE FW version: NCSI v1.3.12.0 bge2: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E miibus2: <MII bus> numa-domain 0 on bge2 brgphy2: <BCM5719C 1000BASE-T media interface> PHY 3 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge2: Using defaults for TSO: 65518/35/2048 bge2: Ethernet address: [_MAC_XXXXXXXXXX] vgapci0: <VGA-compatible display> mem 0x80000000-0x80ffffff,0x81000000-0x8101ffff irq 1030136 at device 0.0 numa-domain 0 on pci12 powernv_xscom0: <xscom> mem 0x603fc00000000-0x60403ffffffff on ofwbus0 opal_i2cm0: <centaur-i2cm> on powernv_xscom0 iichb0: <opal-i2c> on opal_i2cm0 iicbus0: <OFW I2C bus> on iichb0 iic0: <I2C generic I/O> on iicbus0 iicbus0: <unknown card> at addr 0xa0 iichb1: <opal-i2c> on opal_i2cm0 iicbus1: <OFW I2C bus> on iichb1 iic1: <I2C generic I/O> on iicbus1 iicbus1: <unknown card> at addr 0xa0 opal_i2cm1: <centaur-i2cm> on powernv_xscom0 iichb2: <opal-i2c> on opal_i2cm1 iicbus2: <OFW I2C bus> on iichb2 iic2: <I2C generic I/O> on iicbus2 iicbus2: <unknown card> at addr 0xa0 opal_i2cm2: <centaur-i2cm> on powernv_xscom0 iichb3: <opal-i2c> on opal_i2cm2 iicbus3: <OFW I2C bus> on iichb3 iic3: <I2C generic I/O> on iicbus3 iicbus3: <unknown card> at addr 0xa0 iichb4: <opal-i2c> on opal_i2cm2 iicbus4: <OFW I2C bus> on iichb4 iic4: <I2C generic I/O> on iicbus4 iicbus4: <unknown card> at addr 0xa8 cryptosoft0: <software crypto> on nexus0 Timecounter "timebase" frequency 512000000 Hz quality 0 Event timer "decrementer" frequency 512000000 Hz quality 1000 Timecounters tick every 1.000 msec usb_needs_explore_all: no devclass ada0 at ahcich3 bus 0 scbus3 target 0 lun 0 ada0: <Samsung SSD 860 PRO 1TB RVM01B6Q> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 976762MB (2000409264 512 byte sectors) TCP Hpts created 32 swi interrupt threads and bound 0 to cpus Trying to mount root from ufs:/dev/ada0p2 []... Launching APs: 7 3 1 6 2 5 31 30 9 15 18 17 13 4 27 10 24 28 11 23 25 8 26 22 21 16 20 29 12 19 14 cd0 at ahcich0 bus 0 scbus0 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GH10N EV03> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present random: unblocking device. lo0: link state changed to UP bge2: link state changed to DOWN bge2: link state changed to UP icee0: <AT24C512> at addr 0xa0 on iicbus0 icee1: <AT24C128> at addr 0xa0 on iicbus1 icee2: <AT24C128> at addr 0xa0 on iicbus2