Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.


Date: 2019-08-18 03:39:37
From: yamori813
Description: Fon_FON2305E_FDT with gpiopps
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #4 6f390e7(zrouter)-dirty: Mon Jun 18 08:38:04 JST 2018
    hiroki@microserver:/storage/home/hiroki/zorg/obj/storage/home/hiroki/zorg/ZRouter/tmp/storage/home/hiroki/freebsd/mips.mipsel/sys/Fon_FON2305E_FDT mips
gcc version 4.2.1 20070831 patched [FreeBSD]
Preloaded elf kernel "kernel" at 0x803e85c0.
real memory  = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00481000 - 0x01f80fff, 28311552 bytes (6912 pages)
avail memory = 27717632 (26MB)
arc4random: no preloaded entropy cache
ULE: setup cpu 0
random: entropy device external interface
firmware: 'rt2860fw' version 0: 8192 bytes loaded at 0x80387f70
firmware: 'rt2561fw' version 0: 8192 bytes loaded at 0x80381df0
firmware: 'rt2561sfw' version 0: 8192 bytes loaded at 0x80383e70
firmware: 'rt2661fw' version 0: 8192 bytes loaded at 0x80385ef0
wlan: <802.11 Link Layer>
null: <full device, null device, zero device>
openfirm: <Open Firmware control device>
mem: <memory>
nexus0: <MIPS32 root nexus>
random: harvesting attach, 8 bytes (4 bits) from nexus0
ofwbus0: <Open Firmware Device Tree> on nexus0
palmbus0: <MTK Palmbus> mem 0x10000000-0x101fffff on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from palmbus0
random: harvesting attach, 8 bytes (4 bits) from ofwbus0
cpupic0: <MIPS32 Interrupt Controller> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from cpupic0
sysc0: <MTK System Controller> mem 0-0xff on palmbus0
random: harvesting attach, 8 bytes (4 bits) from sysc0
pinctrl0: <MTK Pin Controller> on ofwbus0
pinctrl0: GPIO mode start: 0x0000029d
Processing 1 pin-config node(s) in pinctrl-0 for spi@b00
Processing 1 pin-config node(s) in pinctrl-0 for uartlite@c00
Processing 1 pin-config node(s) in pinctrl-0 for pinctrl
pinctrl0: GPIO mode end  : 0x000002d5
random: harvesting attach, 8 bytes (4 bits) from pinctrl0
rstctrl0: <MTK Reset Controller> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from rstctrl0
clkctrl0: <MTK Clock Controller> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from clkctrl0
intc0: <MTK Interrupt Controller (v2)> mem 0x200-0x2ff irq 6 on palmbus0
random: harvesting attach, 8 bytes (4 bits) from intc0
gpio0: <MTK GPIO Controller (v1)> mem 0x600-0x633 irq 9 on palmbus0
gpiobus0: <OFW GPIO bus> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpiobus0
random: harvesting attach, 8 bytes (4 bits) from gpio0
cpulist0: <Open Firmware CPU Group> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from cpulist0
palmbus0: <timer@100> mem 0x100-0x11f irq 4 compat ralink,rt3050-timer (no driver attached)
palmbus0: <watchdog@120> mem 0x120-0x12f irq 5 compat ralink,rt3050-wdt (no driver attached)
palmbus0: <memc@300> mem 0x300-0x3ff irq 7 compat ralink,rt3050-memc (no driver attached)
uart0: <MTK UART Controller> mem 0x500-0x5ff irq 8 on palmbus0
uart0: fast interrupt
uart0: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart0
gpioc0: <GPIO controller> on gpio0
random: harvesting attach, 8 bytes (4 bits) from gpioc0
palmbus0: <gpio@638> mem 0x638-0x65b disabled compat ralink,rt3050-gpio (no driver attached)
palmbus0: <gpio@660> mem 0x660-0x683 disabled compat ralink,rt3050-gpio (no driver attached)
spi0: <MTK SPI Controller (v1)> mem 0xb00-0xbff on palmbus0
spibus0: <OFW SPI bus> on spi0
mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0
mx25l0: device type mx25ll64, size 8192K in 128 sectors of 64K, erase size 64K
random: harvesting attach, 8 bytes (4 bits) from mx25l0
random: harvesting attach, 8 bytes (4 bits) from spibus0
random: harvesting attach, 8 bytes (4 bits) from spi0
uart1: <MTK UART Controller> mem 0xc00-0xcff irq 10 on palmbus0
uart1: console (57971,n,8,1)
uart1: fast interrupt
uart1: PPS capture mode: DCD
random: harvesting attach, 8 bytes (4 bits) from uart1
ofwbus0: <usbphy> compat ralink,rt3050-usbphy (no driver attached)
rt0: <Ralink RT3050 onChip Ethernet driver> mem 0x10100000-0x1010ffff irq 0 on ofwbus0
rt0: RT305XF Ethernet MAC (rev 0x00000000)
rt0: use hardcoded [_MAC_XXXXXXXXXX] macaddr
rt0: bpf attached
rt0: Ethernet address: [_MAC_XXXXXXXXXX]
random: harvesting attach, 8 bytes (4 bits) from rt0
mtkswitch0: <MTK Switch Driver> mem 0x10110000-0x10117fff irq 1 on ofwbus0
miibus0: <MII bus> on mtkswitch0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: OUI 0x000c43, model 0x0001, rev. 7
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy0
random: harvesting attach, 8 bytes (4 bits) from miibus0
miibus1: <MII bus> on mtkswitch0
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy1: OUI 0x000c43, model 0x0001, rev. 7
ukphy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy1
random: harvesting attach, 8 bytes (4 bits) from miibus1
miibus2: <MII bus> on mtkswitch0
ukphy2: <Generic IEEE 802.3u media interface> PHY 2 on miibus2
ukphy2: OUI 0x000c43, model 0x0001, rev. 7
ukphy2:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy2
random: harvesting attach, 8 bytes (4 bits) from miibus2
miibus3: <MII bus> on mtkswitch0
ukphy3: <Generic IEEE 802.3u media interface> PHY 3 on miibus3
ukphy3: OUI 0x000c43, model 0x0001, rev. 7
ukphy3:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy3
random: harvesting attach, 8 bytes (4 bits) from miibus3
miibus4: <MII bus> on mtkswitch0
ukphy4: <Generic IEEE 802.3u media interface> PHY 4 on miibus4
ukphy4: OUI 0x000c43, model 0x0001, rev. 7
ukphy4:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
random: harvesting attach, 8 bytes (4 bits) from ukphy4
random: harvesting attach, 8 bytes (4 bits) from miibus4
etherswitch0: <Switch controller> on mtkswitch0
random: harvesting attach, 8 bytes (4 bits) from etherswitch0
mdio0: <MDIO> on mtkswitch0
random: harvesting attach, 8 bytes (4 bits) from mdio0
random: harvesting attach, 8 bytes (4 bits) from mtkswitch0
ofwbus0: <wmac@10180000> mem 0x10180000-0x101bffff irq 2 compat ralink,rt3050-wmac (no driver attached)
ofwbus0: <otg@101c0000> mem 0x101c0000-0x101fffff irq 3 compat ralink,rt3050-otg (no driver attached)
gpioled0: <GPIO LEDs> on ofwbus0
random: harvesting attach, 8 bytes (4 bits) from gpioled0
gpiopps0: <GPIO PPS> on ofwbus0
gpiopps0: PPS input on gpio0 pin 12
random: harvesting attach, 8 bytes (4 bits) from gpiopps0
clock0: <Generic MIPS32 ticker> on nexus0
Timecounter "MIPS32" frequency 160000000 Hz quality 800
Event timer "MIPS32" frequency 160000000 Hz quality 800
random: harvesting attach, 8 bytes (4 bits) from clock0
Device configuration finished.
Timecounters tick every 10.000 msec
lo0: bpf attached
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 512
mtkswitch0port0: link state changed to DOWN
mtkswitch0port1: link state changed to DOWN
mtkswitch0port2: link state changed to DOWN
mtkswitch0port3: link state changed to DOWN
mtkswitch0port4: link state changed to DOWN
GEOM: new disk flash/spi0
Trying to mount root from cd9660:/dev/flash/spi0s.rootfs.uzip []...
flash/spi0: slice 00000000-0000ffff: u-boot (63KB)
flash/spi0: slice 00010000-0001ffff: u-boot-env (63KB)
flash/spi0: slice 00020000-0014ffff: firmware (1215KB)
flash/spi0: slice 00150000-007fffff: rootfs (6847KB)
flash/spi0: slice 00020000-007fffff: upgrade (8063KB)
cd9660: RockRidge Extension
Warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
mtkswitch0port2: link state changed to UP
mtkswitch0port0: link state changed to UP
mtkswitch0port2: link state changed to DOWN
mtkswitch0port2: link state changed to UP
random: unblocking device.
lo0: link state changed to UP
/tmp: optimization changed from SPACE to TIME