Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2019-08-18 22:53:57
From: Squat
Description: FreeBSD/amd64 on HP ProLiant DL360 G6
---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE-p8 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): text 80x25 CPU: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz (2266.79-MHz K8-class CPU) Origin="GenuineIntel" Id=0x106a5 Family=0x6 Model=0x1a Stepping=5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,VPID TSC: P-state invariant, performance statistics real memory = 6442450944 (6144 MB) avail memory = 6182801408 (5896 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <HP ProLiant> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20181003/tbfadt-850) Firmware Warning (ACPI): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20181003/tbfadt-850) ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic0 <Version 2.0> irqs 0-23 on motherboard Launching APs: 1 2 6 3 4 5 7 Timecounter "TSC-low" frequency 1133395961 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HP ProLiant> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 ciss0: <HP Smart Array P410i> port 0x4000-0x40ff mem 0xfbe00000-0xfbffffff,0xfbdf0000-0xfbdf0fff irq 28 at device 0.0 on pci1 ciss0: PERFORMANT Transport pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 8.0 on pci0 pci8: <ACPI PCI bus> on pcib8 bce0: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci8 miibus0: <MII bus> on bce0 brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: [_MAC_XXXXXXXXXX] bce0: bce0: link state changed to DOWN ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (4.6.4); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 1.0.3) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: <HP NC382i DP Multifunction Gigabit Server Adapter (C0)> mem 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci8 miibus1: <MII bus> on bce1 brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: [_MAC_XXXXXXXXXX] bce1: bce1: link state changed to DOWN ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 5Gbps); B/C (4.6.4); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 1.0.3) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib9: <ACPI PCI-PCI bridge> at device 9.0 on pci0 pci9: <ACPI PCI bus> on pcib9 pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci0 pci10: <ACPI PCI bus> on pcib10 pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached) pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached) uhci0: <Intel 82801JI (ICH10) USB controller USB-A> port 0x1000-0x101f irq 20 at device 29.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: <Intel 82801JI (ICH10) USB controller USB-B> port 0x1020-0x103f irq 23 at device 29.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: <Intel 82801JI (ICH10) USB controller USB-C> port 0x1040-0x105f irq 22 at device 29.2 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: <Intel 82801JI (ICH10) USB controller USB-F> port 0x1060-0x107f irq 23 at device 29.3 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xf5df0000-0xf5df03ff irq 20 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 usbus4: 480Mbps High Speed USB v2.0 pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci11: <ACPI PCI bus> on pcib11 vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem 0xe8000000-0xefffffff,0xf5ff0000-0xf5ffffff irq 23 at device 3.0 on pci11 vgapci0: Boot video device uhci4: <HP iLO Standard Virtual USB controller> port 0x3800-0x381f irq 22 at device 4.4 on pci11 usbus5 on uhci4 usbus5: 12Mbps Full Speed USB v1.0 pci11: <serial bus> at device 4.6 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH10 SATA300 controller> port 0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af,0x10b0-0x10bf irq 17 at device 31.2 on pci0 ata2: <ATA channel> at channel 0 on atapci0 ata3: <ATA channel> at channel 1 on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_syscontainer0: <System Container> port 0x2e-0x2f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x31f on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff pnpid ORM0000 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 uart1: <Non-standard ns8250 class UART with FIFOs> at port 0x2f8 irq 3 on isa0 uart1: non-PNP ISA device will be removed from GENERIC in FreeBSD 12. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est1 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est2 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est3 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est4 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est5 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est6 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 12 device_attach: est7 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ugen3.1: <Intel UHCI root HUB> at usbus3 ugen1.1: <Intel UHCI root HUB> at usbus1 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen0.1: <Intel UHCI root HUB> at usbus0 ugen2.1: <Intel UHCI root HUB> at usbus2 ugen5.1: <HP UHCI root HUB> at usbus5 ugen4.1: <Intel EHCI root HUB> at usbus4 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 uhub4: <HP UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub4: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered ugen5.2: <HP Virtual Keyboard> at usbus5 ukbd0 on uhub4 ukbd0: <Virtual Keyboard> on usbus5 kbd2 at ukbd0 da0 at ciss0 bus 0 scbus0 target 0 lun 0 da0: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da0: 135.168MB/s transfers da0: Command Queueing enabled da0: 139979MB (286677120 512 byte sectors) da1 at ciss0 bus 0 scbus0 target 1 lun 0 da1: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device da1: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da1: 135.168MB/s transfers da1: Command Queueing enabled da1: 139979MB (286677120 512 byte sectors) cd0 at ata2 bus 0 scbus2 target 0 lun 0 cd0: <Optiarc DVD RW AD-7561S AH52> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXXXXX] cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus4 Root mount waiting for: usbus4 uhub3: 8 ports with 8 removable, self powered lo0: link state changed to UP bce0: Gigabit link up! bce0: link state changed to UP bce0: Gigabit link up! bce0: Gigabit link up! ums0 on uhub4 ums0: <Virtual Mouse> on usbus5 ums0: 3 buttons and [XY] coordinates ID=0 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled